文件修订履历
版次修订内容修订页次修订日期A/00初版发行无无
R&D-D-
18650HP-Fe 2007-4-17
00
11
李鑫
郑荣鹏
张建文
Edition Pages
Approved
Checked
Designed
电芯型号: 18650HP-Fe Cell Type: 18650HP-Fe
Document No
Effective date
for
Lithium-ion Rechargeable Cell
Specification
锂离子电芯规格书
6.1 Standard Test Conditions 标准测试条件6.3 Quick Charge Method 快速充电制式8. Environment Characteristic 环境性能This spec manual is the enterpri standard of BAK, without authorization, any pirate or circulation is prohibited.
2
该规格书为比克公司企业标准，未经授权，不可翻印，传播.
13. Consultation 技术咨询
云吞鸡
14. Requirement for Safety Assurance 安全保证要求
治疗肝炎12.2.2 Discharging 放电
12.2.3 Storage Recommendation 储存条件12. Precautions and Safety Instructions 安全守则12.
1 Standard cell Precaution 电芯防范措施12.2 Cell Operation Instruction 电芯使用说明12.2.1 Charging 充电10. Shipment 出货11. Warranty 质量保证
4. Construction 电芯结构
5. Specification 标准
6. Test Conditions 测试条件
7. Electrical Characteristics 电性能6.2 Standard Charge Method 标准充电制式9. Safety Test 安全测试Contents 目录
1. Preface 前言
2. Description 说明
3. Cell Size
电芯尺寸
2.3 Designation 名称:
BAK——— 18 650 HP ——— Fe ① ② ③ ④ ⑤
①：Indicates the manufacturing plant 代表厂家名称
The letter "BAK" difines ShenZhen BAK Battery Co., LTD. "BAK"代表深圳市比克电池有限公司②：Indicates the diameter of cell 代表电芯直径 18=18mm
③：Indicates the overall height of cell 代表电芯高度 650=65mm
④：Indicates the performance of celll 代表电池性能 The letter "HP" difines high power cell "HP"代表高功率
⑤ ：Indicates the property of the cell 代表电池性能 The letter "Fe" difines LiFePO4 ries cathode
"Fe"代表以LiFePO4为正极材料体系对于图形结构的详细资讯，请参阅图A.A cell is made of cathode,anode,perator,can and header.电芯由正极，负极，隔膜，壳体和盖板组成.
Figure A
This spec manual is the enterpri standard of BAK , without authorization, any pirate or circulation is prohibited.
3
1. Preface 前言
This Product Specification describes the technique requirements,test procedure and precaution notes of
prismatic type Lithium-ion Rechargeable cell to be supplied to customer by Shenzhen BAK Battery Co., LTD.该规格书为比克公司企业标准，未经授权，不可翻印，传播.
本标准规定了由深圳市比克电池有限公司生产的锂离子电芯的技术要求，测试方法及注意事项.2. Description 说明
2.1 Product 产品: Lithium-ion Rechargeable cell 锂离子可充性电芯2.2 Model (Type) 电芯型号: 18650HP-Fe
3. Cell Size 电芯尺寸
4. Construction"秋分"
教师教育网
For details,plea refer to Figure A.
This spec manual is the enterpri standard of BAK , without authorization, any pirate or circulation is prohibited.
4
5.9 Charging Time
阅读日记充电时间
8.0hours
0.2C 5rate 5.13 Specific Power 额定功率>70W 5.11 Max Continuous Discharge current 最
大持续放电电流
20A 5.12 Pul Discharge at 10 Sec 脉冲放电电流40A 5.10 Charge Method 充电方式
Recommended standard charge method 建议标准充电方式
2C 5mA to 3.60V CC/CV
70min Recommended quick charge method 建议快速充电方式
5C 5mA to 3.60V CC/CV彩虹总在风雨后
30min
该规格书为比克公司企业标准，未经授权，不可翻印，传播.
5. Specification 标准
Item 项目
Specification 标准
Remark 备注
5.3 Internal Impedance 交流内阻
≤18m ΩBy AC 1 kHZ 5.4 Nominal Voltage 标称电压 3.20 V From 3.60 V to 2.00V
5.6 End-of-charge Voltage 充电截止电压
3.60V±0.05V 5.5 Cell Weight 电芯重量
35±2g Discharging Temperature 放电温度
-30～45℃
Ambient temperature.Cell skin temperature not exceed 80℃5.7 End-of-charge Current 充电截止电流
0.02C 5A At CV mode 5.8 End-of-discharge Voltage 放电截止电压 2.00 V 5.16 Shelf Life 保质期1year
Typical value from ship state
over 500 cycles
10C 5A Continual Discharge ( 100% DOD)
5.14 Cycle Life 循环性能
5.15 Operating Temperature Range
操作温度范围
Charging Temperature 充电温度
0～45℃Ambient temperature.Cell skin temperature must be <65℃.5.17 Appearance 外观
Without break, scratch, distortion, contamination, leakage and so on 无破裂、划痕、变形、污迹、电解液泄露等
5.1 Typical Capacity 典型容量
1100mAh
0.2C 5rate discharge capacity青皮梨
动漫经典台词
5.2 Mininum Capacity 最小容量
1050mAh Storage Temperature 存储温度 -30～45℃Recommended temperature range for long term storage is –10 ~ +20°
