Part 1 GENERAL INFORMATION 1.1 Scope of this leaflet
This leaflet refers to the
河北有什么好玩的旅游景点SRF3 Three Speed Hub Gear, associated controls, cables and markings on the hub shell.
1.2 Lubrication
No routine lubrication is However, during
the hub greas should be
following
Sturmey-Archer Technical
Should be ud:
For Bearing - SA103B
Plea contact Sturmey-Archer information on the availability of greas.
1.3 Gear Change
Gear change is simple and smooth with the proven Sturmey - Archer indexed control system. Continue Pedaling, but ea pressure on the pedals, and lect the
gear required. If stationary, simply lect gear required.
1.4 Gear Ratios
The AW hub has three gears:
1st gear - Decrea of 25%
2nd gear - Direct drive
3rd gear - Increa of 33 1/3%
1.5 Sprockets
The overall drive ratio can be altered by changing the size of the sprocket. A range of sprockets from 13 to 22 teeth is available, suitable for 1/2" X 1/8" Chain. Part 2 ROUTINE MAINTENANCE When rvice problems ari they usually occur outside the hub, and the following checks must be made before removing the wheel from the bicycle:
2.1 Gear Adjustment
1. Ensure that no more
2.5mm of axle
protrudes from the axle nut.
2. Select 2nd gear and rotate the pedal
crank to ensure the gear is engaged.
Turn the Cable Adjuster (a) until the
center of the end of the Indicator Rod
is level with the end of the Axle, as
show in diagram.
3. Tighten the Cable-Adjusting Nut (b)
and Indicator Locknut (c) to locate
the gear changing system.
pedal crank, change back to 2nd gear
and check adjustment. Retry the
stages description above when the
gear changing is not correct.
▲W ARNING: The hub must not be
ridden out of adjustment as this may
damage the internal parts and cau the
hub to malfunction.
2.2 Hub Bearing Adjustment
If for any reason the bearing adjustment is
altered, the cones must be ret correctly
before using the hub. The right-hand cone
is pre-t at the factory and should only be
disturbed at major rvice intervals. The
left - hand cone is ud to adjust the
bearings in the hub.
Left Hand Cone:
1. Loon the Cone Locknut.
2. Adjust the Left Hand Cone until very
拔的四字词语
slight side play can be felt at the wheel
rim, and none at the hub.
3. Tighten the Cone Locknut.
Right Hand Cone:
1. Loon the Left Hand Cone Locknut
and Cone.
2. Loon the Right Hand Cone Locknut.
3. Screw down the Right Hand Cone
finger tight.
4. Unscrew the Right Hand Cone by half
a turn.
5. Tighten the Right Hand Cone Locknut.
6. Tighten the Left Hand Cone Locknut
and adjust as above.
Part 3 ASSEMBLY/DISASSEMBLY
INSTRUCTIONS
When rvice problems occur which
cannot be corrected by attention to
external maintenance, a clo inspection
of the working parts inside the hub will be
necessary.
Nuts
ends
the
and
the
3. Unscrew the Left Hand Cone Locknut,
Spacing Washer and Cone.
Fig.2
1. Loon the Right Hand Ball Ring with
2. Unscrew the Ball Ring to relea the
护理工作计划
Internal Asmbly from the Hub Shell.
Fig.3
1. Clamp the left hand end of the Axle in
a vice.
2. Remove the Right Hand Cone Locknut,
Fig.4
1. Lift off the Driver, Ball Cage, Ball
Ring, Gear Ring, Clutch and Axle Key.
2. Remove the Gear Ring Pawls, Pawl
电气基础知识
Pins and Springs.
Item No. Sales No. Description
火龙果幼苗Item
法兰克福国际机场
No.
Sales No. Description
Item
No.
Sales No. Description
1 HSA 10
2 Outer Dust Cap HSL 836 Sprocket 19T(Chrome) 37 HMN 128 Axle Nut R.H.
2 HSA 284 Ball Cage Asmbly L.H. 6.4mm Ball HSL 834 Sprocket 20T(Chrome) 38 HSA 488 Gear Selector Guide Asmbly
3 HSA 599 Hub shell Asmbly 28 Holes HSL 832 Sprocket 21T(Chrome) 39 HMN 129 R.H. Axle Nut
HSA 600 Hub shell Asmbly 36 Holes HSL 830 Sprocket 22T(Chrome) 40 HSL 711 Indicator Guard
4 HSA 583 Planet Cage Assy (includes 2 off 21 HSL 721 Sprocket Circlip 41 HSA 507 Gear Selector Guide Cover
Items 5, 1 off Item 6) 22 HMN 128 Axle Nut L.H. 41B HSA620 Gear Selector Guide Full Cover
5 HSA 573 Pawl for Planet Cage HMN 388 Dome Nut New - SA logo 42 HSJ 907 TSS32 Shifter W/2000mm Cable
6 HSA 435 Circlip 23 HMW 518 Lockwasher 4.0t - 9.5mm Slot 43 HSJ 92
7 TSS31 Shifter W/2000mm Cable
7 HSA 292 Planet Pinion HMW515 Lockwahr 1.8t - 9.5mm Slot 44 HSJ 865 Orion Control
8 HSA 436 Pinion Pin 23B HMW494 Serrated Lockwasher – 9.5mm Slot 45 HSJ 823 Nimbus Control 22.2mm Clip
9 HSA 443 Gear Ring Asmbly (includes 2 24 HMN 405 Cone Locknut 46 HSJ 762 Trigger Control 22.2mm Clip
Off Items 10, 11 and 12) 25 HMW 146 Spacing Washer 1.6mm 47 HSL 759 Cable Anchorage
10 HSA 119 Pawl for Gear Ring HMW 129 Spacing Washer 3.2mm 48 HSJ 553 Chainstay Fulcrum Clip φ15.9mm
11 HSA 120 Pawl Spring HMW 483 Spacing Washer 4.8mm HSJ 548 Chainstay Fulcrum Clip φ17.9mm
12 HSA 415 Pawl Pin HMW 484 Spacing Washer 6.4mm HSJ 753 Chainstay Fulcrum Clip φ19.1mm
13 HSA 584 Ball Ring 26 HSA 101 Cone L.H. with Dust Cap 49 HSJ 101 Trigger Cable with Anchorage
14 HSA 438 Ball Cage Asmbly 27 HSA 440 Axle - 163mm with Sun Pinion 550 x 1550mm Black
15 HSA 439 Driver Asmbly Complete HSA 621 Axle - 148mm with Sun Pinion HSJ 102 Trigger Cable with Anchorage
(includes 1 off Items 16 and 17) 28 HSA 295 Axle Key 1450 x 1600mm Black
16 HSA 284 Ball Cage Asmbly R.H. 6.4mm Ball 29 HSA 536 Clutch 50 HSJ 802 Nimbus Cable with Anchorage
17 HSA 102 Outer Dust Cap 30 HSA 128 Clutch Spring 1400 x 1550mm Black垃圾桶的英文
18 HSL 701 Sprocket Dustcap 31 HSA 129 Clutch Spring Cap 51 HSJ 882 Twistgrip Cable with Anchorage 18B HSL 871 Plastic Sprocket Dustcap 32 HSA 315 Gear Indicator (3 Mark, 163mm Axle) 1450 x 1600mm Black
19 HMW 127 Sprocket Spacing Washer 1.6mm HSA 126 Gear Indicator (2 Mark, 148mm Axle) 52 HSJ 883 Orion Cable with Anchorage
20 HSL 854 Sprocket 13T(Chrome) 33 HSA 101 Cone R.H. with Dust Cap 1450 x 1600mm Black
HSL 852 Sprocket 14T(Chrome) 34 HMN 405 Cone Locknut 53 HSX 143 AW Internal Replacement Unit HSL 850 Sprocket 15T(Chrome) 35 HMW 518 Lockwasher 4.0t - 9.5mm Slot 163mm Axle
HSL 848 Sprocket 16T(Chrome) HMW515 Lockwahr 1.8t - 9.5mm Slot HSX 144 AW Internal Replacement Unit HSL 846 Sprocket 17T(Chrome) 35B HMW494 Serrated Lockwasher – 9.5mm Slot 148mm Axle
HSL 844 Sprocket 18T(Chrome) 36 HSJ 905 Axle Fulcrum Lever Asmbly
Sun Race Sturmey-Archer Inc.
No.51. Hai-Shan-Jung St., Hai-Hu Village,
Lu-Ju City, Taoyuan County 338, Taiwan
Tel: +886(3)354-4979, Fax: +886(3)354-2858
http: // ;
E-mail:
Sun Race Sturmey-Archer Europe
Keienbergweg 79, 1101 GE Amsterdam Z.O., The Netherlands
Tel: +31(0)20-60 90 221. Fax: +31(0)20-60 90 211
http: // ;
E-mail: info@sunrace.nl响声的英文
Sun Race Sturmey-Archer USA
3212 Jefferson Street #409 Napa, CA 94558-3436 USA
Tel: +1(707)259-6700, Fax: +1(707)259-6710
http: // ;
E-mail:
