Coupling Identification - British | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
There are five coupling systems generally ud for hydraulic connections today. They are identified geographically or by country as:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
British Thread Types It is a common misconception that all foreign thread types are metric. This is not always the ca. There are two common thread forms: metric and Whitworth (BSP). The country of origin and the proper nomenclature for each is listed below. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
British Standard Pipe Parallel British Standard Pipe Tapered | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
British Standard Pipe Parallel Popular couplings have British Standard Pipe (BSP) threads, also known as Whitworth threads. The can be parallel(BSPP) or Tapered, with a 30° inverted flare. Flanges are equivalent to SAE Code 61 or Code 62 (except -10*). Port connections are usually made with BSPP threads and a soft metal cutting ring for aling. The BSPP (parallel) male will mate with a BSPP (parallel) female or a female port. The BSPP male has straight threads and a 30° at. The BSPP female has straight threads and a 30° at. The female port has straight threads and a spotface. The al on the port is made with an O-Ring or soft metal washer on the male. The BSPP (parallel) connector is similar to, but not interchangeable with, the NPSM connector. The tread pitch is different in most sizes, and the tread angle is 55° instead of the 60° angle found on NPSM threads. *(-10 is a non-SAE size flange)
| British Standard Pipe Parallel (BSPP) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
top of page | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
British Standard Pipe Tapered The BSPT (tapered) male will mate with a BSPT (tapered) female, or a BSPP (parallel female. The BSPT male has tapered threads. When mating with either the PSPT (tapered) female or the BSPP (parallel) female port, the al is made on the threads. The BSPT connector is similar to, but not interchangeable with, the NPTF connector. The thread pitch is different in most cas, and the thread angle is 55 instead of the 60 angle found on NPTF threads.
| British Standard Pipe Tapered (BSPT) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Thread Information | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Threads of many different kinds are ud for different purpos in piping components. The following are the more common types of pipe threads ud in the piping industry : 1. NPT Tapered Pipe Threads NPT (National Pipe Tapered) is made to specifications outlined in ANSI B1.2. 2. NPTF (National Pipe Thread Dryal) (made to specifications outlined in ANSI B1.20.3.) This piping end is also ud on hydraulic and pneumatic equipment. 3. ISO 7/1 Tapered Pipe Threads International Organization For Standards (ISO 7/1) Tapered (PT). ISO tapered threads are equivalent to DIN 2999. BSP Tr, JIS B0203, R 1/8 and R 1/4 Keg. etc. In application ISO threads are ud similar to NPT threads. However, care should be ud that ISO and NPT threads are not mixed. ISO threads have a 55 deg angle versus 60 deg for NPT. The root and crest configurations are different from NPT. Thread pitch is usually measured in millimeters but may be expresd in Inch. In most sizes the threads-per-inch are different. 4. ISO 228/1 Parallel Pipe Threads (International Organization For Standards (ISO 228/1) Parallel (PF)) ISO Parallel threads are equivalent to DIN ISO 228/1, BSP PL, JIS B0202, G 1/8 and G 1/4 etc. The pipe threads are similar in configuration to ISO 7/1 threads except there is no taper. Therefore do not work by thread interference like the tapered pipe threads of ISO 7/1 or NPT. A gasket, cutting face or O-Ring is normally ud to al the parallel female threaded component. Comparison Chart Pipe Threads
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
本文发布于:2023-07-16 00:50:13，感谢您对本站的认可！
本文链接：https://www.wtabcd.cn/fanwen/fan/89/1083017.html
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系，我们将在24小时内删除。
| 留言与评论（共有 0 条评论） |
