Commission communication in the framework of the implementation of Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for u within certain voltage limits
(Text with EEA relevance)
(Publication of titles and references of harmonid standards under the directive)
(2010/C 71/02)
ESO (1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
Date of cessation
of presumption of conformity
of superded standard
Note 1
Cenelec EN 41003:1998
Particular safety requirements for equipment to be connected to telecom
munication networks EN 41003:1996
Note 2.1
Date expired
(1.1.2002)
Cenelec EN 41003:2008
Particular safety requirements for equipment to be connected to telecom
munication networks and/or a cable distribution system EN 41003:1998
Note 2.1
1.7.2011
Cenelec EN 50063:1989
Safety requirements for the construction and the installation of equip
ment for resistance welding and allied process
Cenelec EN 50065-4-2:2001
Signalling on low-voltage electrical installations in the frequency range
3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz -- Part 4-2: Low voltage
decoupling filters - Safety requirements
EN 50065-4-2:2001/A1:2003Note 3Date expired
(1.12.2005)
EN 50065-4-2:2001/A2:2005Note 3Date expired
(1.3.2008) Cenelec EN 50065-4-7:2005
Signalling on low-voltage electrical installations in the frequency range
3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz -- Part 4-7: Portable low
voltage decoupling filters - Safety requirements
Cenelec EN 50085-1:1997
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 1: General requirements
生活处处有语文
Cenelec EN 50085-1:2005
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 1: General requirements EN 50085-1:1997
Note 2.1
Date expired
(1.7.1999)
Cenelec EN 50085-2-1:2006
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 2-1: Cable trunking systems and cable ducting systems
intended for mounting on walls and ceilings
Cenelec EN 50085-2-2:2008
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 2-2: Particular requirements for cable trunking systems and
cable ducting systems intended for mounting underfloor, flushfloor, or
onfloor
Cenelec EN 50085-2-3:1999
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 2-3: Particular requirements for slotted cable trunking sys
tems intended for installation in cabinets
Cenelec EN 50085-2-4:2009
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 2-4: Particular requirements for rvice poles and rvice
posts
Cenelec EN 50086-1:1993
Conduit systems for cable management -- Part 1: General requirements
ESO(1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
of presumption of conformity
of superded standard
Note1
Cenelec EN 50086-2-4:1994
Conduit systems for cable management -- Part 2-4: Particular require
ments for conduit systems buried underground
EN 50086-2-4:1994/A1:2001Note 3Date expired
(1.8.2003) Cenelec EN 50090-2-2:1996
Home and Building Electronic Systems (HBES) -- Part 2-2: System over
view - General technical requirements
EN 50090-2-2:1996/A1:2002Note 3Date expired
(1.8.2004)
EN 50090-2-2:1996/A2:2007Note 3 1.11.2011
Cenelec EN 50106:1997
Safety of houhold and similar electrical appliances - Particular rules for
routine tests referring to appliances under the scope of EN 60335-1 and
EN 60967HD 289 S1:1990
+ A1:1992
Note 2.1
Date expired
(1.4.1999)
EN 50106:1997/A1:1998Note 3Date expired
(1.7.1999) EN 50106:1997/A2:2001Note 3Date expired
(1.8.2003)
Cenelec EN 50106:2008
Safety of houhold and similar electrical appliances - Particular rules for
routine tests referring to appliances under the scope of EN 60335-1
EN 50106:1997
and its amendments
Note 2.1
1.6.2011
Cenelec EN 50117-1:2002
Coaxial cables -- Part 1: Generic specification
EN 50117-1:2002/A1:2006Note 3Date expired
(1.7.2009) Cenelec EN 50117-2-1:2005
Coaxial cables -- Part 2-1: Sectional specification for cables ud in
cabled distribution networks - Indoor drop cables for systems operating
at 5 MHz – 1 000 MHz
EN 50117-2-1:2005/A1:2008Note 3 1.12.2010 Cenelec EN 50117-2-2:2004
Coaxial cables -- Part 2-2: Sectional specification for cables ud in
cabled distribution networks - Outdoor drop cables for systems operat
ing at 5 MHz – 1 000 MHz
EN 50117-2-2:2004/A1:2008Note 3 1.12.2010 Cenelec EN 50117-2-3:2004
Coaxial cables -- Part 2-3: Sectional specification for cables ud in
cabled distribution networks - Distribution and trunk cables for systems
operating at 5 MHz – 1 000 MHz
EN 50117-2-3:2004/A1:2008Note 3 1.12.2010 Cenelec EN 50117-2-4:2004
芹菜叶的功效与作用Coaxial cables -- Part 2-4: Sectional specification for cables ud in
cabled distribution networks - Indoor drop cables for systems operating
at 5 MHz – 3 000 MHz
EN 50117-2-4:2004/A1:2008Note 3 1.12.2010 Cenelec EN 50117-2-5:2004
Coaxial cables -- Part 2-5: Sectional specification for cables ud in
cabled distribution networks - Outdoor drop cables for systems operat
ing at 5 MHz – 3 000 MHz
EN 50117-2-5:2004/A1:2008Note 3 1.12.2010
ESO(1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
of presumption of conformity
of superded standard
Note1
Cenelec EN 50117-3-1:2002
Coaxial cables -- Part 3-1: Sectional specifications for cables ud in Tele
com applications - Miniaturized cables ud in digital communication
systems
Cenelec EN 50117-4-1:2008
Coaxial cables -- Part 4-1: Sectional specification for cables for BCT
cabling in accordance with EN 50173 - Indoor drop cables for systems
operating at 5 MHz – 3 000 MHz
Cenelec EN 50146:2000
Cable ties for electrical installations
Cenelec EN 50156-1:2004
Electrical equipment for furnaces and ancillary equipment -- Part 1:
家园建设Requirements for application design and installation
Cenelec EN 50178:1997
Electronic equipment for u in power installations
Cenelec EN 50194:2000
Electrical apparatus for the detection of combustible gas in domestic
premis -- Part 1: Test methods and performance requirements
Cenelec EN 50194-1:2009
Electrical apparatus for the detection of combustible gas in domestic
premis -- Part 1: Test methods and performance requirements EN 50194:2000
Note 2.1
1.9.2011
Cenelec EN 50214:2006
Flat polyvinyl chloride sheathed flexible cables HD 359 S2:1990
+ EN 50214:1997
Note 2.1
Date expired
(1.10.2008)
Cenelec EN 50250:2002
Conversion adaptors for industrial u EN 50250:1998
Note 2.1
Date expired
(1.7.2005)
Cenelec EN 50262:1998
Cable glands for electrical installations
EN 50262:1998/A1:2001Note 3Date expired
(1.4.2003)
EN 50262:1998/A2:2004Note 3Date expired
(1.10.2007)
Cenelec EN 50266-1:2001
Common test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 1:
Apparatus HD 405.3 S1:1993
Note 2.1
Date expired
(1.8.2002)
Cenelec EN 50266-2-1:2001
Common test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 2-1:
Procedures - Category A F/R HD 405.3 S1:1993
Note 2.1
Date expired
(1.8.2002)
Cenelec EN 50266-2-2:2001
Common test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 2-2:
Procedures - Category A HD 405.3 S1:1993
Note 2.1
Date expired
(1.8.2002)
Cenelec EN 50266-2-3:2001
Common test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 2-3:
Procedures - Category B HD 405.3 S1:1993
Note 2.1
汗马功劳
Date expired
(1.8.2002)
ESO(1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
of presumption of conformity
of superded standard
Note1
Cenelec EN 50266-2-4:2001
Common test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 2-4:
Procedures - Category C HD 405.3 S1:1993
Note 2.1
Date expired
(1.8.2002)
Cenelec EN 50266-2-5:2001
Common test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 2-5
Procedures - Small cables - Category D
Cenelec EN 50267-1:1998
Common test methods for cables under fire conditions - Tests on gas
evolved during combustion of materials from cables -- Part 1: Apparatus HD 602 S1:1992
Note 2.1
Date expired
(1.3.2000)
Cenelec EN 50267-2-1:1998鲜艳造句
Common test methods for cables under fire conditions - Tests on gas
evolved during combustion of materials from cables -- Part 2-1: Proce
dures - Determination of the amount of halogen acid gas
Cenelec EN 50267-2-2:1998
Common test methods for cables under fire conditions - Tests on gas
evolved during combustion of materials from cables -- Part 2-2: Proce
dures - Determination of degree of acidity of gas for materials by mea
suring pH and conductivity
Cenelec EN 50267-2-3:1998
Common test methods for cables under fire conditions - Tests on gas
evolved during combustion of materials from cables -- Part 2-3: Proce
dures - Determination of degree of acidity of gas for cables by determi
nation of the weighted average of pH and conductivity HD 602 S1:1992
Note 2.1
Date expired
(1.3.2000)
Cenelec EN 50274:2002
Low-voltage switchgear and controlgear asmblies - Protection against
electric shock - Protection against unintentional direct contact with haz
ardous live parts
Cenelec EN 50288-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 1: Generic specification
Cenelec EN 50288-2-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 2-1: Sectional specification for screened cables
characterid up to 100 MHz - Horizontal and building backbone cables
一画的字
Cenelec EN 50288-2-2:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 2-2: Sectional specification for screened cables
characterid up to 100 MHz - Work area and patch cord cables
Cenelec EN 50288-3-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 3-1: Sectional specification for unscreened cables
characterid up to 100 MHz - Horizontal and building backbone cables
Cenelec EN 50288-3-2:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 3-2: Sectional specification for unscreened cables
characterid up to 100 MHz - Work area and patch cord cables
Cenelec EN 50288-4-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 4-1: Sectional specification for screened cables
characterid up to 600 MHz - Horizontal and building backbone cables
ESO(1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
of presumption of conformity
of superded standard
Note1
Cenelec EN 50288-4-2:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 4-2: Sectional specification for screened cables
characterid up to 600 MHz - Work area and patch cord cables
Cenelec EN 50288-5-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 5-1: Sectional specification for screened cables
characterized up to 250 MHz - Horizontal and building backbone cables
Cenelec EN 50288-5-2:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 5-2: Sectional specification for screened cables
characterized up to 250 MHz - Work area and patch cord cables
Cenelec EN 50288-6-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 6-1: Sectional specification for unscreened cables
characterid up to 250 MHz - Horizontal and building backbone cables
Cenelec EN 50288-6-2:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 6-2: Sectional specification for unscreened cables
characterid up to 250 MHz - Work area and patch cord cables
Cenelec EN 50288-7:2005
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 7: Sectional specification for instrumentation and
control cables
Cenelec EN 50289-1-3:2001
Communication cables - Specifications for test methods -- Part 1-3: Elec
trical test methods - Dielectric strength
Cenelec EN 50289-1-4:2001
Communication cables - Specifications for test methods -- Part 1-4: Elec
trical test methods - Insulation resistance
Cenelec EN 50290-2-1:2005
Communication cables -- Part 2-1: Common design rules and construc
tion
Cenelec EN 50290-2-20:2001
Communication cables -- Part 2-20: Common design rules and construc
tion - General
Cenelec EN 50290-2-21:2001
Communication cables -- Part 2-21: Common design rules and construc
tion - PVC insulation compounds
EN 50290-2-21:2001/A1:2007Note 3Date expired
(1.3.2010)
Cenelec EN 50290-2-22:2001
Communication cables -- Part 2-22: Common design rules and construc
tion - PVC sheathing compounds
EN 50290-2-22:2001/A1:2007Note 3Date expired
(1.3.2010)
Cenelec EN 50290-2-23:2001
Communication cables -- Part 2-23: Common design rules and construc
tion - PE insulation
Cenelec EN 50290-2-24:2002
Communication cables -- Part 2-24: Common design rules and construc
tion - PE sheathing
EN 50290-2-24:2002/A1:2008Note 3 1.11.2011
ESO(1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
of presumption of conformity
of superded standard
Note1
Cenelec EN 50290-2-25:2002
Communication cables -- Part 2-25: Common design rules and construc科龙空调
tion - Polypropylene insulation compounds
Cenelec EN 50290-2-26:2002
Communication cables -- Part 2-26: Common design rules and construc
tion - Halogen free flame retardant insulation compounds
EN 50290-2-26:2002/A1:2007Note 3Date expired
(1.3.2010)
Cenelec EN 50290-2-27:2002
Communication cables -- Part 2-27: Common design rules and construc
tion - Halogen free flame retardant thermoplastic sheathing compounds
EN 50290-2-27:2002/A1:2007Note 3Date expired
(1.3.2010)
Cenelec EN 50290-2-28:2002
Communication cables -- Part 2-28: Common design rules and construc
tion - Filling compounds for filled cables
Cenelec EN 50290-2-29:2002
Communication cables -- Part 2-29: Common design rules and construc
银耳百合汤的功效
tion - Cross-linked PE insulation compounds
Cenelec EN 50290-2-30:2002
Communication cables -- Part 2-30: Common design rules and construc
tion - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and
sheathing
Cenelec EN 50290-4-1:2001
Communication cables -- Part 4-1: General considerations for the u of
cables - Environmental conditions and safety aspects
Cenelec EN 50363-0:2005
Insulating, sheathing and covering materials for low-voltage energy
cables -- Part 0: General introduction
Cenelec EN 50363-1:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 1: Cross-linked elastomeric insulating compounds
Cenelec EN 50363-2-1:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 2-1: Cross-linked elastomeric sheathing compounds
Cenelec EN 50363-2-2:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 2-2: Cross-linked elastomeric covering compounds
Cenelec EN 50363-3:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 3: PVC insulating compounds
Cenelec EN 50363-4-1:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 4-1: PVC sheathing compounds
Cenelec EN 50363-4-2:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 4-2: PVC covering compounds
Cenelec EN 50363-5:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 5: Halogen-free, cross-linked insulating compounds
