LOYOLA LABORATORY SURVEY FORM
Biosafety Level 2 (BL-2)
Biosafety Level 2 (BL-2) is similar to Biosafety Level 1 and is suitable for work involving agents usually belonging to Risk Group 2 that have moderate potential hazard to personnel and the environment. It differs from BL-1 in that (1) laboratory personnel have specific training in handling pathogenic agents and are directed by competent scientists; (2) access to the laboratory is limited when work is being conducted; (3) extreme precautions are taken with contaminated sharp items; and (4) certain procedures in which infectious aerosols or splashes may be created are conducted in biological safety cabinets or other physical containment equipment.
The following standard and special practices, safety eq uipment, and facilities apply to agents assigned to Biosafety Level 2:
A. Standard Microbiological Practices
1. Access to the laboratory is limited or restricted at the discretion of the
laboratory director when experiments are in progress.
2. Persons wash their hands after they handle viable materials, after
removing gloves, and before leaving the laboratory.
3. Eating, drinking, smoking, handling contact lens, and applying
cosmetics are not permitted in the work areas. Food is stored outside the
work area in cabinets or refrigerators designated for this purpo only.
Keep hands away from mouth, no, eyes, face and hair.
4. Mouth pipetting is prohibited; mechanical pipetting devices are ud.
5. Policies for the safe handling of sharps are instituted.
6. All procedures are performed carefully to minimize the creation of
splashes or aerosols.
7. Work surfaces are decontaminated on completion of work or at the end of
the day and after any spill or splash of viable material with disinfectants
that are effective against the agents of concern.
8. All cultures, stocks, and other regulated wastes are decontaminated
before disposal by an approved decontamination method such as
autoclaving. Materials to be decontaminated outside of the immediate
laboratory are placed in a durable, leakproof container and clod for
transport from the laboratory. Materials to be decontaminated off-site from the facility are packaged in accordance with applicable local, state, and
federal regulations, before removal from the facility.
9. An inct and rodent control program is in effect.
B. Special Practices
1. Access to the laboratory is limited or restricted by the laboratory director
when work with infectious agents is in progress. In general, persons who are at incread risk of acquiring infection, or for whom infection may have rious conquences, are advid against entering the laboratory or
animal rooms. For example, persons who are immunocompromid may be at incread risk of acquiring infections.
琴声何来2. The laboratory director establishes policies and procedures whereby only
persons who have been advid of the potential hazards and meet
specific entry requirements (e.g., immunization) may enter the laboratory.
3. A biohazard sign must be posted on the entrance to the laboratory when
没问题的英语etiologic agents are in u. Appropriate information to be posted includes the agent(s) in u, the biosafety level, the required immunizations, the
investigator's name and telephone number, any personal protective
equipment that must be worn in the laboratory, and any procedures
required for exiting the laboratory.
4. To maintain negative air pressure, laboratory doors are clod when work
is in progress. Airflow should be verified monthly.
5. Laboratory personnel receive appropriate immunizations or tests for the
agents handled or potentially prent in the laboratory (e.g., hepatitis B
vaccine or TB skin testing).
6. When appropriate, considering the agent(s) handled, baline rological
status for laboratory and other at-risk personnel is determined. Additional rologies may be performed periodically, depending on the agents
handled or the function of the facility.
7. Exposures are reported to Security (773) 508-2463 (non-emergency) or
44-911 (emergency).
8. Biosafety procedures are incorporated into standard operating procedures
or in a biosafety manual adopted or prepared specifically for the laboratory by the laboratory director. Personnel are advid of special hazards and
are required to read and follow instructions on practices and procedures.
9. The laboratory director ensures that laboratory and support personnel
receive appropriate training on the potential hazards associated with the
work involved, the necessary precautions to prevent exposures, and the
exposure evaluation procedures. Personnel receive annual updates or additional training as necessary for procedural or policy changes.
10. A high degree of precaution must always be taken with any
contaminated sharp items, including needles and syringes, slides,
pipettes, capillary tubes, and scalpels.
a. Needles and syringes or other sharp instruments should be
restricted in the laboratory for u only when there is no alternative,
such as parenteral injection, phlebotomy, or aspiration of fluids from
laboratory animals and diaphragm bottles. Plasticware should be
substituted for glassware whenever possible.
b. Only needle-locking syringes or disposable syringe-needle units
(i.e., needle is integral to the syringe) are ud for injection or
aspiration of infectious materials. Ud disposable needles must
not be bent, sheared, broken, recapped, removed from disposable
syringes, or otherwi manipulated by hand before disposal; rather,
they must be carefully placed in conveniently located puncture-
作业一
resistant containers ud for sharps disposal. Non-disposable
sharps must be placed in a hard-walled container for transport to a
processing area for decontamination, preferably by autoclaving.
c. Syringes which re-sheathe the needle, needleless systems, and
other safety devices are ud when appropriate.转让群主
d. Broken glassware must not be handled directly by hand, but must
be removed by mechanical means such as a brush and dustpan,
tongs, or forceps. Containers of contaminated needles, sharp
equipment, and broken glass are decontaminated before disposal,
according to any local, state, or federal regulations.
11. Cultures, tissues, specimens of body fluids, or potentially infectious
wastes are placed in a container with a cover that prevents leakage
during collection, handling, processing, storage, transport, or shipping.
12. Laboratory equipment and work surfaces should be decontaminated with
an effective disinfectant on a routine basis, after work with infectious
materials is finished, and especially after overt spills, splashes, or other contamination by infectious materials. Contaminated equipment must be decontaminated according to any local, state, or federal regulations
高尔基母亲before it is nt for repair or maintenance or packaged for transport in
accordance with applicable local, state, or federal regulations, before
removal from the facility. Plea contact BSO (8-3367) with questions.
13. An emergency spill plan is formulated, reviewed by all personnel and
posted in the laboratory. Spills and accidents that result in overt exposures to infectious materials ar
e immediately reported to the laboratory director, BSO (8-3367), and Public Safety (44-911). Medical evaluation,
surveillance, and treatment are provided as appropriate and written
records are maintained.
14. Animals not involved in the work being performed are not permitted in
the lab.
15. Gas cylinders are curely fastened.
C. Safety Equipment (Primary Barriers)
1. Properly maintained biological safety cabinets, preferably Class II, or
other appropriate personal protective equipment or physical containment devices are ud whenever:
a. Procedures with a potential for creating infectious aerosols or
splashes are conducted. The may include centrifuging, grinding,
blending, vigorous shaking or mixing, sonic disruption, opening
containers of infectious materials who internal pressures may be
different from ambient pressures, inoculating animals intranasally,
and harvesting infected tissues from animals or embryonate eggs.
b. High concentrations or large volumes of infectious agents are ud.
Such materials may be centrifuged in the open laboratory if aled
rotor heads or centrifuge safety cups are ud, and if the rotors
or safety cups are opened only in a biological safety cabinet.
2. Biosafety cabinet gauges are read daily and airflow is checked. Personnel
are instructed in proper u of the BSC, and appropriate start-up and shut-down procedures are followed.
3. Protective eyewear should be worn in the laboratory when chemicals are
prent. Additional face protection (goggles, mask, face shield or other
splatter guard) is ud for anticipated splashes or sprays of infectious or
other hazardous materials to the face when the microorganisms must be
manipulated outside the BSC. Persons who wear contact lens in
laboratories should also wear goggles or a face shield.
4. Protective laboratory coats, gowns, smocks, or uniforms designated for l
我为祖国喝彩
ab u are worn while in the laboratory. This protective clothing is
removed and left in the laboratory before leaving for non-laboratory areas
(e.g., cafeteria, library, administrative offices). All protective clothing is
either discarded in the laboratory or laundered by the institution; it should
never be taken home by personnel.
5. Gloves are worn when hands may contact potentially infectious materials,
contaminated surfaces or equipment. Wearing two pairs of gloves may be appropriate. Gloves are dispod of when overtly contaminated, and r
emoved when work with infectious materials is completed or when the
integrity of the glove is compromid. Disposable gloves are not washed,
reud, or ud for touching "clean" surfaces (keyboards, telephones,
etc.), and they should not be worn outside the lab. Alternatives to
powdered latex gloves should be available. Hands are washed following
removal of gloves.
6. Fume hood airflow is checked before u. Sash is lowered when work is
In progress. Traffic in front of hood is restricted when work is in progress.
D. Laboratory Facilities (Secondary Barriers)
1. Provide lockable doors for facilities that hou restricted "lect agents"
(as defined in 42 CFR 72.6). Contact IBC/BSO (8-3367) for registration
required to receive or nd lect agents.
2. Consider locating new laboratories away from public areas.
3. Each laboratory contains a sink for handwashing.
4. The laboratory is designed so that it can be easily cleaned. Carpets and
rugs in laboratories are inappropriate.
5. Bench tops are impervious to water and are resistant to moderate heat
and the organic solvents, acids, alkalis, and chemicals ud to
decontaminate the work surfaces and equipment.
通讯录同步6. Laboratory furniture is capable of supporting anticipated loading and us.
Spaces between benches, cabinets, and equipment are accessible for
奔腾g2020cleaning. Chairs and other furniture ud in laboratory work should be
covered with a non-fabric material that can be easily decontaminated.
7. Install biological safety cabinets in such a manner that fluctuations of the
room supply and exhaust air do not cau the biological safety cabinets to operate outside their parameters for containment. Locate biological safety cabinets away from doors, from windows that can be opened, from heavily traveled laboratory areas, and from other potentially disruptive equipment so as to maintain the biological safety cabinets' air flow parameters for
containment.
8. An eyewash station is readily available.
9. Illumination is adequate for all activities, avoiding reflections and glare that
could impede vision.
10. Ventilation system provides an i nward flow of air without recirculation to
spaces outside of the laboratory. If the laboratory has windows that open
