EN1092-1 法兰标准Flanges PN 6 EN 1092-1
Dimensions of PN 6 Flanges EN 1092-1
桂林景点介绍
NOTE 1: Dimensions N1, N2 and N3 are measured at the interction of the hub draft angle and the back face of the flange. NOTE 2: For d1 dimensions e document "Flange facing according to EN 1092-1".
人生只剩归途一二三四歌词Dimensions in mm
* Above DN 600 dimension C1 is to be specified by the purchar.
** For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.
NOTE: The p/t ratings from EN 1092-1 apply only for flange types 05, 11, 12, 13 and 21 having nominal sizes up to and including DN 600. The p/t rating of all other flanges shall be agreed between the manufacturer and the purchar.
爱在蔓延Flanges PN 10 EN 1092-1
学校食堂管理方案Dimensions of PN 10 Flanges EN 1092-1
如何提高写作能力
NOTE 1: Dimensions N1, N2 and N3 are measured at the interction of the hub draft angle and the back face of the flange. NOTE 2: For d1 dimensions e document "Flange facing according to EN 1092-1".武志红的书
共创文明城市
Dimensions in mm
* For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter,