1402分段换板处UT
UT inspection for changing plate of block 1402
FR49纵舱壁上工艺孔
butt welding ams of technical opening in the long.bulkhead for Fr49
工艺孔（1#油渣舱）补板
CLosing plate for technical opening in SL Tk 1
2728主甲板与角隅板角焊缝
Fillet welding ams between main deck and corner plate in block 2728
杂物吊对接焊缝
butt welding ams of provision crane
舱口盖8BP/S对接焊缝
butt welding ams of hatch cover No.8B(P/S)
FR270外板、主甲板、内纵壁、扁钢对接焊缝
butt welding ams of shell plate、main deck、flat bar、inner longitudinal bulkhead on Fr.270
FR150舱口围面板、腹板对接焊缝
Butt welding ams of (top plate)(面板)and（web frame）（腹板）of hatch coaming on Fr.150
舵叶封板对接焊缝（内/外）
Butt welding ams of rudder blade closing plate(inside/outside)
主机座对接焊缝
butt welding ams of M/E foundation
FR49外板工艺孔
butt welding ams of technical opening on Fr49
1203分段尾轴管对接焊缝
butt welding ams of shaft boss of block 1203
1103分段尾轴管铸钢件与钢板对接焊缝
butt welding ams between steel castings and steel plate of shaft boss block 1103
1203分段尾轴管管子纵向焊缝
Longitudinal am of stern shaft tube of block 1203
1113舵叶分段，钢板与铸钢件对接焊缝
butt welding ams of steel plate and casting steel of block 1113
3416/26箱角对接焊缝
butt welding ams of container sockets in block 3416/26
主机行车吊梁/机修间行车吊梁
butt welding ams of the beam for ER crane
1136分段挂舵壁对接焊缝
butt welding ams of rudder horn in block 1136
FR80横舱壁补板
clod plate for wrong opening on transver bulkhead F.80
挂舵壁对接焊缝
butt welding ams of rudder horn
6110克令吊对接焊缝
butt welding ams of crane in block 6110
机舱备品吊吊梁对接焊缝
butt welding ams of the lifting beam for spare parts in ER
FR49-FR60主机座分段角焊缝
fillet welding ams of ME foundation in block FR49-FR60
6140克令吊箱体角接焊缝
bu搞笑的自动回复
tt welding ams of crane body in block 6140
1113分段外板与铸钢件搭接焊缝
welding ams between shell plate and casting plate of block 1113
杂物吊绞车支架角接焊缝
fillet welding ams of the support for provision crane winch
艏侧推对接焊缝
butt welding ams of bow thruster
6140克令吊底部角接焊缝
fillet welding ams of crane foundation in block 6140
轴向头机座角接焊缝
fillet welding ams for shafting foundation
导流罩角接焊缝
fillet welding ams of fairwater cone
尾轴Propeller shaft 熔深penetration
舱口盖支撑盒
support box for hatch cover
舵机座角接焊缝
fillet welding ams of steering gear foundation
5#重油舱测深管与甲板角接焊缝
fillet welding ams between sounding pipes for HFO Tk 5 and deck
主甲板与外板角接焊缝
fillet welding ams of the main deck and shell plate
中间甲板与外板角接焊缝
fillet welding ams of tween deck and shell plate
抽检50% sampling 50%
吊梁角接焊缝熔深18mm以上
penetration of fillet welding ams for lifting beam > 18mm
GL要求FR107内底板移板对接焊缝
butt welding ams of the shifted plate (GL request)in inner bottom plate on Fr107
舵杆 steer gear
艉轴，中间轴法兰连接螺栓
fitting bolts of the flange between shaft and intermediate shaft
1#重油舱横舱壁板补板
No.1 HFO TK cross bulkhead lug
（返修后） （After Repair）
FR23-FR47 EH01甲板反面轨道梁角接焊缝
fillet welding ams of rail beam on FR23-FR47
前桅杆对接焊缝
butt welding ams of foremast
FR94#主甲板对接焊缝
butt welding ams of main deck on FR94#
F176 LP0区域换板对接焊缝
F176 LPO ar党的女儿观后感
ea in bottom plate butt-welded am
天盛 Tian sheng 正易 Zheng yi
金城 Jin cheng 华扬 Hua yang
大连 DaLian
舵销衬套
Rudder pintle sleeve
尾轴套筒 shaft sleeve 区域 area
3305分段LR船检抽检外板对接焊缝
Spot check of block 3305 for 4 butt weld ams of shell plate
2315分段抽检6只绑扎件对接焊缝
Sample inspection for 6pcs of lashing bridge butt welding ams of block 2315
2315分段绑扎件对接焊缝
lashing bridge butt welding ams of block 2315
2315分段主甲板与外板角焊缝F77-F88,F82-F84
fillet welding ams (F77-F88,F82-F84)between main deck of block 2315 and shell plate
2315/25分段主甲板与内纵壁角焊缝F75-F77,F80-F82,F83-F85
fillet welding ams (F75-F77,F80-F82,F83-F85)between main deck of block 2315/25 and inner longitudinal bulkhead
2315分段支撑盒对接焊缝
butt welding ams for supporting pockets for block 2315
艏侧推螺旋桨附近管子对接焊缝
pipe butt welding ams near the propeller blade of bow thruster
2315/25分段主甲板与舱口围角焊缝F75-F77,F80-F82,F83-F85
fillet welding ams(F75-F77,F80-F82,F83-F85) between hatch coaming and main deck of block 2315/25
butt welding ams and main deck of block 2315/25
舷顶列板 Sheer str难忘的拔河比赛
ake
二甲板Tween deck
外板 shell plate
主甲板 main deck
内底板 inner bottom
纵舱壁 long.bulkhead
舱口围hatch coaming
左舷port
右舷starboard
肋板 ribbed plate
上面内容 Above content
舵叶铸钢件锥面磁粉探伤
Magnetic powder of steel casting of ru檀香手串
dder blade conical surface 。
