手枪简笔画chapter2：物理层课堂练习
Chapter 2: Physical Layer(Clod-exam (25m))
员工晋升评语
Classno___________StuNo_______StuName_______________Grade________
Fill in the blanks(填空45%):
1. The functions of physical layer is to transmit ( ) from one cable to the other side of the cable.
2. The three kinds of guided transmission media are ( ) 、( ) and ( )
3. The range of frequencies transmitted without being strongly attenuated is called( )
4. A connection that allows traffic in both directions simultaneously is called( ).
5. A connection that allows traffic either way, but only one way at a time is called( )
6. A connection that allows traffic only one way is called ( )
7. The two basic categories of multiplexing schemes are ( ) and ( )
8. Two different switching techniques are ud nowadays:( ) and ( ). The two differs in many respects, for example, ( ) requires that a circuit be t up end to end before communication begins.福大全
10. Compared to copper, ( ) is not affected by electromagnetic noi.
True or Fal?(判断15%)
1. A Nyquist’s theorem,a noiless 3-kHz channel cannot transmit binary (i.e., two-level) signals at a rate exceeding 6000 bps.
2. According to Shannon’s theorem, a channel of 3000-Hz bandwidth with a signal to thermal noi ratio of 30 dB can never transmit much more than 30,000 bps.
3. Twisted pairs can only be ud for transmitting either analog or digital signals.
4. Multimode fiber has better transmission properties than Single-mode fiber, so normally
写人的词语it is more expensive.孔文举年十岁
工作流程管理5. Services with more bandwidth than standard telephone rvice are sometimes called broadband.
Questions(40%):
新起点英语1. Television channels are 6 MHz wide. How many bits/c can be nt if four-level digital signals are ud? Assume a noiless channel.
2. Is the Nyquist theorem true for optical fiber or only for copper wire?
咖啡的历史
3. What is the esntial difference between message switching and packet switching?
4.If a binary signal is nt over a 3-kHz channel who signal-to-noi ratio is 20 dB, what is the maximum achievable data rate?
