MATERIAL SAFETY DATA SHEET
1CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME : POLYESTER RESIN
PRODUCT NO. : XB5968-AT
U
APPLICATION :
Industrial
SUPPLIER : ABC Resin Co.,Ltd
小白猪
123, Dongfang Road, Suzhou, Jiangsu, P.R.China
EMERGENCY TEL. : +86(0)512-89188888
CONTAINER SIZE : 10kg/bag，25kg/bag，50kg/bag
2 COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient CAS Number Weight in Percent (%)Notes
terephthalic acid 100-21-0 >50
isophthalic acid 121-91-5 <10
Other Information:
NOTE: The percentage by weight values reported for this product reprent approximate formulation values.
3 HAZARDS IDENTIFICATION
Emergency Overview:
Color: Ivory
Form: granule or powder
Odor: Odorless
Flash Point, °C: Not Applicable
Most Important Hazards: Inhalation may result in respiratory irritation. Prolonged or repeated contact may cau skin irritation. Prolonged contact may cau allergic skin reactions.
Potential Health Effects:
Inhalation: Exposure to dust particles generated from this material may cau irritation of the respiratory tract. Exposure to high concentrations may cau coughing and difficulty breathing.
Ingestion: No adver health effects are expected from swallowing.
Skin Contact: Prolonged or repeated contact may cau skin irritation. Prolonged contact may cau allergic skin reactions.
Eye Contact: Large amounts of dust may cau mechanical irritation.
4 FIRST-AID MEASURES
Eyes
Never introduce ointment or oil into the eyes without medical advice! If pain is prent, refer the victim to an ophthalmologist for treatment and follow up.
Skin contact
If splashed by molten material, cool quickly with water and ek medical aid : do not pull off from skin.
5 FIRE-FIGHTING MEASURES
General information
As in any fire, wear a lf-contained breathing apparatus in pressure-demand and full protective gear. During a fire, irritating and highly toxic gas may be generated by thermal decomposition or combustion Suitable extinguishing agents
In ca of fire, u sand, carbon dioxide or powdered extinguishing agent.
Special hazards caud by the material, its products of combustion or resulting gas.
Carbon monoxide (CO)
Carbondioxide（CO2）
Protective equipment
Mount respiratory protective device
6 ACCIDENTAL RELEASE MEASURES
Person-related safety precautions
U proper personal protective equipment as Exposure controls and personal protection.
Measures for environmental protection
Do not allow to enter wers/ surface or ground water.
Small Spill
U appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispo of according to local and regional authority requirements.
结婚纪念日经典短句Large Spill
U a shovel to put the material into a convenient waste disposal container. Be careful that the product is not prent at a concentration level above TLV.
7 HANDLING AND STORAGE
Handling
Handle in accordance with good industrial hygiene and safety practices. The practices include avoiding unnecessary exposure and removal of material from eyes, skin and clothing.
Engineering measures
Provide natural or mechanical ventilation to minimize exposure. If practical, u local mechanical exhaust ventilation at sources of air contamination such as processing equipment.
无精打采的反义词
Storage
Stable under normal conditions of handling and storage.
8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational exposure limit
National authorities have established limits for particulates not otherwi classified that are the least stringent exposure limits applicable to dusts.
ACGIH TLV: 10mg/m3 (total dust) 8-hr TWA
ACGIH TLV: 3mg/m3 (respirable) 8-hr TWA
Personal Protective Equipment
Safety glass with side shields. Wear suitable gloves.
Respiratory Protection
U approved respiratory protection if exposure limits are exceeded, or overexposure is likely. If respiratory protection is ud, follow all requirements for respiratory programs t forth in government regulations. Ventilation
General ventilation. Local exhaust.
9 PHYSICAL AND CHEMICAL PROPERTIES
General Information
Form: Soild
Colour: White/Ivory
Odour: Odorless
Change in condition
Melting point/Melting range: undetermined
Boiling point/Boiling range: undetermined
Flash point: Not applicable
Self igniting: Product is not lf igniting.
Danger of explosion: Product does not prent an explosion hazard.
10 STABILITY AND REACTIVITY
Conditions to avoid
None known金淼邮件
肖克申的救赎Materials to avoid
年轻的味道None known
Hazardous reactions
Hazardous polymerization does not occur.
Hazardous decomposition products
Conditions: Decomposition occurs above temperature listed below :
Decomposition temperature: > 300℃
Decomposition products: carbon monoxide (CO), carbon dioxide(CO2)
11 TOXICOLOGICAL INFORMATION
Low toxicity
Primary irritant effect
on the skin: Prolonged and/or repeated skin contact may defat skin and possibly cau dermatitis on the eye: Low, reversible irritation.
Sensitization
腺肌瘤最佳治疗方法None known.
Additional toxicological information
When ud and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us.
12 ECOLOGICAL INFORMATION
Ecotoxicity: Not available.
BOD5 and COD: Not available
Products of Biodegradation
Possibly hazardous short term degradation products are not likely. However, long term degradation products may Arid.
13 DISPOSAL CONSIDERATIONS
Incineration, Recycle
All local and national regulations should be followed.
14 TRANSPORT INFORATION
ROAD/RAIL
Other Not regulated for transport.
SEA
Not regulated for transport.
AIR
Not regulated for transport.
15 REGULATORY INFORMATION
EC label
EU Dangerous Substances Directive 67/548/EC.
16 OTHER INFORMATION
This product may contain other copolymers, colour additives, heat stabilizers, flame retardants and/or other performance additives. Under normal u conditions, the additives are contained within the polymer matrix and occupational exposures are expected to be minimal.
周漫漫Data sheets prepared or revid have been completed in accordance with the European Communities Directive 2001/58.
Although the information and recommendations t forth herein (hereinafter "Information") are prented in good faith and believed to be correct as of the date hereof, The company makes no reprentations as to the completeness or accuracy thereof. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purpos prior to u. In no event will The company be responsible for damages of any nature whatsoever resulting from the u of or reliance upon Information. NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS.
