豪伦诗腕表用户手册中英双语版
HOLUNS Watch U韶关国家森林公园r Manual
质保条款
Warranty claus
HOLUNS按照此质保条款为您的腕表提供24个月的质保服务，质保期自购买或客户签收当日起计，前提是您的手表必须符合HOLUNS质保条款上规定的条件。HOLUNS的全球质保服务涵盖顾客所购买的HOLUNS腕表在交付时存在的材料和制造商的瑕疵。本质保条款生效的前提是：持有HOLUNS腕表身份认证及全球质保卡并且唯一身份条码官网验证有效。
In accordance with the claus of the warranty,蓝屏7e HOLUNS provides the warranty of 24 months for your watch with the warranty period calculated from the date of the purcha or customer gets the receipt under the condition that your watch must meet the conditions laid down in the HOLUNS warranty claus. HOLUNS’s global warranty rvice covers material and manufacturer defects in the delivery of HOLUNS watches the customer purchad. Th
e warranty is effective with the premi: hold HOLUNS watch authentication and global warranty card as well as the unique barcode validated by official website.
质保期内，凭有效的质保卡您有权要求通过修理的方式免费排除任何瑕疵。不能通过修理恢复到您购买的正常使用状态的，HOLUNS保证为您更换一款相同或类似的HOLUNS腕表。更换后的手表的质保条款自被更换手表购买之日起24个月后终止。
Within the warranty period, with a valid warranty card, you are entitled to have any defect repaired 软的拼音which is free of charge. As for the watch that cannot be restored to normal state by repairs, HOLUNS ensures敢想敢干 to replace the same or a similar HOLUNS watch for you. Warranty claus for the replaced watch shall be terminated after 24 months from the date of the purcha of the replaced watch.
制造商的保质条款不涵盖：
The claus of the manufacturer's warranty don’t cover:
1、电池的使用寿命；
1. The rvice life of the battery;
2、常规的磨损和破裂以及老化（如：水晶玻璃刮痕；更换非金属表带和/或表链（如皮革、纺织物、橡胶）的颜色和/或材料；涂层剥落）；
2. Regular wearing, tearing and aging (such as scratch of crystal glass, replacement of color and / or material of non-metallic strap and / or bracelet (such as leather, textiles, rubber); flaking of coating);
3、因非正常使用/滥用、粗心大意、过失、意外（撞击、敲击、挤压、表面被损等等）、不正确的使用、不遵守HOLUNS使用说明而造成的手表任何部件的任何损坏；
3. Any damage of any part due to the non-normal u / abu, carelessness, negligence, accident (hit, knock, extrusion, surface loss, etc.), incorrect u, unconformity with instruction of HOLUNS watch;
4、任何间接或由此产生的损失，例如由于使用HOLUNS腕表因该表的功能失灵、瑕疵、不精确而造成的任何间接损失；
4. Any indirect loss or that resulted from tho like any indirect loss caud due to malfunction, defects and inaccuracy of HOLUNS watches;
5、由任何未经授权的人士拆动过的HOLUNS腕表（诸如：更换电池、提供保养服务和维修）或其原始状态的改动使HOLUNS难以控制的情况。
记叙文的作文 5. HOLUNS watch dismantled by any unauthorized person (such as replacement of the battery and providing maintenance and rvicing) or in the ca that it’s difficult to control the HOLUNS due to change of its original state.
在上述质保服务之外，HOLUNS明示排除购买者任何其它针对HOLUNS的请求权，例如在质保服务之外要求损害赔偿，但强制性法律规定赋予购买者针对制造商的权利除外。
Except the above warranty rvice, HOLUNS expresses to exclude any right to request of purchar for HOLUNS, for example, to claim damages beyond warranty rvice, except for中专几年 buyers’ rights regulated by the mandatory law for the manufacturer.
上述的制造商质保条款：
The above manufacturer warranty claus shall:
1、独立于任何经销商可能提供的保证，对该类保证经销商应独自承担一切责任；
1. Be independent from any guarantee dealers may provide for which dealers should bear all the responsibility alone;灵数23
2、不影响购买者针对经销商所享有的权利，或购买者根据强制性法律规定可享有的针对经销商的权利。
2. Not affect the rights of the purchar for the dealer or the rights the ie浏览器打不开网页怎么办purchar is entitled to have under the mandatory law for dealers.
HOLUNS的特约服务中心保证为您的HOLUNS腕表提供完美的保养服务。如果您的腕表需要任何服务，请联系HOLUNS的特约经销商或任何一家HOLUNS特约服务中心，他们能保证提供符合HOLUNS标准的服务。
HOLUNS authorized rvice center ensures to provide perfect maintenance rvic
es for your HOLUNS watch. If your watch needs any rvice, plea contact the authorized dealer of HOLUNS or any authorized rvice center of HOLUNS, and they can ensure that the rvice provided meets HOLUNS standard.
精细材质
Fine material
HOLUNS所使用的原材料符合欧盟成员国和其它国家相应法律的规定，以环境保护和人类健康为原则。
Raw materials ud by HOLUNS are in line with the appropriate provisions of laws of the EU member states and other countries with the principle of environmental protection and human health.
1、电镀敷层
1. The plating deposited layer
这些敷层通过电解完成。通过设置不同的时间和电流强度，可制作不同厚度和特性的各种敷层（例如金、银、铜等）。
The deposited layer is done by electrolysis. By tting different time and current intensity, the various deposited layers (such as gold, silver, copper, etc.) of different thickness and characteristics can be made.
2、PVD（物理气化沉积）敷层
2. PVD (Physical Vacuum Deposition) deposited layer
该工艺在真空条件下完成。通过离子轰击，在产品上沉淀微小粒子。这样可以生成一层很薄的无杂质成份的镀层（1至3微米），该镀层拥有很高的硬度（氮化物、碳化物等）。
The process is done under vacuum. Through ion bombardment, fine particles are deposited on the product. This can generate a thin layer of non-impurity coating (1-3 microns) which is of very high hardness (nitrides, carbides, etc.).
