纸盖
纸框
垫板
井字形隔板
纸护角
大塑料袋
除板厚外，其余按Q/DN J 04700-2008七层瓦楞纸板标准执行
All specifications follow the ven-layer corrugated board standard of Q/DN J 04700-2008 with the exception of the thickness of the board
按Q/DN J 04700-2008的双瓦楞隔板标准执行
A产品上市ll specifications follow the double-layer corrugated board standard of Q/DN J 04700-2008
按Q/小小舞蹈家DN J 04700-2008的井字型隔板标准执行
Follow standard Q/DN J 04700-2008 for parator
按国标BB/T 0023-2004标准执行
Follow the national standard BB/T 0023-2004
每层均匀放8袋
1.包装要求packing instruction
1、包装方法：在托盘上依次放纸盖、纸框、大塑料袋、护角（4个），再放隔板、井字形隔板，每层放81个零件，共放六层，共努力的样子486只。最上面放合格证一张，合上大塑料袋并封口，上面放一层隔板，最后用透明胶将纸框的两个门封住。
∙1.packing method:put tray,sleeve,big plastic bag and angle board in turn on the pallet board and then layer pad, parator.81 pcs/layer,6 layers/box, 486pcs/box in total.Put the certificate of quality in it,al the big plastic bag and place a piece of layer pad on the surf
ace and al the two doors with scotch tape.scotch tape
∙ scotch tape
2、每层均匀放入8袋干燥剂（0.025Kg/袋）。
Eight bags of desiccant uniformly distributed on each layer.(0.025kg/bag)
3、大塑料袋由采购科依据实际包装效果组织订货。
Purcha department buy big plastic bags according to the actual packing effect.
4、纸箱要防水、防潮、抗冲击。
The carton should be waterproof,damp-proof and shockproof.
5、纸框两个大侧面的其中一面贴一张纸框标签（格式见表一),并将相应栏目填写完整，同时在如图二所示的相邻两面各粘贴一张条形码（福特A：贴BZ-福特节流阀体菠萝蜜肉-6;福特B：贴BZ-福特节流阀体-7;福特C：贴焦麦芽的功效与作用BZ-福特节流阀体-8）。麦哨
Paste a label on one of the bigger sides of the sleeve(Format e table 1c语言课程),fill in all the columns and paste a piece of bar code on each side showing on figure 2.
6、运输时，采用小集装箱式包装，小集装箱中大纸框两个大侧面的其中一面的正中间位置分别粘贴如图三所示的标签,托盘上每层放6箱，请打"井"字形打包带（如图二）。
apply small container type packing :Label the sleeve following figure3, 6 cartons/pallet,bale the sleeves following figure2宽带速度测试
2.packing instruction
