服装aql验货标准（Garment AQL inspection standard）[export] clothing AQL inspection standards
Check clothing, average, level
Clothing AQL inspection standards - I collect and organize
Garment AQL inspection standard
An overview of.AQL AQL: average quality English check is the abbreviation of level, which is the average level of quality, it is a parametric test, not standard. When checking, according to batch size, inspection level and AQL value, determine the quantity of sampling and the quantity of qualified and unqualified products. Clothing quality inspection adopts a sampling plan, the quantity of clothing qualified quality level (AQL) is 2.5, the inspection level is the general inspection level, the inspection accuracy is normal inspection
大连徐明
羊排怎么做好吃又简单Two. Check the items of clothing
1. dimensional appearance inspection: - dimensional appearance form
1). Key dimensions - collar long (woven) neck width, neck circumference (knitting) development (knittin
g) bust, sleeve (sleeve), get the sleeve opening sleeve (to sleeve edge), long (woven) Center (knitting) / shoulder top pants, waist, hip circumference under so, after the waves, zipper, cuffs, inner pants / long after other (single / t), vertical look, plus the top coat and trours size
金钱英语2) non key size points --- non critical size points, minimum size, shoulder height, chest circumference, sleeve length, collar width, sleeve length, front and back wave, waist circumference, lower hip circumference, flat pocket position, opening.
2. defect inspection: the appearance, shape, dressing and found defects of all clothes are parately classified.
Three. The scoring standard AQL is the largest defect product score in a hundred pieces of clothing. It is up to Ac according to the sample number after the sample inspection. The average processing level of the garment is satisfied. Up to Re (pieces) of disqualification, the average processing level of this garment is considered unacceptable. The standard for scoring in the cour of examination is the following:
1) general defects --- from the organization, specifications and quality standards of the order, it will not achieve the performance of the product, affecting the appearance and internal appearance of the
garment. Non critical size points, general defects. Rework can eliminate the appearance and internal impact of defects on garments. In the garment factory where the defect foundation has been repaired, a 100% re inspection must be made before shipment. The inspector can specify the particular specifications, colors, sizes, etc. of the inspection. Three general defects are converted to a rious defect.
冷春2) rious defects --- affecting the appearance and shape of
戒指的戴法与含义
garments. When consumers buy, they e this kind of defect will not buy this dress, or this kind of defect will lead to the first or after wearing uncomfortable clothes, consumers will return clothes. If damaged, stains, bars, holes, key size?? Serious defect. If a rious defect is found, the inferior garment is judged unacceptable or unacceptable.
Four. Three step inspection (before production inspection, start production line inspection, final product inspection)
1). This is the pre production inspection of prenatal check, check the specific specifications or company general requirements, the first meeting is very important, the purpo is to establish the quality assurance system together with the factory, each department is the latest data (check), the fo
cus of this inspection is: packaging trademark printing flower shape, dressing color standards, specifications and re check all relevant information in its contents before clear cut open.
2). Check to make sure the first production or after the first water product sampling inspection finished, check the contents: size, color, design, material, structure, crafts, product trademarks, packaging, price, if there is a problem of the information feedback to cutting, wing, they should re check and correct. Schedule 2--- online checklist
3) product inspection, general production, at least 80% products have been completed, and packaging, waiting for exports, checked samples must be taken from the finished garment. If the inspection can not pass, the factory needs 100% responsibility, make 100% inspection of the goods in place, and
report the final rework to the buyer,
All expens incurred in connection with the rework shall be borne by the factory. Final inspection report: 1. boxes of wheat accurate, 2. carton gross weight, size, 3. net weight, 4. final size, color matching. Schedule 3--- final inspection form
Five. Needle inspection in the production management, clothing and other wing products will often have a broken needle (including needle pins, etc.) are. In the 80s of last century, the frequent occurrence of consumer injuries caud by broken needles in clothing, which prompted? The government enacted legislation to protect the rights and interests of consumers, so as to strengthen the control of broken needles. According to? Laws and regulations, production and distribution of products, such as broken needles exist, the producers and llers will be subject to heavy penalties, such as damage to consumers, but also for compensation In order to avoid the economic loss caud by broken needles, the clothing importers not only require the manufacturers to check the products before leaving the factory, but also t up a special inspection factory to check the needles. Hang or attach a needle mark to a product that has been checked for approval.
大王滩风景区Six. Clothing test test 1., need to show cloth has been tested, 2. clothing test also tells the following practice
1) take out 2 of the bulk from the bulk of the shipment. Test the clothes of the same quality sample group as the bulk of the goods. Test 3) u standard test methods for garment washing and test by the factory itlf
4) the final test must be checked by the inspector himlf, is there any violation of the facilities, and, if any, a detailed obrvation report should be written to the guest
Schedule 1: list of defects
1) the appearance of garments, associated defects, * defects affecting clothing * * reworked garments on this basis, customers are asked to review the garments for reasons of the natural characteristics麻辣大虾的做法
* in combination with the key defects, the cloth shall be made of cloth, the color of which exceeds the specifications, or more than the permitted limits on the card
* color film / line / visible accessories that affect the appearance of the garment * obvious spherical 204. print defects * lack of color, less colour, no covering
苦寒吟* wrong 1/16, * * pattern mismatch, specification 205., pair of bars, dislocation, and when organizational structure requires alignment, 1/4
* 1/4 "(more than open dislocation in front or at the pants) * 1/8" above, dislocation or center placket block
* 1/8 "above, dislocation and pockets of cloth cover 206. arched or oblique, on both sides of not more than 1/2" peer dressing, * broken yarn (yarn), broken needle, less lead hole
