Consumer Information
WARNING
Prevent rious injury or death from falls or sliding out:
• Always cure child with the restraint belts until child is able to get in and out of the product without help (about 21/2 years old). The tray is not designed to hold child in the product.
• Never leave child unattended.
• Always cure the product on a chair using the bottom and back attachment straps. Never u the product on a stool or bench that does not have a at back.• Only u upright position when child is capable of sitting upright unassisted. Prevent rious injury or death:
• Do not u in motor vehicles.
IMPORTANT! Before asmbly and each u, inspect this product for damaged hardware, loo joints, missing parts or sharp edges. DO NOT u if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.• P lea read the instructions before asmbly and u of this product.
• A dult asmbly and tup is required. No tools needed for asmbly or tup.• P roduct features and decorations may vary from photos.• A ustralia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.• N ew Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Parts
Consumer Information
Seat with Restraint System and Attachment Straps
Seat Back with Restraint System恍然大悟的近义词
Pad
Tray
Care
• T he pad, at, at back and straps may be wiped clean using a mild cleaning solution and damp
cloth. Do not u bleach. Do not u harsh or abrasive cleanrs. Rin clean with water to remove residue.• T he tray is top rack dishwasher safe (or u the bottom rack - without using the drying cycle).To remove the pad:• P ush to remove the shoulder straps from the slots on the waist restraint buckle.
• Lift the top of the pad off of the at back.
• Fit the shoulder belts back through the slots in the pad.• Unfasten the pad hooks from the front edge of the at.• Unbuckle the waist belts from the crotch belt.
• Fit the crotch belt down through the slot in the pad.• Fit the waist belts back through the slots in the pad.• Remove the pad from the at.
• To replace the pad: refer to Asmbly steps 2 - 6.
I MPORTANT! Never u this product without the restraint system. Replace the crotch, waist and shoulder belts for high chair u; replace the crotch and waist belts for booster at u.
• Fit the pad onto the at.
• Fit the at back tabs into the slots in the top of the at. • P ush the top of the at back so that the large tab “snaps” into place in the at.
日有所诵Seat
Asmbly
Seat Back
Large Tab
Slot
公文写作试题Pad
1
2
Tab
• F it the waist belts on the at through the lowest slots in the pad. Make sure the waist belts are not twisted. • F it the crotch belt on the at through the large slot in the pad. Make sure the crotch belt is not twisted.
• F asten the hooks on bottom of the pad to the front edge of the at.
3
Lowest Slots
Waist Belts
Crotch Belt
高中物理目录Hooks
4
Slot
Tab
兄弟的英文单词• I nrt the shoulder belts through the slots in the pad.- U the lower shoulder belt slots for a smaller baby.- U the upper shoulder belt slots for a larger baby. • Make sure the shoulder belts are not twisted.
5
Upper Slots
Lower Slots
• L ocate the longer portion of the shoulder belt, under-neath the adjuster.
• F it the end of this longer portion through the slot in the top of the waist belt.
H int: If the end does not fit at all through the slot, you are probably inrting the wrong end. Make sure you inrt the longer portion of the belt through the slot. • R epeat this procedure to attach the other shoulder belt to the other waist belt.
6
李白的台词
Adjusterr
Slot
Shoulder Belt
Asmbly • W hile squeezing the latches together with one hand, lift or lower the ba.
H int: This will require some force. You may want to pull one latch and lift or lower one side of the ba. Then repeat this procedure to lift or lower the other side of the ba.
• Relea the latches to lock the ba in place
• W hile adjusting at height, you may accidentally pull the ba completely off of the at bottom. If this should happen, simply squeeze the latches together and fit the ba back onto the at bottom.
Adjusting the Seat Height
Latches
搞笑的英语Ba
Ba
java毕业设计Side View
