汉桓侯祠
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra TM
not connected to the unit and the environment in which you are working on is protected from
Electro-Static Discharge(ESD).
A1 Series
BATTERY PACK REMOVAL
1. Turn the computer upside down as shown.
钢琴音乐2. Slide the battery relea lever in the direction of the arrow.
3. Lift out the battery pack assy .
HDD REMOVAL
1. Turn the computer upside down.
2. Remove two M2.5x16 black flat head screws curing HDD slot cover and pull out the cover ..
4. Separate the battery pack from the battery cover.
OPTIONAL PC CARD REMOVAL 1. Press the eject button of the PC Card you want to remove.
2. Press the extended eject button to pop the PC card out slightly.
3. Grasp the PC Card and pull it out
NOTE
:
Before removing any PCMCIA device, make sure it is “STOPPED” in the PC Card Manager.
Battery pack
Battery cover A1 Series
6. Remove four M3x4 brass flat head screws curing the HDD bracket to the drive.
4. Slowly spread out the memory clips and pull the memory module out of the connector on a 45 degree angle.
3. Remove one M2.5x5 black flat head screw curing the HDD asmbly.
4. Grasp the HDD bracket handle and pull to disconnect the HDD asmbly.
5. Lift the HDD asmbly out of the HDD bay.
耳朵长痣代表什么MEMORY MODULE REMOV
AL
大连胜利广场
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screw
curing the memory cover.3. Lift out the
蔬菜干
cover .
M2.5x5 black flat head screw
HDD assy
HDD bracket handle
M3x4 brass flat head screws
M2.5x4 black flat head screw
Memory module
Memory clips
A1 Series
WIRELESS LAN CARD REMOVAL
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screw curing the Mini PCI slot cover.
3. Lift out the PCI slot cover .
4. Peel off the glass tape curing the mini coax cables.
5. Disconnect the white mini coax cable from main connector and the black mini coax cable from aux connector.
6. Gently press out the Mini PCI slot clips and pull the Mini PCI card out of the connector on a 30 degree angle.
MODEM BOARD REMOVAL
1. Remove one M
2.5x4 black flat head screw curing the modem slot cover.
2. Inrt your finger nail or the ca parator into the notched side of the cover and lift up to relea the latch curing the modem slot cover.
3. Remove two M2x4 black screws curing the modem board.
海蜇的做法4. Gently lift up the modem board to disconnect it from
the system board and disconnect the MJ harness
from JP1 on the modem board.
Mini PCI card
市特殊教育学校
PCI clips
White mini coax cable
手指头脱皮怎么办Black mini coax cable
Modem slot cover M2.5x4 black flat head screws Modem
MJ Harness M1 Series
