Keysight E3631A
Triple Output
DC Power Supply
是德科技E3631A
三重输出
直流电源
叶绿体结构Ur’s Guide
用户指导喜酒
The Keysight E3631A is a high performance 80 watt-triple output DC power
supply with GPIB and RS-232 interfaces. The combination of bench-top and system
features in this power supply provides versatile solutions for your design and test
requirements.
Convenient bench-top features
上海万科双语学校• Triple output
• Easy-to-u knob control for voltage and current ttings
• Highly visible vacuum-fluorescent display for voltage and current meters
黄山景点介绍• Tracking operation for ±25V outputs
• Excellent load and line regulation and low ripple and noi
• Operating states storage
• Portable ruggedized ca with non-skid feet
Flexible system features
• GPIB (IEEE-488) and RS-232 interfaces are standard
• SCPI (Standard Commands for Programmable Instruments) compatibility
• I/O tup easily done from front-panel
生活谚语
Keysight E3631A是一款高性能80瓦三输出直流电源
提供GPIB和RS-232接口。 台式和系统的组合
该电源的功能为您的设计和测试提供了多种解决方案
要求。
方便的台式功能
•三倍输出
•易于使用的旋钮控制，用于电压和电流设置
•高度可见的真空荧光显示屏，用于电压和电流表
•±25V输出的跟踪操作
•出色的负载和线路调节以及低纹波和低噪声
•运行状态存储
•便携，坚固的外壳，防滑脚
灵活的系统功能
•GPIB（IEEE-488）和RS-232接口是标准配置
•SCPI（可编程仪器的标准命令）兼容性
•从前面板轻松完成I / O设置
∙ 1仪表并调整选择键
2跟踪启用/禁用键
3显示限制键
4调用操作状态键
5存储运行状态/本地密钥
6错误/校准键
7 I / O配置/安全密钥
8输出开/关键
9控制旋钮
10分辨率选择键
11电压/电流调节选择键
∙ 1 Meter and adjust lection keys
2 Tracking enable/disable key
3 Display limit key
4 Recall operating state key
5 Store operating state/Local key
6 Error/Calibrate key
7 I/O Configuration / Secure key
8 Output On/Off key
9 Control knob
10 Resolution lection keys
11 Voltage/current adjust lection key
∙ 1 Meter and adjust lection keys Select the output voltage and current of any one
supply (+6V +25V or -25V output) to be monitored on the display and allow knob
adjustment of that supply.
2 Tracking enable / disable key Enables / disables the track mode of ±25V supplies.
3 Display limit key Shows the voltage and current limit values on the display and
allows knob adjustment for tting limit values.
4 Recall operating state key Recalls a previously stored operating state from
location “1” “2” or “3”.
5 Store operating state / Local key1 Stores an operating state in location “1” “2”
or “3” / or returns the power supply to local mode from remote interface mode.
6 Error / Calibrate key2 Displays error codes generated during operations lf-test
and calibration / or enables calibration mode (the power supply must be uncured
before performing calibration).
7 I/O Configuration / Secure key3 Configures the power supply for remote
interfaces / or cure and uncure the power supply for calibration.
8 Output On/Off key Enables or disables all three power supply outputs. This key
toggles between two states.
9 Control knob Increas or decreas the value of the blxxxxinking digit by turning
clockwi or counter clockwi.
10 Resolution lection keys Move the flashing digit to the right or left.
11 Voltage/current adjust lection key Selects the knob function to voltage control or
current control.
∙ 1仪表和调整选择键选择任何一个的输出电压和电流
在显示屏上监视电源（+ 6V，+ 25V或-25V输出）并允许旋钮
调整供应量。
2跟踪启用/禁用键启用/禁用±25V电源的跟踪模式。
3显示屏限位键显示屏幕上的电压和电流限值
允许旋钮调整设置限制值。
4调用操作状态键从中调用先前存储的操作状态
位置“1”，“2”或“3”。
5存储运行状态/本地密钥1
在“1”，“2”位置存储运行状态，
或“3”/或从远程接口模式将电源返回到本地模式。
6错误/校准键2显示操作期间生成的错误代码，自检
和校准/或启用校准模式（电源必须是不安全的
在执行校准之前）。
7 I / O配置/安全密钥3配置远程电源
接口/或安全和不安全的电源进行校准。
8输出开/关键启用或禁用所有三个电源输出。这把钥匙
美国运动鞋品牌
在两个州之间切换。
9控制旋钮通过旋转增加或减少闪烁数字的值
顺时针或逆时针。
10分辨率选择键向右或向左移动闪烁的数字。
11电压/电流调节选择键选择旋钮功能到电压控制或
电流控制。
1当电源在遥控器中时，该键可用作“本地”键界面模式。
2您可以通过按住此键启用“校准模式”打开电源。
3当电源供电时，您可以将其用作“安全”或“不安全”键在校准模式下
1 The key can be ud as the “Local” key when the power supply is in the remote interface mode.
2 You can enable the “calibration mode” by holding down this key when you turn on the power supply.
3 You can u it as the “Secure” or “Uncure” key when the power supply is in the calibration mode
郁金香壁纸
>许银川棋谱
