平键 | 1 | GB/T 1095-2003 | 平键 键槽的剖面尺寸 Square and Rectangular keyways |
2 | GB/T 1096-2003 | 普通型 平键 Square and rectangular keys | |
3 | GB/T 1097-2003 | 导向型 平键 Square and rectangular keys | |
4 | GB/T 1566-2003 | 薄型平键 键槽的剖面尺寸 Square and Rectangular thin keyways | |
5 时代先锋 | GB/T 1567-2003 | 薄型 平键Square and rectangular thin keys | |
螺栓 | 1 | GB/T 10-1988 | 沉头方颈螺栓Flat countersunk square neck bolts |
2 | GB/T 11-1988 | 沉头带榫螺栓Flat countersunk nib bolts | |
3 | GB/T 12-1988 | 半圆头方颈螺栓Cup head square neck bolts | |
4 | GB/T 1228-1991 | 钢结构用高强度大六角头螺栓High strength bolts with large hexagon head for steel structures | |
5 | GB/T 1231-1991 | 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件Specifications of high strength bolts with large hexagon head, large hexagon nuts,plain washers for steel structures | |
6 | GB/T 12869-1991 | 机床夹具零件及部件 双头螺栓The parts and units of jigs and fixtures--Double end stud | |
7 | GB/T 12870-1991 | 机床夹具零件及部件 槽用螺栓The parts and units of jigs and fixtures--Slot bolt | |
8 | GB/T 13-1988 爱睡觉的人 | 半圆头带榫螺栓Cup head nib bolts | 中国现代诗歌|
9 | GB/T 14-1998 | 大半圆头方颈螺栓 C级Cup head square neck bolts with large head--Product grade C | |
10 | GB/T 15049.6-1996 | CAD 标准件图形文件 几何图形和特性规范 螺栓CAD standard parts file--Specification of geometry and parameters--Bolts | |
11 | GB/T 15-1988 | 大半圆头带榫螺栓Cup head nib bolts with large head | |
12 送汪伦 | GB/T 152.4-1988 | 紧固件 六角头螺栓和六角螺母用沉孔Fasteners--Counterbores for hexagon bolts and nuts | |
13 | GB/T 15389-1994 | 螺杆Threaded rods | |
14 | GB/T 158-1996 | 机床工作台 T形槽和相应螺栓Machine tool tables--T-slots and corresponding bolts | |
15 | GB/T 16674.1-2004 | 六角法兰面螺栓 小系列Hexagon bolts with flange-Small ries | |
16 | GB/T 16674.2-2004 | 六角法兰面螺栓 细牙 小系列Hexagon bolts with flange with metric fine pitch thread-Small ries | |
17 | GB/T 16938-1997 | 紧固件 螺栓、螺钉、螺柱和螺母通用技术条件Fasteners--General requirements for blots,screws,studs and nuts | |
18 | GB/T 16939-1997 | 钢网架螺栓球节点用高强度螺栓High strength bolts for joints of space grid structures | |
19 | GB/T 18230.1-2000 | 栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property class 8.8 and 10.9 | |
20 | GB/T 18230.2-2000 | 栓接结构用大六角头螺栓 短螺纹长度 C级 8.8 和 10.9级Hexagon bolts for high-strength structural bolting with large width across flats(short thread length)-Product grade C-Property class 8.8 and 10.9 | |
21 | GB/T 27-1988 | 六角头铰制孔用螺栓 A和B级Hexagon fit bolts--Product grade A and B | |
22 | GB/T 28-1988 | 六角头螺杆带孔铰制孔用螺栓 A和B级Hexagon fit bolts with Split pin hole on shank--Product grade A and B | |
23 | GB/T 29.1-1988 | 六角头头部带槽螺栓 A和B级Hexagon bolts with slot on head--Product grade A and B | |
24 | GB/T 29.2-1988 | 十字槽凹穴六角头螺栓Cross recesd hexagon bolts with indentation | |
25 | GB/T 3098.10-1993 | 武装人紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母Mechanical properties of fasteners Bolts, scrows, studs and nuts made of non-ferrous metals | |
26 | GB/T 3098.1-2000 | 紧固件机械性能 螺栓、螺钉和螺柱Mechanical properties of fasteners made of carbon steel and alloy steel--Part 1:Bolts,screws and studs | |
27 | GB/T 3098.13-1996 | 紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～10mm Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm | |
28 | GB/T 3098.6-2000 | 紧固件机械性能 不锈钢螺栓、螺钉和螺柱Mechanical properties of fasteners-Bolts,screws and studs made of stainless-steel | |
29 | GB/T 3099-1982 | 螺栓、螺钉、螺母及附件名词术语Bolts,screws,nuts and accessories-Terminology and nomenclature | |
30 | GB/T 31.1-1988 | 六角头螺杆带孔螺栓 A和B级Hexagon bolts with split pin hole on shank--Product grade A and B | |
31 | GB/T 31.2-1988 | 六角头螺杆带孔螺栓 细杆 B级Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B | |
32 | GB/T 31.3-1988 | 六角头螺杆带孔螺栓 细牙 A和B级Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B | |
33 | GB/T 3103.1-2002 | 紧固件公差 螺栓、螺钉、螺柱和螺母Tolerances for fasteners- Bolts,screws, studs and nuts | |
34 | GB/T 3103.2-1982 | 紧固件公差 用于精密机械的螺栓,螺钉和螺母Tolerances for fasteners--Bolts,screws and nuts for fine mechanics | |
35 | GB/T 3105-2002 | 普通螺栓和螺钉 头下圆角半径General purpo bolts and screws-Radii under the head | |
36 | GB/T 3106-1982 | 螺栓,螺钉和螺柱的公称长度和普通螺栓的螺纹长度 Bolts,screws and studs--Nominal lengths and thread lengths for general purpo bolts | |
37 | GB/T 32.1-1988 | 六角头头部带孔螺栓 A和B级Hexagon bolts with wire holes on head--Product grade A and B | |
38 | 重阳节英文GB/T 32.2-1988 | 六角头头部带孔螺栓 细杆 B级Hexagon bolts with wire holes on head--Reduced shank--Product grade B | |
39 | GB/T 32.3-1988 | 六角头头部带孔螺栓 细牙 A和B级Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B | |
40 | GB/T 3227-2000 | 螺栓螺母用装配工具 机动套筒工具的传动四方Asmbly tools for screws and nuts-Driving squares for power socket tools | |
番茄炒蛋做法41 | GB/T 3228-2000 | 螺栓螺母用装配工具 冲击式机动四方传动套筒的尺寸Asmbly tools for screws and nuts-Machine-operated square drive sockets ("impact")-Dimensions | |
42 | GB/T 3229-2000 | 螺栓螺钉用装配工具 机动螺刀头的六角传动端Asmbly tools for bolts and screws-Hexagon drive ends for machine-operated screwdriver bits | |
43 | GB/T 35-1988 | 小方头螺栓 B级Square head bolts with small head--Product grade B | |
44 | GB/T 3632-1995 | 钢结构用扭剪型高强度螺栓连接副Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures | |
45 | GB/T 3633-1995 | 钢结构用扭剪型高强度螺栓连接副 技术条件Technical requirement for ts of torshear type high strength bolt hexagon nut and plain washer for steel structures | |
46 | GB/T 37-1988 | T型槽用螺栓Bolts for T--Slot | |
47 | GB/T 3750.3-1983 | 卡套式铰接六角螺栓Hollow screws | |
48 | GB/T 5276-1985 | 紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注Fasteners--Bolts,screws,studs and nuts--Symbols and designations of dimensions | |
49 | GB/T 5277-1985 | 紧固件 螺栓和螺钉通孔Fasteners--Clearance holes for bolts and screws | |
50 | GB/T 5286-2001 | 螺栓、螺钉和螺母用平垫圈 总方案Plain washers for bolts,screws and nuts--General plan | |
51 | GB/T 5650-1985 | 扩口式管接头空心螺栓Flared type tube fittings--Inverted flare bolts | |
52 | GB/T 5779.1-2000 | 紧固件表面缺陷 螺栓、螺钉和螺柱一般要求Fasteners-Surface discontinuities-Bolts,screws and studs for general requirements | |
53 | GB/T 5779.3-2000 | 紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求Fasteners-Surface discontinuities-Bolts,screws and studs for special requirements | |
54 | GB/T 5780-2000 | 六角头螺栓 C级Hexagon head bolts-Product grade C | |
55 | GB/T 5781-2000 | 六角头螺栓 全螺纹 C级Hexagon head bolts-Full thread-Product grade C | |
56 | GB/T 5782-2000 | 六角头螺栓Hexagon head bolts | |
57 | GB/T 5783-2000 | 六角头螺栓 全螺纹Hexagon head bolts-Full thread | |
58 | GB/T 5784-1986 | 六角头螺栓 细杆 B级Hexagon head bolts--Reduced shank--Product grades B | |
59 | GB/T 5785-2000 | 六角头螺栓 细牙Hexagon head bolts with fine pitch thread | |
60 | GB/T 5786-2000 | 六角头螺栓 细牙 全螺纹Hexagon head bolts with fine pitch thread-Full thread | |
61 | GB/T 5789-1986 | 六角法兰面螺栓 加大系列 B级Hexagon flange bolts--Heavy ries--Product grade B | |
62 | GB/T 5790-1986 | 六角法兰面螺栓 加大系列 细杆 B级Hexagon flange bolts--Heavy ries--Product grade B | |
63 | GB/T 6188-2000 | 螺栓和螺钉用内六角花形Hexalobular internal driving feature for bolts and screws | |
64 | GB/T 7559-1987 | 纤维增强塑料层板螺栓连接挤压强度试验方法FRP Laminates-test method for bearing strength by bolted joints | |
65 | GB/T 794-1993 | 加强半圆头方颈螺栓Strengthened cap head square neck bolts | |
66 | GB/T 798-1988 | 活节螺栓Eye bolts | |
67 | GB/T 799-1988 | 地脚螺栓Eyelet bolts | |
68 | GB/T 800-1988 | 沉头双榫螺栓Flat countersunk double nib bolts | |
69 | GB/T 801-1998 | 小半圆头低方颈螺栓 B级Cup head square neck bolts with small head and short neck--Product grade B | |
70 | GB/T 8-1988 | 方头螺栓 C级Square head bolts--Product grade C | |
71 | GB/T 8262-1987 | 圆头椭圆颈螺栓Bolts,round head with oval neck | |
72 | GB/T 892-1986 | 螺栓紧固轴端挡圈Lock rings at the end of shaft with bolt | |
73 | GB/T 9074.11-1988 | 十字槽凹穴六角头螺栓和平垫圈组合件Cross recesd hexagon bolt with indention and plain washer asmblies | |
74 | GB/T 9074.1-2002 | 螺栓或螺钉和平垫圈组合件Bolt or screw and washer asmblies with plain washers | |
75 | GB/T 9074.12-1988 | 十字槽凹穴六角头螺栓和弹簧垫圈组合件Cross recesd hexagon bolt with indentation and single coil spring lock washer asmblies | |
76 | GB/T 9074.13-1988 | 十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件Cross recesd hexagon bolt with indentation, single coil lock washer and plan washer asmblies | |
77 | GB/T 9074.15-1988 | 六角头螺栓和弹簧垫圈组合件Hexagon head bolt and single coil spring lock washer asmblies | |
78 | GB/T 9074.16-1988 | 六角头螺栓和外锯齿锁紧垫圈组合件Hexagon head bolt and rrated lock washer external teeth asmblies | |
79 | GB/T 9074.17-1988 | 六角头螺栓、弹簧垫圈和平垫圈组合件Hexagon head bolt, single coil spring lock washer and plain washer asmblies | |
本文发布于:2023-06-29 17:10:04，感谢您对本站的认可！
本文链接：https://www.wtabcd.cn/fanwen/fan/89/1060397.html
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系，我们将在24小时内删除。
| 留言与评论（共有 0 条评论） |
