Documnet No.
To : Customer
SPECIFICATION FOR
"HANWHA Optically Clear Adhesive (HOCA)"
• General Name : HANWHA Optically Clear Adhesive (HOCA) • Your Part Numbers : • Our Part Numbers : HO-1-050, HO-1-100 • Purchar We received this document on Dept. Name Responsible Person Person in charge , ,日记作业
Business Part
• Manufacturer
This specification covers HOCA intended for using in display module between Hanwha L&C Corporation and Shanghai-leadtech CO.,LTD on
Dept. name Quality Assurance Business Part Manufacturing Section Marketing Department Manager Manager Manager
Electronic Material Division
Documnet No.
Specification For "HANWHA Opically Clear Adhesive"
1. Material Light relea PET film, Acid-free acryl adhesive and heavy relea PET in the form of film 2. Product constitution Product Name
HO-1-050 HO-1-100 Light relea PET film(㎛) P50H(1SM)L2A : 50±2㎛
Adhesive(㎛)
Acid Free Thickness 50±2㎛ Acid Free Thickness 100±3㎛
Heavy relea Product Total PET film(㎛) thickness constitution
P100(1SM)4H : 100±2㎛ 200±4㎛ 250±5㎛
Light relea PET Adhesive Heavy relea PET
彼岸花花语
3. Appearance and Uniformity Material shall be uniform in composition and free from defects which impair functionality and/or appearance of the consumer products as process capability permit 1) Defects - The broken and groove of surface - The bow and air bladder of adhesive layer ※ The position of Defect is flagged by polyester tape at the roll edge The position of the flag is subject to mutual discussion 4. Width, Length and Splices Item Width Standard Length / Roll Maximun number of splices Minimum splice-free length Unit ㎜ m m HO-1-050 HO-1-100
250/500±2.0 100±2.0 3 30
*Required further consultation between Hanwha L&C Corp. and customer.
Electronic Material Division
Documnet No.
谦辞5. Typical Properties and Performance Characteristics Item
Light relea PET
Unit
新年快乐英语歌
Specification
HO-1-050 HO-1-100简述自己的人生观
Test Method/ Condition
50±1 ㎛ 50±2 100±1 >1.70
Kgf/25㎜
50±1 100±3 100±1 >1.70 1.50 >1.70
+100℃/2HR +85℃/85%RH /48HR -40℃/1HR↔ +85℃/1HR, 200 Cycle
Thickness
Adhesive Heavy relea PET
Micro meter
PET
(Peel angle : 180° Peeling speed : 305㎜/min.)
Peel Strength古代婚服
Glass PC
>1.50 >1.70
ASTM D3330
Heat Resistance
Haze Resistance Under Heat and Humid
No change in appearance
-
No change in appearance No change in appearance
Thermal Shock Cycling Test Transmittance Optical Properties Haze Refractive Index UV-light Resistance ITO Deterioration % % %
>98.0 <1.00
>98.0 <1.00
≥300nm ASTM D1003-92
Measured for Sodium D line UVA-340 lamp, 068w/㎡, 500HR
>1.460 No discoloration <20
+85℃/90%RH /960HR
*Required further consultation between Hanwha L&C Corp. and customer.
6. Test Procedures Test procedures are shown in Appendix 1.考研历年国家线
Electronic Material Division
Documnet No.
7. Index of code
HO - 1 - ***
① ② ③ ① Product type : HANWAH optically clear adhesive ② Film type : 1- Non carrier film 3- Carrier film ③ Adhesive thickness : 050 - 50㎛ 100 - 100㎛ 125 - 125㎛ 8. Test Report The test report shall be submitted for each delivered lot ( Appendix 2 ) Test test report of each lot shall include the following : 1) Product Code 2) Lot No. 3) The date of production 4) The date of test 5) Width 6) Length 7) Materials 8) Thickness 9) Peel strength 10) Heat Resistance 11) Haze Resistance Under Heat and Humid 12) Thermal Shock Cycling Test 13) Transmittance 14) Haze 15) Refractive Index 16) UV-light Resistance 17) ITO Deterioration
Electronic Material Division
Documnet No.
8. Packing 1) Packing unit The roll shall be rolled up to 3 inches paper core. The width of paper core is 252mm or 502 mm. 2) The method for packing Each roll shall be packed into one carton so as not to be damaged during transportation and storage. 9. Marking The following items shall be marked on the surface of each carton. ( Appendix 3 ) 1) Product name 2) Product Code 3) Width 4) Description 5) Length 6) Weight 7) Splice number 8) Lot number 9) Manufacturer 10. Storage condition Store ou
执政能力建设r product below 5℃ 11. Addition This specification will come into effect on , ,
Electronic Material Division
