亚马逊招聘
ID6 - Series: HB
Ho Type 6/2WHT®
High Temperature
62WHT458Applications Oil and Gas:
Methanol rvice (oil rigs, distribution panels, umbilicals), jumper/ suba well control, chemical injection, control of suba hydraulic components, nitrogen rvice, Gaous media handling
Technical Information Polyvinylidenfluoride (PVDF)
Inner Core:
精彩英语学生自我小结2 open layers, 2 den layers of high-tensile steel wire Pressure Support:Polyvinylidenfluoride (PVDF)
Outer Cover:Light grey
Color:
-20°C to +150°C [-4°F to 300°F]
Temperature:
Inrt
ID6 - Series: HB
楤木芽Ho Type 6/2WHT®
High Temperature
62WHT458Swivel nut
Ho curing grip
In ca of accidental leakage when transferring hot medium through SPIR STAR hos the potential for injury exists from escaping fluids at high temperature (up to 150 C or 300F) while under pressure. When ud for this purpo SPIR STAR HT ries hos should only be ud when there is appropriate protecting devices in place to rule out the possibility of injury. The protecting devices may be removed only (e.g. for repairs) after the ho asmbly has been depressurized and cooled to ambient temperature.
李白是哪里人Production related variations of the burst pressure of up to 5 % are possible. Other colors upon request.Maximum test pressure 1035 bar/15000 psi.
The safety factors between the burst pressure and the working pressure as well as the test pressure depend on the operating conditions. For gaous media the outer cover is to be pinpricked. Regarding the safety factor for gaous media plea contact your local SPIR STAR® asmbling center.
The indicated working pressure refers to the ho only. Depending on the ud fitting the permitted working pressure of a ho asmbly may be less.We rerve our rights for technical changes without notice. Subject to printing errors.
ID5 - Series: E
Ho Type 5/6
张滔56001
Applications Waterblast:
Heat exchanger tube cleaning, surface preparation (concrete removal, surface cleaning of buildings,
paint removal), tank and vesl cleaning, ultra high-pressure waterjet cutting and hydro demolition (cutting and demolition of armoured concrete, pipelines, paper or steel)
Hydraulics:
Bolt tensioning, pressure test equipment (valves, tooling and control panels), hydraulic tools (instrumentation packages for gauges, control of rvice equipment, hydraulic jacks, hydraulic tools)
Technical Information Polyoxymethylene (POM)
Inner Core:
6 layers of high-tensile steel wire Pressure Support:Polyamide (PA)
Outer Cover:Blue
Color:正手引体向上
-30°C to +70°C [-22°F to 158°F]
Temperature:
Inrt
ID5 - Series: E
Swivel nut
班主任节Ho protection
Bend restrictor
ID5 - Series: E
Accessories combinations Production related variations of the burst pressure of up to 5 % are possible. Other colors upon request.
The safety factors between the burst pressure and the working pressure as well as the test pressure depend on the operating conditions. For gaous media the outer cover is to be pinpricked.
Regarding the safety factor for gaous media plea contact your local SPIR STAR® asmbling center.
The indicated working pressure refers to the ho only. Depending on the ud fitting the permitted working pressure of a ho asmbly may be less.
*) Blast-Pro® fittings may only be ud for tube cleaning operations inside the tube. They have not been designed for the u outside of tubes.
We rerve our rights for technical changes without notice. Subject to printing errors.
