Hyspin AWS 46SAFETY DATA SHEET
GHS product identifier Hyspin AWS 46
Manufacturer Supplier
BP (China) Industrial Lubricants Co., Ltd.19-22F, Youyou International Plaza
No. 76 Pujian Rd. Shanghai P.R.C. , 200127Tel: +86 21 38605888
Carechem: +86 10 5100 3039 (24 hours)
EMERGENCY TELEPHONE NUMBER
Hydraulic fluid
For specific application advice e appropriate Technical Data Sheet or consult our company reprentative.
U of the substance/mixture
456617-MY01Product code 456617
SDS no.
Relevant identified us of the substance or mixture and us advid against Not classified.
GHS Classification Signal word
No signal word.
Hazard statements No known significant effects or critical hazards.
Precautionary statements Prevention Not applicable.Respon Not applicable.Storage Not applicable.Disposal
Not applicable.
Other hazards which do not result in classification
Defatting to the skin.
Note: High Pressure Applications
Injections through the skin resulting from contact with the product at high pressure constitute a major medical emergency.
See 'Notes to physician' under First-Aid Measures, Section 4 of this Safety Data Sheet.GHS label elements Substance/mixture Mixture
深眼窝There are no additional ingredients prent which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this ction.
Occupational exposure limits, if available, are listed in Section 8.
Highly refined ba oil (IP 346 DMSO extract < 3%). Proprietary performance additives.
Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.
Wash skin thoroughly with soap and water or u recognid skin cleanr.
Remove contaminated clothing and shoes. Wash clothing before reu. Clean shoes thoroughly before reu. Get medical attention if symptoms occur.
If inhaled, remove to fresh air. Get medical attention if symptoms occur.
Skin contact
白绣球Inhalation Ingestion Description of necessary first aid measures
Eyelids should be held away from the eyeball to ensure thorough rinsing. Check for and remove any
contact lens. Get medical attention.
Notes to physician
Treatment should in general be symptomatic and directed to relieving any effects. Note: High Pressure Applications
Injections through the skin resulting from contact with the product at high pressure constitute a major medical emergency. Injuries may not appear rious at first but within a few hours tissue becomes swollen, discoloured and extremely painful with extensive subcutaneous necrosis.
Surgical exploration should be undertaken without delay. Thorough and extensive debridement of the wound and underlying tissue is necessary to minimi tissue loss and prevent or limit permanent damage. Note that high pressure may force the product considerable distances along tissue planes.
Specific treatments No specific treatment.
Indication of immediate medical attention and special treatment needed, if necessary Most important symptoms/effects, acute and delayed
See Section 11 for more detailed information on health effects and symptoms.
No action shall be taken involving any personal risk or without suitable training.
Protection of first-aiders
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.
Hazardous thermal戒酒药
decomposition products Specific hazards arising from the chemical Combustion products may include the following:
carbon oxides (CO, CO 2) (carbon monoxide, carbon dioxide)
In a fire or if heated, a pressure increa will occur and the container may burst.Fire-fighters should wear positive pressure lf-contained breathing apparatus (SCBA) and full turnout gear.
Special protective
equipment for fire-fighters
In ca of fire, u foam, dry chemical or carbon dioxide extinguisher or spray.Extinguishing media Suitable Special precautions for fire-fighters
Do not u water jet.
Not suitable
Environmental precautions Stop leak if without risk. Move containers from spill area. Prevent entry into wers,water cours, baments or confined areas. Contain and collect spillage with non-combustible, absorbent sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations. Dispo of via a licend waste disposal contractor.
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and wers. Inform the relevant authorities if the product has caud environmental pollution (wers, waterways, soil or air).
Large spill
Stop leak if without risk. Move containers from spill area. Absorb with an inert material and place in an appropriate waste disposal container. Dispo of via a licend waste disposal contractor.
Small spill
Methods and materials for containment and cleaning up Personal precautions, protective equipment and emergency procedures
No action shall be taken involving any personal risk or without suitable training.Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilt material. Put on appropriate personal protective equipment. Floors may be slippery; u care to avoid falling.
For non-emergency personnel
For emergency responders If specialid clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the information in "For non-emergency personnel".
Conditions for safe storage
Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (e Section 10) and food and drink. Keep container tightly clod and aled until ready for u. Store and u only in equipment/containers designed for u with this product. Containers that have been opened must be carefully realed and kept upright to prevent leakage. Do not store in unlabelled containers. U appropriate containment to avoid environmental contamination.Not suitable
Prolonged exposure to elevated temperature
篮球课教案Protective measures Put on appropriate personal protective equipment (e Section 8).
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and procesd. Wash thoroughly after handling. Remove
contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures.
Advice on general occupational hygiene
Precautions for safe handling
procedures
atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to u respiratory protective equipment. Reference should be made to appropriate monitoring standards. Reference to national guidance documents for methods for the determination of hazardous substances will also be required.
Hand protection
Wear protective gloves if prolonged or repeated contact is likely. Wear chemical resistant gloves. Recommended: Nitrile gloves. The correct choice of protective gloves depends upon the chemicals being handled, the conditions of work and u,and the condition of the gloves (even the best chemically resistant glove will break down after repeated chemical exposures). Most gloves provide only a short time of protection before they must be discarded and replaced. Becau specific work environments and material handling practices vary, safety procedures should be developed for each intended application. Gloves should therefore be chon in consultation with the supplier/manufacturer and with a full asssment of the working conditions.
Safety glass with side shields.
Eye protection Environmental exposure controls
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cas, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Appropriate engineering controls
All activities involving chemicals should be assd for their risks to health, to ensure exposures are adequately controlled. Personal protective equipment should only be considered after other forms of control measures (e.g. engineering controls)have been suitably evaluated. Personal protective equipment should conform to appropriate standards, be suitable for u, be kept in good condition and properly maintained.
Your supplier of personal protective equipment should be consulted for advice on lection and appropriate standards. For further information contact your national organisation for standards.
Provide exhaust ventilation or other engineering controls to keep the relevant airborne concentrations below their respective occupational exposure limits.
The final choice of protective equipment will depend upon a risk asssment. It is important to ensure that all items of personal protective equipment are compatible.Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be ud to remove potentially contaminated clothing.Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are clo t
o the workstation location.Hygiene measures
Individual protection measures Skin protection
西游记第一回好词好句
In ca of insufficient ventilation, wear suitable respiratory equipment.
The correct choice of respiratory protection depends upon the chemicals being handled, the conditions of work and u, and the condition of the respiratory
equipment. Safety procedures should be developed for each intended application.Respiratory protection equipment should therefore be chon in consultation with the supplier/manufacturer and with a full asssment of the working conditions.
Respiratory protection
overalls will only provide protection against light superficial contamination that will not soak through to the skin. Overalls should be laundered on a regular basis.
When the risk of skin exposure is high (e.g. when cleaning up spillages or if there is a risk of splashing) then chemical resistant aprons and/or impervious chemical suits and boots will be required. Personal protective equipment for the body should be lected bad on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Physical state Melting point Vapour pressure Relative density Vapour density Solubility
Liquid.Not available.Not available.
Not available.Not available.insoluble in water.Mild
Odour
pH
Yellow. [Light]Colour Evaporation rate
Not available.
Auto-ignition temperature Flash point Not available.Clod cup: 200°C (392°F) [Pensky-Martens.]Not available.Not available.Viscosity
Kinematic: 46 mm 2/s (46 cSt) at 40°C
Kinematic: 6.65 mm 2/s (6.65 cSt) at 100°C
Not available.Odour threshold Partition coefficient: n-octanol/water
Appearance Boiling point Not available.Flammability (solid, gas)Lower and upper explosive (flammable) limits Not available.Decomposition temperature Not available.
<1000 kg/m³ (<1 g/cm³) at 15°C Density Not available.
Drop Point Not applicable. Bad on - Physical state Hazardous decomposition products
Conditions to avoid Under normal conditions of storage and u, hazardous decomposition products
should not be produced.
The product is stable.
Chemical stability Incompatible materials Under normal conditions of storage and u, hazardous reactions will not occur.
Under normal conditions of storage and u, hazardous polymerisation will not occur.Possibility of hazardous reactions
Avoid all possible sources of ignition (spark or flame).婴儿身高体重
Reactivity No specific test data available for this product. Refer to Conditions to avoid and Incompatible materials for additional information.Reactive or incompatible with the following materials: oxidising materials.
Information on toxicological effects Aspiration hazard Not available.
Information on the likely routes of exposure
Inhalation Vapour inhalation under ambient conditions is not normally a problem due to low vapour pressure.
No known significant effects or critical hazards.Ingestion Skin contact Defatting to the skin. May cau skin dryness and irritation.No known significant effects or critical hazards.
Eye contact Symptoms related to the physical, chemical and toxicological characteristics
楹联
Skin contact
Ingestion Inhalation No specific data.
No specific data.
Adver symptoms may include the following:irritation dryness cracking
Eye contact No specific data.
Delayed and immediate effects and also chronic effects from short and long term exposure
Routes of entry anticipated: Dermal, Inhalation.
Potential acute health effects General No known significant effects or critical hazards.No known significant effects or critical hazards.Carcinogenicity No known significant effects or critical hazards.Mutagenicity No known significant effects or critical hazards.Teratogenicity
Developmental effects No known significant effects or critical hazards.Fertility effects
No known significant effects or critical hazards.
Potential chronic health effects Overexposure to the inhalation of airborne droplets or aerosols may cau irritation of the respiratory tract.
Ingestion of large quantities may cau naua and diarrhoea.Potential risk of transient stinging or redness if accidental eye contact occurs.
Prolonged or repeated contact can defat the skin and lead to irritation, cracking and/or dermatitis.
Eye contact Inhalation Skin contact Ingestion
Mobility Spillages may penetrate the soil causing ground water contamination.Bioaccumulative potential
Other adver effects No known significant effects or critical hazards.Persistence and degradability
Environmental effects No known significant effects or critical hazards.
Other ecological information
炎热的英语Spills may form a film on water surfaces causing physical damage to organisms.
Oxygen transfer could also be impaired.
This product is not expected to bioaccumulate through food chains in the environment.Expected to be biodegradable.
The generation of waste should be avoided or minimid wherever possible.
Significant quantities of waste product residues should not be dispod of via the foul wer but proc
esd in a suitable effluent treatment plant. Dispo of surplus and non-recyclable products via a licend waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Waste packaging should be recycled.
Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be dispod of in a safe way. Empty containers or liners may retain some product residues. Avoid dispersal of spilt material and runoff
Disposal methods
