No. 088 Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab
美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室
ADDRESS 地址: 5-6/F, #6 Building Hang Sang Chong Industrial Center, No. 107, Fu Kang Road, Heng Gang Town, Lang Gang District, Shenzhen City, Guang Dong Province, China 中國廣東省深圳市龍崗區橫崗鎮富康路107號
恒生昌工業中心六棟5-6樓
AUTHORISED REPRESENTATIVE 委任代表:Mr. CHUI Kam Tong, Senior Manager 徐錦棠先生，高級經理
ENQUIRY 查詢:Mr. CHUI Kam Tong, Senior Manager 徐錦棠先生，高級經理
Tel 電話 :3185 5156
Fax 傳真:3185 5153
E-mail 電郵:KT.
CLIENTELE 服務對象: Conditionally available for public testing 有限度公眾服務
ACCREDITED TEST
CATEGORIES
認可測試類別
: Toys and Children’s Products玩具及兒童產品
SCOPE OF
ACCREDITATION
認可範圍
古巴: As shown on the following pages 詳見後頁
* * * * * * * *
Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab
美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室
TEST CATEGORY 測試類別
ITEMS, MATERIALS
OR PRODUCTS TESTED
測試項目、材料或產品
SPECIFIC TESTS OR
PROPERTIES MEASURED
特定測試或量度的特性
SPECIFICATION, STANDARD METHOD
OR TECHNIQUE USED
規範、標準方法或應用技術
TOYS and
CHILDREN'S Chemical tests :-
PRODUCTS
玩具及兒童產品All toys - paints and similar ASTM F963-08 4.3.5
surface coating materials - Total lead content Clau 4.3.5.1
Test procedures for compliance testing :
CPSC Test Method: CPSC-CH-E1003-09
Standard Operating Procedure for Determining Lead
(Pb) in Paint and Other Similar Surface Coatings,
April 26, 2009
<Excluding the following>
Composite
testing
- Soluble elements Clau 4.3.5.2
antimony, arnic, chromium, lenium,
cadmium, mercury, barium, lead
Toys and other articles US Public Law 110 -314 (HR4040)
intended for u by Consumer Product Safety Improvement Act 2008
children – paint and other US 16 CFR Part 1303
similar surface-coating - Total lead content Test procedures for compliance testing :
materials CPSC Test Method: CPSC-CH-E1003-09
Standard Operating Procedure for Determining Lead
(Pb) in Paint and Other Similar Surface Coatings,
April 26, 2009
<Excluding the following>
Composite
testing
Toys - Migration of the elements EN 71-3: 1994 + A1: 2000 + AC: 2002
antimony, arnic, chromium, lenium, AS/NZS ISO 8124.3: 2003
cadmium, mercury, barium, lead ISO 8124-3: 1997
Toys - Migration of the elements GB 6675-2003 & A1: 2005, Clau 4.3 & Annex C
玩具Antimony, Arnic, Barium, Cadmium,
Chromium, Lead, Mercury, Selenium
特定元素的遷移
銻, 砷, 鋇, 鎘, 鉻, 鉛, 汞, 硒
Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab
美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室
TEST CATEGORY 測試類別
ITEMS, MATERIALS
OR PRODUCTS TESTED
測試項目、材料或產品
SPECIFIC TESTS OR
PROPERTIES MEASURED
特定測試或量度的特性
SPECIFICATION, STANDARD METHOD
OR TECHNIQUE USED
規範、標準方法或應用技術
TOYS and
CHILDREN'S Electrical tests :-
PRODUCTS
(cont’d) Battery operated toys - Battery operated toys safety tests ASTM F963-07 Claus 4.25 and 8.18
玩具及兒童產品電池動力玩具電池動力玩具安全測試<
Excluding the following>
(續上) 4.25.10
AS/NZS ISO 8124.1: 2002 + Amdt.1 Annex A
GB 6675-2003 + A1 Annex A.A
Electric toys supplied at - Compliance inspection and safety tests EN 50088: 1996 + A1 + A2 + A3 + A4
extra-low voltage 安全測試< Excluding the following >
電玩具Claus 11.1 (IP tests to EN 60529)
16 (component tests to other standards),
19.2.2 (burning test to other standards) and
20 (radiation tests);
Annexes C, E, G and I
IEC 62115: 2003 + A1
< Excluding the following >
Claus 11.1 (IP tests to IEC 60529),
16(component tests to other standards),
19.2.2 (burning test to other standards) and
20 (radiation tests);
Annexes B, C and E
EN 62115: 2005
< Excluding the following >
Claus 11.1 (IP tests to IEC 60529),
16(component tests to other standards),
19.2.2 (burning test to other standards) and
20 (radiation tests);
Annexes B, C and E
GB 19865-2005
< Excluding the following不包含>
Claus 11.1 (IP tests to GB 4208),
16 (component tests to other standards),
19.2.2(burning tests to other standards),
20 (radiation tests);
Annexes B, C and E
11.1 (耐水測試),
16 (按其他標準的元件測試),
19.2.2 (按其他標準的燃燒測試),
20 (輻射試驗)
附錄 B 及C及 E
Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab
一言止杀美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室
TEST CATEGORY 測試類別
ITEMS, MATERIALS
OR PRODUCTS TESTED
測試項目、材料或產品
SPECIFIC TESTS OR
PROPERTIES MEASURED
特定測試或量度的特性
SPECIFICATION, STANDARD METHOD
OR TECHNIQUE USED
規範、標準方法或應用技術
TOYS and
CHILDREN'S Toys Flammability tests AS/NZS ISO 8124.2: 2002
PRODUCTS ISO 8124-2: 1994
(cont’d) <Excluding the following>
玩具及兒童產品for the above two standards
(續上) Tests for cellulo nitrate, flammable gas,
extremely flammable liquids,
highly flammable liquids and flammable liquids;
surface flash test
EN 71-2: 2003
<Excluding the following>
Tests for cellulo nitrate, flammable gas
extremely flammable liquids,
highly flammable liquids, flammable liquids,
flammable gels and highly flammable solids;
surface flash test
ISO 8124-2: 2007
EN 71-2: 2006 + A1
<Excluding the following>
For the above two standards
Tests for cellulo nitrate, flammable gas
highly flammable liquids, flammable liquids,
flammable gels and highly flammable solids;
surface flash test
ASTM F963-07 (e1) 4.2
< Excluding the following >
Test to 16 CFR 1610
Toys Flammability tests GB 6675-2003 with amendment no. 1
玩具燃燒性能測試Clau 4.2 & Annex B
不包含:
亞硝酸纖維、
易燃氣體、極度易燃液體、
高度易燃液體、易燃液體、
易燃固體及表面閃燃效應測試
Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab
美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室
TEST CATEGORY 測試類別
ITEMS, MATERIALS
OR PRODUCTS TESTED
測試項目、材料或產品
SPECIFIC TESTS OR
PROPERTIES MEASURED
特定測試或量度的特性
SPECIFICATION, STANDARD METHOD
OR TECHNIQUE USED
規範、標準方法或應用技術
TOYS and
CHILDREN'S Physical and mechanical tests :- (cont’d)
PRODUCTS
(cont’d) Toys ASTM
F963-07
(e1) 玩具及兒童產品
(續上) Safety requirements :
-
Material quality 4.1
<Excluding the following>
Examination of reprocesd materials to 4.3.1
- Sound producing toys 4.5 (with modification by using sound level meter
complying with the specifications of
IEC 60651 and IEC 60804)
<Excluding the following>
Push and pull toys and toys using percussion caps
- Small objects 4.6
<Excluding the following>
4.6.2
-
Accessible edges 4.7
- Projections 4.8
- Accessible points 4.9
- Wires or rods 4.10
- Nails and fasteners 4.11
- Packaging film 4.12
<Excluding the following>
Sheeting with an average thickness of less
than 0.00150 in
供销社是什么性质的单位- Folding mechanisms & hinges 4.13
- Cords, straps and elastics 4.14
<Excluding the following>
4.14.4
- Stability and over-load requirements 4.15
- Wheels, tires & axles 4.17
- Holes, clearance and accessibility of 4.18
mechanisms
- Simulated protective devices 4.19
- Projectile toys 4.21
- Teethers and teething toys 4.22
- Rattles 4.23
- Squeeze toys 4.24
-
Toys intended to be attached to a crib or 4.26
Playpen
- Stuffed and beanbag-type toys 4.28
- Stroller and carriage toys 4.29
- Balloons 4.32
- Certain toys with spherical ends 4.33
- Marbles 4.34
- Balls 4.35
- Pompoms 4.36
- Hemispheric-shaped objects 4.37
Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab
美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室
TEST CATEGORY 測試類別
愚人节是什么节ITEMS, MATERIALS
OR PRODUCTS TESTED
測試項目、材料或產品
SPECIFIC TESTS OR
幼儿作息时间表PROPERTIES MEASURED
特定測試或量度的特性
SPECIFICATION, STANDARD METHOD
OR TECHNIQUE USED
規範、標準方法或應用技術
TOYS and
CHILDREN'S Physical and mechanical tests :- (cont’d)
PRODUCTS
(cont’d) Toys (cont’d) ASTM
F963-07
(e1) 玩具及兒童產品ab词语
(續上) - Labeling requirements 5
- Instructional literature 6
- Producer’s markings 7
- Test methods 8
AS/NZS ISO 8124.1: 2002 + Amdt. 1
Requirements:
- Normal u 4.1
- Reasonably foreeable abu 4.2
- Material 4.3
<Excluding the following>
成都摩托车4.3.2
- Small parts 4.4
- Shape, size and strength of certain toys 4.5
- Edges 4.6
- Points 4.7
雪白雪白的词语- Projections 4.8
-
Metal wires and rods 4.9
- Plastic film or plastic bags in packaging and 4.10
in toys <Excluding the following>
4.10b
- Cords and elastics 4.11
<Excluding the following>
4.11.7
- Folding mechanisms 4.12
- Holes, clearances and accessibility of 4.13
mechanisms
- Springs 4.14
-
Stability and overload requirements 4.15
- Simulated protective equipments such as 4.17
helmets, hats and goggles
- Projectile toys 4.18
<Excluding the following>
Bow and arrows
- Aquatic toys 4.19
- Liquid-filled toys 4.24
- Mouth-actuated toys 4.25
<Excluding the following>
4.25c
-
Toy roller skates and toy skateboards 4.26
- Test methods 5
