SAFETY DATA SHEET
SeaLion Repul Comp.B
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Emergency telephone
number
Supplier/Manufacturer
::Product u Coatings: Solvent-borne.
:Label No.:12900
Jotun Paints (Europe) Ltd.
Stather Road
Flixborough, Scunthorpe
North Lincolnshire
杭州居住证办理DN15 8RR
England
Tel: +44 17 24 40 00 00
Fax: +44 17 24 40 01 00
SeaLion Repul Comp.B
Product name and/or code :
Contact National Poison Centre via Hospital or Registered Medical Practitioner The product is classif
ied as dangerous according to Directive 1999/45/EC and its amendments.Harmful by inhalation. Irritating to eyes and respiratory system.
Harmful
Substances prenting a health or environmental hazard within the meaning of the Dangerous Substances Directive 67/548/EEC.
Occupational exposure limits, if available, are listed in Section 8.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit
[3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII
[4] Substance meets the criteria for vPvB according to Regulation (EC) No. 1907/2006, Annex XIII
If swallowed, ek medical advice immediately and show the container or label.
Keep person warm and at rest. Do not induce vomiting.Skin contact Check for and remove any contact lens. Immediately flush eyes with running water
for at least 15 minutes, keeping eyelids open. Seek immediate medical attention.
Remove contaminated clothing and shoes. Wash skin thoroughly with soap and
water or u recognid skin cleanr. Do NOT u solvents or thinners.First-aid measures Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by
trained personnel.
Ingestion
Inhalation Eye contact ::::General In all cas of doubt, or when symptoms persist, ek medical attention. Never give
anything by mouth to an unconscious person. If unconscious, place in recovery
position and ek medical advice.
:Recommended: alcohol-resistant foam, CO 2, powders, water spray.
Extinguishing media :Recommendations
:Fire will produce den black smoke. Exposure to decomposition products may
cau a health hazard. Appropriate breathing apparatus may be required.
Cool clod containers expod to fire with water. Do not relea runoff from fire to
drains or watercours.Extinguishing media not to be ud :
Do not u water jet.
Personal precautions
Exclude sources of ignition and ventilate the area. Avoid breathing vapour or mist.Refer to protective measures listed in ctions 7 and 8.::Spill Contain and collect spillage with non-combustible, absorbent sand,
earth, vermiculite or diatomaceous earth and place in container for disposal
according to local regulations (e ction 13). Preferably clean with a detergent.
Avoid using solvents.
Note: e ction 8 for personal protective equipment and ction 13 for waste disposal.
Handling静女朗读
Prevent the creation of flammable or explosive concentrations of vapours in air and
avoid vapour concentrations higher than the occupational exposure limits.
In addition, the product should only be ud in areas from which all naked lights and
other sources of ignition have been excluded. Electrical equipment should be
protected to the appropriate standard.
To dissipate static electricity during transfer, earth drum and connect to receiving
container with bonding strap. Operators should wear antistatic footwear and clothing
and floors should be of the conducting type.
Keep away from heat, sparks and flame. No sparking tools should be ud.
Avoid contact with skin and eyes. Avoid the inhalation of dust, particulates, spray or
mist arising from the application of this preparation. Avoid inhalation of dust from
sanding.
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and procesd.
Put on appropriate personal protective equipment (e Section 8).
Never u pressure to empty. Container is not a pressure vesl.
Always keep in containers made from the same material as the original one.
Comply with the health and safety at work laws.
Information on fire and explosion protection
施工组织课程设计
Vapours are heavier than air and may spread along floors. Vapours may form
explosive mixtures with air.
When operators, whether spraying or not, have to work inside the spray booth,
草莓苗ventilation is unlikely to be sufficient to control particulates and solvent vapour in all
cas. In such circumstances they should wear a compresd air-fed respirator
during the spraying process and until such time as the particulates and solvent
vapour concentration has fallen below the exposure limits.:
Notes on joint storage
Keep away from: oxidising agents, strong alkalis, strong acids.
Additional information on storage conditions
Obrve label precautions. Store in a dry, cool and well-ventilated area. Keep away
from heat and direct sunlight. Keep away from sources of ignition. No smoking.
Prevent unauthorid access. Containers that have been opened must be carefully
realed and kept upright to prevent leakage.
Engineering measures Provide adequate ventilation. Where reasonably practicable, this should be achieved
by the u of local exhaust ventilation and good general extraction. If the are not
sufficient to maintain concentrations of particulates and solvent vapours below the
OEL, suitable respiratory protection must be worn.
Skin and body
Personal protective equipment
中国军衔肩章
If workers are expod to concentrations above the exposure limit, they must u
appropriate, certified respirators. U respiratory mask with charcoal and dust filter
when spraying this product.(as filter combination A2-P2). In confined spaces, u
compresd-air or fresh-air respiratory equipment. When u of roller or brush,
consider u of charcoalfilter.
Personnel should wear antistatic clothing made of natural fibres or of high-temperature-resistant synthetic fibres.U safety eyewear designed to protect against splash of liquids.Eyes
Respiratory system ::::
:For prolonged or repeated handling, u the following type of gloves: gloves:
neoprene or nitrile.
Barrier creams may help to protect the expod areas of the skin but should not be
applied once exposure has occurred.
Hands For right choice of glove materials, with focus on chemical resistance and time of
penetration, ek advice by the supplier of chemical resistant gloves.
The ur must check that the final choice of type of glove lected for handling this
product is the most appropriate and takes into account the particular conditions of
u, as included in the ur's risk asssment.
Physical state Solubility
Liquid.Insoluble in the following materials: cold water and hot water.Characteristic.Odour Clear.Colour Flash point Clod cup: 62°C (143,6°F):
:
:
::
Density :
1.06 g/cm 3Explosion limits :
1.3 - 23%Stable under recommended storage and handling conditions (e ction 7).
Hazardous decomposition products: carbon monoxide, carbon dioxide, smoke, oxides of nitrogen.
Keep away from the following materials to prevent strong exothermic reactions: oxidising agents, strong alkalis, strong acids.
There is no data available on the preparation itlf. The preparation has been assd following the conventional method of the Dangerous Preparations Directive 1999/45/EC and classified for toxicological hazards accordingly. See ctions 2 and 15 for details.
Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result in adver health effects such as mucous membrane and respiratory system irritation and adver effects on the kidneys,liver and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular weakness,drowsiness and, in extreme cas, loss of consciousness.
Solvents may cau some of the above effects by absorption through the skin. Repeated or prolonged contact with the preparation may cau removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption through the skin.
If splashed in the eyes, the liquid may cau irritation and reversible damage.
Ingestion may cau naua, diarrhea and vomiting.
This takes into account, where known, delayed and immediate effects and also chronic effects of components from
short-term and long-term exposure by oral, inhalation and dermal routes of exposure and eye contact.
There is no data available on the preparation itlf.
拉布拉多怎么养
Do not allow to enter drains or watercours.
The preparation has been assd following the conventional method of the Dangerous Preparations Directive
1999/45/EC and is not classified as dangerous for the environment.
Do not allow to enter drains or watercours. Material and/or container must be dispod of as hazardous waste.08 01 11* Waste paint and varnish containing organic solvents or other dangerous
心理健康指导
substances. If this product is mixed with other wastes, this code may no longer apply.If mixed with other wastes, the appropriate code should be assigned. For further
information, contact your local waste authority.
European waste catalogue (EWC)
:Transport within ur’s premis:always transport in clod containers that are upright and cure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
This preparation is not classified as dangerous according to international transport regulations (ADR/RID, IMDG or
ICAO/IATA).
Harmful
Safety phras
S23- Do not breathe vapour / spray.S51- U only in well-ventilated areas.R20- Harmful by inhalation.R36/37- Irritating to eyes and respiratory system.Hazard symbol or symbols Risk phras
EU regulations
:
:::The product is classified and labelled for supply in accordance with the Directive 1999/45/EC as follows:Industrial u :The information contained in this safety data sheet does not constitute the ur’s
own asssment of workplace risks, as required by other health and safety
汽车大全图片
legislation. The provisions of the national health and safety at work regulations apply to the u of this product at work.
R11- Highly flammable.
R10- Flammable.
R20- Harmful by inhalation.
R36/37- Irritating to eyes and respiratory system.:Full text of abbreviated R phras
Full text of abbreviated H
statements :H225Highly flammable liquid and vapour.H226Flammable liquid and vapour.
H319Caus rious eye irritation.
H332Harmful if inhaled.
H335May cau respiratory irritation.
CEPE Classification
:1Date of issue
19.01.2011.Version The information in this SDS is bad on the prent state of our knowledge and on current laws. The product is not to be ud for purpos other than tho specified under ction 1 without first obtaining written handling instructions. It is always the responsibility of the ur to take all necessary steps to fulfil the demands t out in the local rules and legislation. The information in this SDS is meant to be a description of the safety requirements for our product. It is not to be considered a guarantee of the product's properties.Notice to reader
1
:This Safety Data Sheet is prepared in accordance with Annex II to Regulation (EC) No 1907/2006.
:Indicates information that has changed from previously issued version.
