E/P REGULATOR
MODEL NAME
宋美龄传ITV1000, ITV2000, ITV3000 ries ITV1000, ITV2000, ITV3000 ries
Series
Contents
手机简笔画图片
P1 Safety instructions P2 Handling precautions P3-4 Wiring method P5-6 Setting method
P7 Key locking function
P8 Setting of min. pressure, max. pressure and switch output P9 Mode of switch output
P10 Setting of pret pressure P11 Ret function
P11 Error indicating function P12 Detail tting mode P13 Gain tting
水村山郭
P13-14 Sensitivity tting P14 Zero clear P15 Initialize P15-16 LED display
P16
URL
MANUAL
CONTENTS CONTENTS
The safety instructions are intended to prevent a hazardous situation and/or equipment damage. The instructions indicate the level of potential hazard by labels of “CAUTION ” “WARNING ”, or “DANGER ”. To ensure safety, be sure to obrve ISO 4414, JIS B 8370 and other safety practices.
■Explanation of label
△！ WARNING WARNING Operator error could result in rious injury or loss of life. △！
CAUTION CAUTION
剑门雄关Operator error could result in injury or equipment damage.
△！
①comp The compatibility atibility of pneumatic equipment is the responsibility of the person who wh
o designs designs designs the pneumatic system or decides its specifications. the pneumatic system or decides its specifications.
the pneumatic system or decides its specifications. Since the products specified here are ud in various operating conditions, their compatibility for the specific pneumatic system must be bad on specifications or after analys and/or tests to meet your specific requirements. The expected performance and safety assurance will be the responsibility of the person who has determined the compatibility of the system. This person should continuously review the suitability of all items specified, referring to the latest catalog information with a view to giving due consideration to any possibility of equipment failure when configuring a system.
②Only trained personnel should operate pneumatically operated machinery and
equipment.equipment.
Compresd air can be dangerous if an operator is unfamiliar with it. Asmbly, handling or repair of pneumatic systems should be performed by trained and experienced operators.
③Do not rvice machinery / equipment or attempt to remove components until safety is confirmed.safety is confirmed.
A. Inspection and maintenance of machinery / equipment should only be performed once safety
of personnel and equipment is confirmed.
B. When equipment is to be removed. Stop supplied air, exhaust the residual pressure, verify the relea of air, turn the power off and confirm safety before performing maintenance.
C. Before machinery / equipment is restarted, ensure safety before applying power.
④Contact Contact SMC if the product is to be ud in any of the following conditions. SMC if the product is to be ud in any of the following conditions. SMC if the product is to be ud in any of the following conditions.
A. Conditions and environments beyond the given specifications, or if product is ud
outdoors.
B. Installation on equipment in conjunction with atomic energy, railway, air navigation, vehicles, medical equipment, food and beverages, recreation equipment, emergency stop circuits, clutch and brake circuit in press applications, or safety equipment.
C. An application which has the possibility of having negative effects on people, property, or animals requiring special safety analysis.
△！
If power to this product is cut off due to a power failure, etc. when it is in a controlled state, residual pressure will be retained temporarily. Handle carefully when operating with output pressure relead to the atmosphere, as air will continue to flow out.
If supply pressure to this product is interrupted or shut off, while the power is still on, the internal solenoid valve will continue to operate and a humming noi may be generated. Since the life of the product may be shortened, shut off the power supply also when supply pressure is interrupted or shut off.
The optional cable connector is a 4 wire type. When the monitor output (analogue output or switch output) is not being ud, prevent it from touching the other wires as a malfunction could occur.
This product is adjusted for each specification at the time of shipment from the factory. Avoid careless disasmbly or removal of parts, as this can lead to malfunction.
双子男和双鱼女
△！
Take the following steps to avoid malfunction due to noi.
1)Install a line filter etc. to the AC power
line to reduce / eliminate power supply
畅销书籍noi.
2)Avoid malfunction due to noi by
installing this product and its wiring
away from strong electric fields, such as
tho of motors and power line, etc.
3)Be sure to implement protective measures
against load surge for induction loads
(solenoid valves, relays etc.).
4)Turn off the power supply before
installing or removing the connector.
Plea note that the right angled cable connector does not rotate and is limited to only one entry direction.
△
！
① Proceed carefully, as incorrect wiring can cau damage. ② U DC power supply with sufficient capacity and a low ripple. ③ Turn off the power supply to remove and inrt the connector. ④ Never turn the right angled type connector as it is not designed to turn.
Note) The wire color is
加入学生会申请书for when optional cable is ud.
Wiring Wiring diagram (diagram (diagram (Power supply and input signal)Power supply and input signal)Power supply and input signal)
Current/Voltage type（ITV※0※※-0、ITV※0※※-1、ITV※0※※-2、ITV※0※※-3）
第几个教师节
Pret input type（ITV※0※※-4）
１ Brown Power supply ２ White Input signal ３ Blue GND(COMMON) ４ Black Monitor output
