情人节送什么礼物好呢300-MS and 320-MS
Quadrupole Mass Spectrometer
Hardware Operation Manual
Legal and Regulatory Notices
Copyright © 2010 Bruker
All other trademarks are the sole property of their respective owners.
All Rights Rerved
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
Warranty
The information contained in this document is subject to change without notice. Bruker makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpo. Bruker is not liable for errors contained herein or for incidental or conquential damages in connection with the furnishing, performance or u of this material. Bruker assumes no responsibility for the u or reliability of its software on equipment that is not furnished by Bruker.
U of Trademarks
The names of actual companies and products mentioned herein may be the trademarks of their respective owners.
Safety Information租房合同范文
Operating Instructions
U this manual to establish conditions for safe and efficient instrument operation. Special considerations and precautions are also included as NOTES , CAUTIONS , and WARNINGS . You must operate the instrument as specified by this manual and any additional information Bruker provides. Address questions about the safe and proper u of the instrument to your local Bruker office.
The safety information prented is for the MS, refer to the manuals of the GC or autosampler to ensure their safe and efficient operation.古堰画乡景区介绍
NOTE
U this information to obtain optimal performance from your instrument.
CAUTION
Alerts you to situations that may cau moderate injury or instrument damage, and provides methods to avoid the situations.
WARNING
Alerts you to potentially hazardous situations that could result in rious injury, and provides
methods to avoid the situations
Warning Description
WARNING: SHOCK HAZARD
Hazardous voltages are prent inside instrument. Disconnect from main power before removing screw-attached panels.
WARNING: CHEMICAL HAZARD Hazardous chemicals may be prent. Avoid contact, especially when replenishing rervoirs. U proper eye and skin protection.
WARINING: BURN HAZARD Very hot or cryogenically cold surfaces may be expod. U proper skin protection.
WARNING: EYE HAZARD Eye damage could occur from flying particles, chemicals, or UV radiation. U proper eye and face protection. WARNING: FIRE HAZARD The potential for fire may be prent. Follow manual instructions for safe operation.
WARNING: EXPLOSION HAZARD The potential for explosion may exist becau of type of gas or liquid ud.
虾怎么保存才新鲜
WARNING: RADIATION SOURCE Ionizing radiation source is prent. Follow manual
instructions for safe operation. WARNING: MOVING PARTS
Keep hands and fingers away.
General Safety Precautions
学科评估排名Follow the safety practices to ensure safe instrument operation.
•Perform periodic leak checks on all supply lines and pneumatic plumbing.
•Do not let gas lines become kinked or punctured. Place lines away from foot traffic and extreme heat or cold.
•Store organic solvents in fireproof, vented, and clearly labeled cabinets so they are easily identified as toxic and/or flammable materials.
•Do not accumulate waste solvents. Dispo of such materials through a regulated disposal program and not through municipal wage lines.
The following is a Federal Communications Commission advisory: This instrument has been tested and found to comply with the limits of a Class A computing device, pursuant to part 15 of the FCC Rules. The limits are designed to provide reasonable protection against harmful interference when the instrument is operated in a commercial environment. This instrument generates, us, and can radiate radio frequency energy and, if not installed and ud in accordance with the instruction manual, may cau harmful interference to radio communications. Operation of this instrument in a residential area is likely to cau harmful interference in which ca the ur will be required to correct the interference at his own expen.
NOTICE:This instrument has been tested per applicable requirements of EMC Directive as
required to carry the European Union CE Mark. As such, this instrument may be
不念过去不畏将来susceptible to radiation/interference levels or frequencies not within the tested
limits.
WARNING This instrument is designed for MS analysis of appropriately prepared samples. It must be operated using appropriate gas and/or solvents and within specified ranges for pressure, flows, and temperatures as described in this manual. The protection provided by the instrument may be impaired if the instrument is not ud as specified by Bruker.
WARNING It is the responsibility of the Customer to inform Bruker if the instrument has been ud for the analysis of hazardous biological, radioactive, or toxic samples, prior to any instrument rvice being performed or when an instrument is being returned to Bruker.
Electrical Hazards •Disconnect the instrument from all power sources before removing protective panels to avoid exposure to dangerous voltages.
•When it is necessary to u a non-original power cord plug, the replacement cord must adhere to the color coding and polarity described in the manual and all local building safety codes. •Replaceme
nt fus must have the size and rating stipulated on the fu panel or in the manual.
•Replace faulty or frayed power cords immediately with the same type and rating. •Voltage sources and line voltage must match the value for which the instrument is wired. Compresd Gas Cylinders •Store and handle compresd gas in strict adherence to safety codes.
•Secure cylinders to an immovable structure or wall.
•Store and move cylinders in an upright, vertical position. Before transport, remove regulators and install the cylinder cap.
•Store cylinders in a well-ventilated area away from heat, direct sunshine, freezing temperatures, and ignition sources.
•Mark cylinders clearly, so they are easily identified •U only approved regulators and connections. •U only connector tubing that is chromatographically clean ( Bruker part number 391832600) and has a pressure rating greater than the highest outlet pressure from the regulator.
General MS Safety Practices
Shock Hazard
Many internal parts carry dangerous voltages. Even if the power switch is off potentially dangerous voltages can exist. The covers shield the operator. Unless specifically instructed, do not remove a cover.
Electrostatic Discharge
Do not touch printed circuit boards unless instructed. Wear a grounded wrist strap to prevent electrostatic discharge to the board, which may damage the board.
Burn Hazard
Heated parts of the mass spectrometers remain hot or cold for a long time after the instrument power is turned off. To prevent painful burns, ensure that all heated or cooled areas have returned to room temperature or wear adequate hand protection before you touch potentially hot surfaces.
Fire Hazard
煤气灶十大品牌
Combustible materials put under, over, or around the foreline pump are fire hazards. Keep the foreline oil pan clean, but do not leave absorbent materials such as paper towels or rags in it.
Spare Parts
Bruker provides operational spare parts for any instrument and major accessory for a period of ven (7) years after shipment of the final production run of that instrument. Spare parts will be available after this ven (7) year period but on an as available basis. Operational spare parts are defined as tho individual electrical or mechanical parts that are susceptible to failure during their normal operation. Examples include relays, lamps, temperature probes, detector elements, motors, etc. Sheet metal parts, structural members or asmblies and castings, printed circuit boards, and functional modules are normally capable of being rebuilt to like-new condition throughout their uful life and therefore will be supplied only on an as available basis after the final production run of the instrument.
Service
Bruker provides rvice support to customers after warranty expiration. Repair rvice can be provided by rvice contracts or on a time and material basis. Technical support and training can be provided by qualified personnel on both a contractual or as-needed basis.
鹿角胶的作用与功效To contact Sales or Service, and to order Parts and Supplies, contact your local Bruker office.
