Specification
Total Tolerance
Location
Number of Trials
Measurement System Analysis : By Xbar/R method
1) %Tolerance
2) %Contribution & %Process Repeatability
Repeatability Source
StDev.
Var.
% Contribution % Process Enter the name of the parameter for comparison Standard Deviation
Total Gauge R&R
#DIV/0!#DIV/0!#DIV/0!#DIV/0!(Machine, etc.)
#DIV/0!
Repeatability
保险费率表#DIV/0!#DIV/0!#DIV/0!#DIV/0!
Machine
Variance Reproducibility
0.000000.00000#DIV/0!0.00%
#DIV/0!
Part-to-Part #DIV/0!#DIV/0!#DIV/0!Historical Sigma
Total Variation
#DIV/0!
#DIV/0!#DIV/0!
0.03
Reproducibility
Reproducibility For Xbar/R method, there is no interaction.Standard Deviation 3) Number of Distinct Categories =
多边形面积#DIV/0!
Variance component of Reproducibility is from;
0.000000
Operators
Variance
0.000000
Explanation of Total Variation
% of Total Measurement Error due to;% of Total Variation % of Spec Total Standard Deviation
Repeatability Machine #DIV/0!#DIV/0!(Gauge S.D.) #DIV/0!
Reproducibility
Operators #DIV/0!#DIV/0!Total #DIV/0!#DIV/0!
Total Variability Spread @ 99%
(Gauge S.D. * 5.16) #DIV/0!
Explanation of Repeatability
Repeatability StDev.% of Spec
Machine Repeat on Operators Input Name/ID of Opr."A"#VALUE!#VALUE!
Total % of Spec. contributed
%P/T Ratio Machine Repeat on Operators Input Name/ID of Opr."B"by Measurement Error
#DIV/0!Machine
Repeat on Operators
Input Name/ID of Opr."C"
#DIV/0!
Average #VALUE!#VALUE!
二年级儿童画Summary (by Xbar/R)
- P/T Ratio or %Tolerance =#DIV/0!#DIV/0!- %Contribution
=#DIV/0!#DIV/0!- Number of Distinct Categories (NDC)
=
#DIV/0!
#DIV/0!
TL-FO-00168 Rev.02 10 Oct 03PER TL-WI-00084CONTROLLED
Machin e 0%Operat ors 0%
% of Total Variation
Specification
Total Tolerance
Location
Number of Trials
Measurement System Analysis : By ANOVA method
For an adequate measurement system, at least 50% of averages should fall outside control limits.
Charts Analysis: 1. R Chart by Opr
This chart illustrates the "Repeatability" of each operator. If there are too many points out of control, it might be implied as inadequate gage repeatability.
2. Xbar Chart by Opr
For this chart, the variation between parts is expected.
And all operators should obtain similar values for each part.
This chart is also ud to determine if enough part-to-part variation has been obrved to estimate Part Variation (SigmaParts & VarianceParts).
If too few of the averages fall outside the control limits, maybe the lected parts here are too similar. It is recommended to rerun analysis with different,more heterogeneous, parts.
3. By PartNo.
To u this chart in conjunction with chart #2.
4. By Opr
鸡纵
This chart illustrates the "Reproducibility" of the operators.
5. Opr*PartNo. Interaction
A significant Interaction means that operators tend to have difficulty to have similar measurements from identical parts
0.00000
0.100000.200000.300000.400000.500000.600000.700000.800000.900001.00000A1
A2
A3
A4
A5
A6
A7
A8
A9A10
B1
B2
B3
B4
B5
B6
B7
B8
B9B10
C1
C2
C3
C4
C5
C6
C7
C8
C9C10
Xbar Chart by Opr
For an adequate measurement system, at least 50% of averages should fall outside control limits.2017年中秋节
A
B
C形容努力的诗句
0.00000
0.100000.200000.300000.400000.500000.600000.700000.800000.900001.00000A1
A2
A3
A4
A5
A6A7A8A9A10B1B2B3B4B5B6B7B8B9B10C1C2C3C4C5C6C7C8C9C10
R Chart by Opr
A
B
C
0.10.20.30.40.50.60.70.80.911
2
3
4
5
6
7
8
9
10
By PartNo.
0.00000
0.100000.200000.300000.400000.500000.600000.700000.800000.900001.00000OprA
OprB OprC
By Opr
0.00000
0.100000.200000.300000.400000.500000.600000.700000.800000.900001.000001
2
3
4
56
7
8910
Opr*PartNo. Interaction
OprA
OprB
OprC
饕餮大餐>啄木鸟童话故事
