图框尺寸THE SMD
CODEBOOK
SMD Codes.
SMD devices are, by their very nature, too small to carry conventional miconductor type numbers. Instead, a somewhat arbitrary coding system has grown up, where
the device package carries a simple two- or three-character ID code.
Identifying the manufacturers' type number of an SMD device from
the package code can be a difficult task, involving combing through
many different databooks.
This HTML book is designed to provide an easy means of device
identification. It lists well over 3,400 device codes in alphabetical
order, together with type numbers, device characteristics or
equivalents and pinout information.
How to u the SMD Codebook
To identify a particular SMD device, first identify the package style and note the ID code printed on the device. Now look up the code in the alphanumeric listing which forms the main part of this book by clicking on the first character shown in the left-menu.
最新网络红歌
Unfortunately, each device code is not necessarily unique. For example a device coded 1A might be either a BC846A or a FMMT3904. Even the same manufacturer may u the same code for different devices!
If there is more than one entry, u the package style to differentiate between devices with the same ID code. This compilation has been collected from R P Blackwell G4PMK, manufacturers' data and other sources of SMD device ID codes, pinout and leaded device equivalent information.
The entries under the Manufacturer column are not intended to be comprehensive; rather they are intended to provide help on locating sources of more detailed information if you require it.
照片里的故事ID Code Variations
Many manufacturers u an extra letter as their own identification code. If the device is from Philips it will sometimes have a lower ca 'p' (or sometimes 't') added to the code; Siemens devices usually have a lower ca 's'.
For example, if the code is 1A, according to the table there are a number of possibilities:
• 1A BC846A Phi ITT N BC546A
• 1A FMMT3904 Zet N 2N3904
• 1A MMBT3904 Mot N 2N3904
• 1A IRLML2402 IR F n-ch mosfet 20V 0.9A
This has been a problem in the past, however recently manufacturers have been adding lower ca letters which clarify the code.
Many recent Motorola devices have a small superscript letter after the device code, such as SA C . (This smaller letter is merely a month of manufacture code.)
Many devices from Rohm Semiconductors which start with G have direct equivalents found in the rest of the number. For example GD1 is the same as D1 which is a BCW31.
Some devices have a single coloured letter (usually on extremely small diode packages). Colour, if significant, is shown in small type after the code letter.
An 'L' suffix usually indicates a low-profile package, such as an SOT323 or
SC70.
SOT323.SC70.
Rever joggle devices do prent a few problems. They oftern have an 'R' in the type number. A rever package is one where the lead have been bent up instead of down. So it's a mirror image of a conventional device. Identification is usually possible from the code number, but some manufacturers u the same code. In the cas, it's a ca of looking at the device with a magnifying glass. The leads of most normal packages come out clor to the circuit board side of the device; converly a rever joggle package will have them coming out clor to the 'top' of the device.
Sometimes a ries of devices, derived from the same die, have related type (not code) numbers. Often an 'R' will indicate a rever joggle package, and/or a 'W' indicate a smaller package variant, such as SOT343. Sometimes similarities are also found in the code numbers. For example:
Recently some manufacturers have ud a symbol or lower ca letter to indicate the country of manufacture. The have been ignored in the alphabetical ordering. For example:
• '67' is the code for a BFP67 (SOT143 package) ,
• '67R' is the code for the rever joggle variant BFP67R (SOT143R),
• 'W67' is the code for a SOT343 package version.
SOT143.
'Z-S' and 'ZtS ' are both 2PC4081Q devices made by Philips; the first made in Hong Kong and the cond in Malaysia; this appears in the codebook classified under ZS.
Leaded equivalent device and information
Where possible, the listing gives the part number of a conventional wire-leaded device with equivale
nt characteristics. If the leaded device is well-known then no more information is given. If the device is less common, some additional information will sometimes be given. Where no exact leaded equivalent exists, a brief device description is given, which may be sufficient to allow substitution with another device.
When describing device characteristics, some terms are implied from the type of device. For example, a voltage specified for a rectifier diode is usually the maximum PIV (peak inver voltage) of the diode, but for a zener diode the operating (zener voltage) will be given.
Normally, where a voltage, current or power is specified, the will be limiting values. For example, a device specified as NPN 20V 0.1A 1W is a NPN transistor with a Vce (max) of 20V, maximum collector current of 100mA and a maximum total power dissipation of 1W. Some of the transistors are types with integrated resistors; in the list, a ba resistor means a resistor connected in ries with the ba. When two resistor values are given, the first is the ries ba resistor, and the cond the resistor between ba and emitter.
Digital Transistors (dtr)
The are transistors with built-in resistors.方头大耳
Some have one resistor between ba and emitter, others in ries with the ba. Many others have both.
To keep things simple, the ries resistor is called R1 and the ba emitter resistor is called R2. If both are prent, then two values are given, R1 first. So 4k7 + 10k means that R1 (the ba resistor) is 4k7 and R2 (the resistor between ba and emitter) is 10k.
Conclusion
Identifying the manufacturers' type number of an SMD device from the package code can be a difficult task, involving combing through many different databooks. This HTML book is designed to provide an easy means of device identification.
Abbreviations
amp amplifier
atten attenuator
a anode
b ba
c cathode
ca common anode
cc common cathode农业经济问题
comp complement
d drain
dg dual gate
dtr digital transistor (e codebook introduction) enh enhancement (mode - FETs)
fet field effect transistor
fT transition frequency
GaAsfet Gallium Arnide field effect transistor
g gate
gnd ground
gp general purpo
我的房东叫别扭hfe small signal current gain
i/p input
Id drain current
Ig gate current
Ir rever leakage current (diodes)
jfet junction field effect transistor
MAG maximum available gain
max maximum
min minimum
mmic microwave minature integrated circuit modamp modular amplifier - an mmic amplifier mosfet metal oxide insulated gate fet
n-ch n-channel fet (any type)
励志微电影
npn npn bipolar transistor
o/p output
p-ch p-channel fet (any type)
pin pin diode
pkg package
pnp pnp bipolar transistor
prot protection, protected (as in mosfet gate) res resistor
s source
r ries
Si silicon
substr substrate
sw switch or switching
Vce collector - emitter voltage (maximum) Vcc collector supply voltage
Manufacturer abbreviations
Agi Agilent (was HP)
Fch Fairchild
HP Hewlett-Packard (Now Agilent)
Inf Infineon (was Siemens)
厦门方特欢乐世界ITT ITT Semiconductors
MC Mini-Circuits
Mot Motorola (now ON Semiconductors) Nat National Semiconductor
Nec NEC
NJRC New Japan Radio Co
ON ON Semiconductors (was Motorola) Phi Philips
Roh Rohm
SGS SGS-Thompson
Sie Siemens (now Infineon)
Sil Siliconix (Vishay-Silliconix)
Tem Temic Semiconductors
Tfk Telefunken (Vishay-Telefunken)
Tok Toko Inc.
Zet Zetex