Apparel Product Standards
Measurement Guidelines for Finished Garments
All Measurements are taken with garment on flat surface。 All fullness and wrinkles should be smoothed out of garment， but garment must not be stretched.
Measurements are taken with garment closures in clod position unless otherwi specified。
日本事件TOPS
A.BUST
Measure straight across front of garment from side to side 1" below armhole, x 2 for
circumference.
B. ACROSS SHOULDER
Measure straight across back of garment where shoulder am intercts top of armhole am (shoulder point) to opposite shoulder point。
Apparel Product Standards
斑马的英语怎么说Measurement Guidelines for Finished Garments
C. ARMHOLE
Measure on curve along armhole am from top shoulder point to bottom interction of armhole am and side am， x 2 for circumference.
The armhole drop is measured using an imaginary straight line drawn from the outer top edge of the armhole or sleeve am down to an imaginary straight line drawn horizontally through the lowest point of armhole when garment is placed flat and smooth with shoulder ams in a natural position。
D.帮助人的成语SLEEVE AT MUSCLE （UPPER ARM)
Measure straight sleeve in a line perpendicular to the fold line at the top edge of the sleeve. Begin measurement point 1" away from armhole am。
APPENDIX C
Apparel Product Standards
皂片Measurement Guidelines for Finished Garments
E.WAIST (tops)
E1. Measure straight across front of garment from side to side on a straight line at right angles to the specified distance down from high point shoulder, x 2 for circumference.
E2。 Measure straight across front of garment from side to side at narrowest part of
front, x 2 for circumference。
E3. Measure straight across front of garment from side to side along the constructed
waist am, x 2 for circumference。
F.SWEEP (tops)
F1. Measure along bottom curve of garment from side to side (garment clod)， x 2
for circumference.
F2. Measure along bottom curve of garment from front edge to front edge （garment
幼儿园晨会
opened）。
F3。 Sweater rib – measure along bottom of rib relaxed， x 2 for circumference.
Apparel Product Standards
Measurement Guidelines for Finished Garments
G. FRONT LENGTH
From highpoint shoulder measure straight down front of garment to bottom。
卢瑟福H. BACK LENGTH
H1。 From center of ba of back neck am measure straight down back of garment
to bottom。
H2. From high point shoulder measure straight down back of garment to bottom.
Apparel Product Standards
Measurement Guidelines for Finished Garments如何入团
I. SLEEVE LENGTH
I1。 From shoulder point at top of armhole, measure straight down to bottom of sleeve
or cuff.
猫的作文三年级
I2。 From the center of back neck （CBN） measure straight across to shoulder point at
top of armhole， then straight down to bottom of sleeve or cuff.
I3. From neck am measure to shoulder point， then straight down to bottom of
Sleeve or cuff。
Apparel Product Standards
Measurement Guidelines for Finished Garments
J.CUFF/SLEEVE OPENING
J1. Measure across opening of sleeve or cuff from side to side， x 2 for circumference.
J2。 Extended measurement – With cuff fully extended, measure across opening of
cuff from side to side, x 2 for circumference.
