检验项目 | 测试参考 GSM 11.10-1 ETS 300 607-1 | 测试结果 符合与否 (Yes/No) | 备注 | |
Transmitter 发射机 | ||||
Intermodulation attenuation 互调衰减 | 13.5 | |||
Receiver 接收机 | ||||
Bad frame indication 劣讯框指示 | 14.1 | |||
Reference nsitivity 参考灵敏度 | 14.2 | |||
Usable receiver input level range 可用接收机输入位准范围 | 14.3 | |||
Co-channel rejection 同频道排斥 | 14.4 | |||
Adjacent channel rejection 邻频道排斥 | 14.5 | |||
Intermodulation rejection 互调排斥 | 14.6 | |||
Blocking and spurious respon 阻塞及混附波响应 | 14.7 | |||
AM suppression AM抑制 | 14.8 | |||
Paging performance at high input levels 高输入位准呼叫效能 | 14.9 | |||
Other tests of the layer 1 第1层之其它测试 | |||
Timing advance and absolute delay 时间超前及绝对延迟 | 15 | ||
Reception time tracking speed 接收时间追踪速率 | 16 | ||
Access times during handover 交递间之撷取时间 | 17 | ||
Temporary reception gaps 瞬时接收间隙 | 18 | ||
Channel relea after unrecoverable errors 无法恢复失误后之频道释出 | 19 | ||
Cell lection and relection 细胞选取及重选 | 20 | ||
Received signal measurements 接收信号量测 | 21 | ||
Transmit power control timing and confirmation 发射功率控制定时及确认 | 22 | ||
Single frequency reference 单频参考 | 23 | 内敛的反义词 | |
Tests of the layer 2 第2层测试 | |||
Initialization 初始化 | |||
Normal Initialization 标称初始化 | 25.2.1.1.1 | ||
Loss of UA frame 凯旋什么意思UA讯框损失 | 25.2.1.1.2.1 | ||
UA frame with different information field 不同讯息领域之UA讯框 | 25.2.1.1.2.2 | ||
Information frame and supervisory frames in respon to an SABM frame 响应SABM讯框之信息讯框及监视讯框 | 25.2.1.1.2.3 | ||
Initialization denial 初始化之拒绝 | 25.2.1.1.3 | ||
Total initialization failure 全部初始化之失败 | 25.2.1.1.4 | ||
Normal initialization without contention resolution 标称初始化不含争议部份 | 25.2.1.2 | ||
Initialization failure 初始化失败 | 25.2.1.2.2 | ||
Normal information transfer 标称讯息移转 | |||
Sequence counting and 1 frame acknowledges 连续计次及讯框1之接受 | 25.2.2.1 | ||
Receipt of an 1 frame in the timer recovery state 在定时器恢复状态下讯框1的接收 | 25.2.2.2 | ||
Segmentation and concatenation 区隔与连结 | 25.2.2.3 | ||
Normal layer 2 disconnection 标称第2层断讯 | 25.2.3 | ||
Test of link failure 联机失败测试 | |||
1 frame loss (MS to SS) 讯框1的遗失(MS至SS) | 25.2.4.1 | ||
RR respon frame loss (MS to SS) RR响应讯框的遗失(MS至SS) | 25.2.4.3 | ||
Test of frame transmission with incorrect C/R values 不正确C/R值讯框传输测试 | |||
风是怎么来的1 frame with C bit t to zero 讯框1含C位设定为零 | 25.2.5.1 | ||
SABM frame with C bit t to zero SABM讯框含C位设定为零 | 25.2.5.2 | ||
Test of errors in the control field 在控制范围内之失误测试 | 锅巴的做法|||
N(S) quence error N(S)连续失误 | 25.2.6.1 | ||
N(R)quence error N(R)连续失误 | 25.2.6.2 | ||
Improper F bit 不适当F位 | 25.2.6.3时间的脚步 | ||
Test on receipt of Invalid frames 失效讯框接收之测试 | 25.2.7 | ||
Tests of the layer 3 第3层测试 | |||
Initial Tests 初始测试 | |||
Channel request / initial time 频道请求/初始时间 | 26.2.1.1 | ||
Channel request / repetition time 频道请求/重复时间 | 怎样才能赚到钱26.2.1.2.1 | ||
Channel request / random reference 频道请求/随机参考 | 26.2.1.3 | ||
IMSI detach and IMSI attach IMSI不附加及附加 | 26.2.2鸡腿 | ||
Sequenced MM / CM message transfer 连续MM/CM讯息移转 | 26.2.3 | ||
Establishment cau 建立原因 | 26.2.4 | ||
Test of MS functions in idle mode MS功能在空闲模式之测试 | |||
MS indication of available PLMNs 有效之PLMNs之MS指示 | 26.3.2 | ||
MS will nd only if BSS is “on air” MS将发送仅于BSS是〝正播送中〞 | 26.3.3 | ||
Manual mode of PLMN lection PLMN选取之手动模式 | 26.3.4 | ||
Handling of unknown, unforeen, and erroneous protocol data, and of parallel transactions 未知、未见、失误信令数据及平行交易之处理 | |||
TI and skip indicator / RR / Idle Mode TI及跳过省略指示/RR/空闲模式 | 26.5.2.1.1 | ||
TI and skip indicator / RR / RR-Connection established TI及跳过省略指示/RR/RR-连结建立 | 雄性符号26.5.2.1.2 | ||
TI and skip indicator / MM TI及跳过省略指示/MM | 26.5.2.2 | ||
TI and skip indicator / CC TI及跳过省略指示/CC | 26.5.2.3 | ||
Undefined or unexpected message type / undefined message type / CC 未定义或不期望讯息型式/未定义讯息型式/CC | 26.5.3.1 | ||
Undefined or unexpected message type / undefined message type / MM 未定义或不期望讯息型式/未定义讯息型式/MM | 26.5.3.2 | ||
Undefined or unexpected message type / undefined message type / RR 未定义或不期望讯息型式/未定义讯息型式/RR | 26.5.3.3 | ||
本文发布于:2023-07-24 05:29:39，感谢您对本站的认可！
本文链接：https://www.wtabcd.cn/fanwen/fan/89/1094261.html
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系，我们将在24小时内删除。
| 留言与评论（共有 0 条评论） |
