磷酸铁锂(UPS)电池组规格书
Specification
for
LiFePO4(UPS)拨开乌云 Rechargeable Battery
电池型号: BAK-UPS-Fe-12 V/6AH
Battery Type: BAK-UPS-Fe-12V/6AH
Document No | BAK-UPS-Fe-12V/6AH | Effective date | 2008.5.28 |
Edition | 01 | Pages | 13 |
Approved | Checked | Designed |
| | |
| | | | |
Contents 目录
私房钱是什么意思
1. Preface 前言
2. Definition 定义
2.1 Rated Capacity 标称容量
2.2 Standard Charge Method 标准充电方式
2.3 Quick Charge Method 快速充电方式
2.4 Standard Discharge Method 标准放电方式
2.5 Quick Discharge Method 快速放电方式
3. Battery Type and Size 电池组规格及尺寸
3.1 Battery Type and Specification 电芯型号及说明
4. Specification特性
4.1 Battery Specification 电池组特性
4.2 Battery charge/discharge Curve 电池充/放电曲线
5. Technical characteristic 技术要求
5.1 Battery Usage Conditions 电池使用环境
始知锁向金笼听5.2 Battery Testing Conditions 电池实验环境
5.3 Requirement of The Testing Equipment 测量仪表要求
5.4 Electrochemical Performance 电性能
5.5 Environmental Characteristics环境适应性能
5.6 Safety Characteristics 安全性能
6 PCM Specification 保护板规格
6.1 PCM Electrical Characteristics保护板电性能
7. Warning And Cautions In Handing The LiFePO4 Battery 电池使用时警告事项及注意事项
1. Preface 前言
This specification describes the type and size, performance, technical characteristics, warning and caution of the BAK-UPS-Fe-12V/6AH LiFePO4 rechargeable cell. The specification only applies to BAK-UPS-Fe-12 V/6AH LiFePO4 cell supplied by Bak International (Tianjin) Co., Ltd.
本标准描述了圆柱型BAK-UPS-Fe-12V/6AH 磷酸铁锂电芯的外型尺寸、特性、技术要求及注意事项。本标准适用于比克国际(天津)有限公司生产的圆柱型BAK-UPS-Fe-12V/6AH磷酸铁锂电池。
2. Definition 定义
2.1Rated Capacity 标称容量:
Under 23±2℃, 65±5%RH, it means the capacity value of being discharged by 5-hours ratio to end
voltage 2.0 V, which is signed C5, the unit is mAh.
指在23±2℃,65±5%RH环境下,以5小时率放电至终止电压2.0 V时的容量,以C5表示,单位为毫
安时(mAh)。
2.2Standard Charge Method标准充电方式:
Under 23±2℃, 65±5%RH, it can be charged to 3.6V with constant current of 0.2C5mA, and then, charged continuously with constant voltage of 3.6V until the charged current is 0.01C5 mA.
指在23±2℃,65±5%RH环境下,以0.2C5 mA的电流恒流充电至单体电芯电压3.6V后,转为恒压 3.6 V充电,至充电电流小于0.01C5mA时,停止充电。
2.3Quick Charge Method快速充电方式:
Under 23±2℃, 65±5%RH, it can be charged to 3.6V with constant current of 1C5 mA, and then,
charged continuously with constant voltage of 3.6熊猫吃竹子图片V until the charged current is 0.01C5mA.
指在23±2℃,65±5%RH环境下,以1C5 mA的电流恒流充电至单体电芯电压3.6 V后,转为恒
压3.6 V充电,至充电电流小于0.01C5 mA时,停止充电。
2.4 Standard Discharge Method标准放电方式:
Under 23±2℃, 65±5%RH, it can be discharged to the voltage of 2.0V with constant current of
0.2C5 mA.
指在23±2℃,65±5%RH环境下,以0.2C5mA的电流恒流放电至单体电芯电压2.0 V。
2.5Quick Discharge Method快速放电方式:
Under 23±2℃, 65±5%RH, it can be discharged to the voltage of 2.0V with constant current of
1C5 mA.
指在23±2℃,65±5%RH环境下,以1C5 mA的电流恒流放电至单体电芯电压2.0 V。
3.BATTERY TYPE AND SIZE电池型号及尺寸
3.1 Cell Type and Explication电芯型号及说明
BAK — UPS — Fe — 12V/6AH
Manufacturing Plant厂名— Applied scope应用领域— Battery material电池材料—电池组规格 电压/容量
4. SPECIFICATION特性
4.1. Battery Basis Specification九字对联 电池基本特性
ITEM项目 | SPECIFICATION特性 |
Typical Capacity典型容量 | 6000 mAh@0.2C |
Minimum Capacity 最小容量 | 5800mAh@0.2C |
Nominal Voltage标称电压 | 12.8 V |
Charging Ending Voltage 充电截止电压 | 14.4±0.1 V |
Discharge Ending Voltage 放电终止电压 | 8.0±0.1 V |
Standard Charging Current 标准充电电流 | 1200mA(0.2C潍坊医学院怎么样5 mA) |
Quick Charging Current 快速充电电流 | 生白芍6000 mA(1.0C5 mA) |
Standard Discharge Current 标准放电电流 | 3000 mA(0.5C5 mA) |
Quick Discharge Current 快速放电电流 | 12000mA(2.0C5 mA) |
Max Discharge Current 最大放电电流 | 18000mA(3.0C5 mA) |
Internal Resistance内阻 | <80mΩ(AC Impedance, 1000 Hz) |
Battery Packs Dimension 电池组尺寸 | Height:73mm Max 最大高度:73mm width: 80mm Max 最大宽度:80mm length:92mm Max 最大长度:92 mm |
Anode output wire 正极引出线 | Length:25mm长度:25mm colour: red 颜色:红色 |
Negative output wire 负极引出线 | Length:25mm长度:25mm colour: black 颜色:黑色 |
面试学生会自我介绍 Weight重量 | 1.0±0.1kg(估测) |
| |
Shell appearance in picture one 客体外观如图一