USER MANUAL
Front Panel Controls
周杰伦最好听的歌
VALUE: Turn for fi ne adjustment of Decay time when time is displayed. Scrolls through prets when bank or name is displayed. Push to access the PARAMETER menu, hold to access the GLOBAL menu. DECAY: Controls the Decay time of the reverberated signal. The range can depend on the lected reverb machine.
成功需要坚持PRE-DELAY: Adjusts the time between the dry signal and the ont of the reverb, from 0 to 1.5 cond
s. For the Nonlinear and Magneto machines, this knob controls the amount of Feedback.
TONE: Adjusts the high end content of the reverb. Lower ttings create darker, warmer
reverberation, higher ttings are bright and crisp. Set at 12:00 for a nicely balanced top end.
MOD: Adds
modulation to the reverberated signal. Lower ttings modulate the delay lines lightly for a subtle and natural movement, higher ttings tastefully add stronger modulation.
PARAM 1 & 2: Assignable to parameters for the current reverb machine. To assign, choo the desired parameter, press and hold value encoder while turning a PARAM knob.
TYPE: Turn to lect desired reverb machine. Push to toggle the display to show Decay time or the current bank. Hold to save current pret.
A, B, & C LEDS: Green if active. Amber if the pret has been edited. Off if bypasd.
MIDI: Full featured MIDI input and output supporting CCs, Program changes, etc. See MIDI Specifi cation ction.INPUTS: High impedance inputs. U LEFT input for mono.
OUTPUTS: U LEFT output for mono.
CAB FILTER SWITCH: Set switch to ON for a sophisticated speaker大蒜鲶鱼
respon curve. See Cab Filter .
抱不平EXP: Connect an
expression pedal. See EXP Connections形容青春的成语
Rear Panel
The displayed Decay time is the Tr60 value, which is the time it takes for the reverberated signal to decay to -60dB (1/1000th) of its initial value.Hall, Plate, Swell, Bloom, Chorale, Shimmer 500mS — +20.00S
800mS — 10.00S 1.00S — +50.00S 200mS — 1.50mS Nonlinear 50mS — 2.00S Refl ections 133mS — 400mS to toggle the display between BANK, NAME & TIME
push the TYPE encoder
In Depth: PARAM 1 & 2 controls
. Turn either the PARAM 1 or PARAM 2 knob to assign a parameter .
Turn the newly assigned PARAM knob to adjust your reverb machine parameter .
The PARAM 1 & PARAM 2 knobs allow you quick access to any desired menu parameter of the currently active reverb machine. For example, DIFUSN on the Cloud machine can be assigned to one of the parameter knobs to allow for easier control over the reverb diffusion.
Press and hold the value encoder .教师节贺卡的图片
EXP Connections
Connect an external TAP switch for remote control of Pre-Delay (or Decay time with the Magneto and Nonlinear machines). U a standard TRS cable to connect the external switch. Set the EXP MD global tting to TAP to u external tap.
Connect a Strymon
MultiSwitch for external tap, bank, or pret
lection. Set the EXP MD global tting to either TAP, BANK, or PRESET.
Plea refer to the
MultiSwitch ur manual for detailed tup information: www.strymon/support/multiswitch
Connect a standard TRS expression pedal for continuous control over any knob. To lect the knob(s) controlled by the expression pedal, u the EP SET parameter in each pret. All你在干嘛英文
knobs can be controlled simultaneously. See鞭炮怎么写
Common Parameters for t up instructions.
