SYS7180VE
PICMG Single Board Computer For socket 478 CPU With VGA/ LAN (Pentium 4™&Celeron™& Intel® Celeron®D TM CPU)
Ur’s Manual
Copyright
This document is copyrighted, © 2004. All rights are rerved. The original manufacturer rerves the right to make improvements to the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its u, nor for any infringements upon the rights of third parties that may result from such u.
Acknowledgments
IBM/AT and PS/2 are trademarks of International Business Machines Corporation.
Award is a registered trademark of Award Software International, Inc.
Intel®, Celeron™, Pentium 4™ and Pentium 4™ are registered trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft Corporation.
All Other product names or trademarks are properties of their respective owners.
Liability
The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be liable for any incidental or conquential damages due to such defect or conquences that ari from inexperienced usage, misu, or malfunction of this device. Additional Information and Assistance
1. The manufacturer recommends using a grounded plug to ensure proper
motherboard operation. Care should be ud in proper conjunction
with a grounded power receptacle to avoid possible electrical shock.
All integrated circuits on this motherboard are nsitive to static
electricity. To avoid damaging components from electrostatic
discharge, plea do not remove the board from the anti-static packing
before discharging any static electricity to your body, by wearing a
wrist-grounding strap. The manufacturer is not responsible for any
damage to the motherboard due to improper operation.
2. Visit the Grantech web site w where you can
find the latest information about the product.
3. Contact your distributor, sales reprentative, or Grantech's customer
rvice center for technical support if you need additional assistance.
Plea have the following information ready before you call:
•Product name and rial number
•Description of your peripheral attachments
•Description of your software (operating system, version, application, etc.) •A complete description of the problem
•The exact wording of any error messages
Table of Contents
Table of Contents
CHAPTER 1INTRODUCTION (1)
1.1S PECIFICATION (1)
1.2C HECK L IST (1)
1.3D ESCRIPTION (2)
1.4P OWER R EQUIREMENTS (2)
心的菩提
1.5C ONNECTOR & J UMPER L OCATION (4)
1.6B LOCK D IAGRAM (5)
CHAPTER 2HARDWARE INSTALLATIONS (6)
2.1I NSTALLATION PROCEDURE (6)
2.2CPU I NSTALLATION: (7)
2.3M AIN M EMORY I NSTALLATION: DIMM1/2 (8)
2.4J UMPER S ETTINGS: (10)
2.5C ONNECTORS S ETTING: (12)
2.5.1F RONT P ANEL C ONNECTOR: J1 (13)
2.5.2 USB C ONNECTOR: USB1-2 USB3-4 (14)
2.5.3P ARALLEL P ORT C ONNECTOR: LPT (15)
2.5.4S ERIAL P ORT CONNECTOR:COM1/COM2 (16)
2.5.5IDE PORT C ONNECTOR: IDE1/ IDE2 (16)
2.5.6F LOPPY D ISK C ONNECTOR: FLOPPY (17)
2.5.7A DAPTER CONNECTOR FOR 10/100 LAN: LAN1 (18)
2.5.8A DAPTER CONNECTOR FOR GIGA LAN: LAN2 (19)
2.5.9E XTERNAL K EYBOARD/M OUSE C ONNECTOR:...................20Table of Contents
2.5.10VGA C ONNECTOR: (21)
2.5.11K EYBOARD / M OUSE C ONNECTOR: (21)
2.5.12CPU FAN C ONNECTOR: (21)
2.5.13ACPI C ONNECTOR: J2 (22)
CHAPTER 3BIOS SETUP (24)
3.1I NTRODUCTION (24)
3.2M AIN M ENU (26)
3.3S TANDARD CMOS S ETUP (28)
3.4A DV ANCED BIOS F EATURES S ETUP (30)
3.5A DV ANCED C HIPSET F EATURES S ETUP (34)
3.6I NTEGRATED P ERIPHERALS (38)
3.7P OWER M ANAGEMENT S ETUP (43)
3.8P N P/PCI C ONFIGURATION S ETUP (49)
3.9PC H EALTH S TATUS (51)
3.10D EFAULTS M ENU (51)
3.11S UPERVISOR/U SER P ASSWORD S ETTING (52)
3.12E XIT S ELECTING (52)
3.13POST M ESSAGES (53)
3.14POST B EEP (53)
3.15E RROR M ESSAGES (53)
Appendix (59)
Chapter 1 Introduction
1.1 Specification
Processor Support Intel® Pentium TM 4 CPU up to 3.06 GHz
Support Intel® Celeron TM CPU up to 2.60 GHz
Support Intel® Celeron®D TM CPU up to 2.80 GHz (Prescott core) Chipt Intel®82845GV chipt supports 400/533MHz FSB
Memory Two 184-pin DDR DIMMs socket, up to 2GB of 266/333MHz
DDR SDRAM
BIOS Award 4Mbit PnP flash BIOS
VGA Integrated in 845GV, AGP4X
Share memory up to 64MB with system main-memory LAN LAN1: Intel® 82562ET Ethernet controller, supports 10/100M
Ba-T
LAN2: (optional)Intel®82540EM Ethernet controller, supports
10/100/1000 Ba-T
Wake On LAN support
USB Four USB ports, Hi-speed USB 2.0
Super I/O Mini-DIN: 1x PS/2 keyboard/mou connector
RJ-45: 10/100/1000Mb Ethernet connector
Female DB-15: VGA connector
Box-header: 2* Serial port (2x5Pin);
1*FDD (2x17Pin); 2* EIDE (2x20Pin);
Pin-header: 1*Parallel port (2x13Pin)
Watchdog System ret or non- maskable interrupt software programmable
time I interval and jumper lectable (64-level)
Operating temperature 0¢X C ~60¢X C
Relative humidity 10%~90% non-condensing at temperature of 40BC or
104BF
1.2 Check
List
Plea check that your package is complete and contains the items below. If you discover damaged or missing items, plea contact your dealer.
SYS7180VE CPU card
Utility CD for SYS7180VE
Installation Guide
IDE cable *2
FDD cable *1
PS/2 1 to 2 adapter *1
Com extension cables with bracket *1
Com, Printer extension cables with bracket *1
+12V power cable *1
USB cable *1¡]Special for SYS7180VE¡
Jumper Short Pin: 6 pcs
1.3 Description
The SYS7180VE is a motherboard bad on Intel 845GV chipt and is fully designed for PC environment. It features socket 478 compatible with Intel’s processor.
This card accommodates up to 2GB of DDR memory.
The SYS7180VE comes with on board CPU temperature nsor to protect your processor from overheating (Winbond W83627HF chipt). Wired for Management (WFM) 2.0 specification compliance.
The SYS7180VE has a LAN connector that us Intel ICH4 integrated with Intel 82562ET (AOL & 10/100) controller.
ps保存图片1.4 Power
Requirements
够级宣点什么意思
Your system requires a clean, steady power source for reliable performance of the high frequency CPU on the SYS7180VE Industrial CPU card, the quality of the power supply is even more important. For the best performance makes sure your power supply provides a range of 4.75 volts minimum to 5.25 volts maximum DC power source.
Power Consumption
For typical configurations, the CPU card is designed to operate with at least a 200W power supply. A higher-wattage power supply should be ud for heavily-loaded configurations. The power supply must meet the following requirements:
Ri time for power supply: 2 ms to 20 ms
Minimum delay for ret to Power Good: 100 ms
Minimum Power down warning: 1 ms
3.3 V output must reach its minimum regulation level within 20ms of the +5V
1.5 Connector & Jumper Location
output reaching its minimum regulation level
The following table lists the power supply’s tolerances for DC voltages:
DC Voltage Acceptable Tolerance
+3.3 V ± 5 %
+5 V ± 5 %
财务三大报表
+5 VSB (standby) ± 5 %
-5 V ± 5 %
+12 V ± 5 %
-12 V ± 5 %
CHAPTER 1 – Introduction
1.6 Block Diagram
PCI TO ISA Bridge W83629D W83629D
GIGA LAN Connector
ICH4
Processor
PWM P I C M G P C I /I S A S L O T
VGA CRT CONNECTOR
SOCKET 478P4 PROCESSOR
AC'97CODEC
CTRL
DATA
IDE Secondary
GMCH
COM1Floppy COM2AC'97 LINK
DDR 266 Mhz
RAID Secondary IDE
IDE Primary
Modules
FirmWare Hub LAN 10/100
家的英语怎么写RJ45-Connector
W83627HF
Audio
Connector
DDR266RS232 /422 /485
DATA
PHY
82562EM安全分
UDMA66/100
USB I/F
CTRL
Keyboard LPC
SUPER-I/O BROOKDALE-G
RAID IDE
CONTROLLER PDC20265R
RAID Primary IDE CLOCK ICS950220
AGTL+ BUS
ADDR
Mou
ADDR USB 2.0PORT 1-6
GIGA LAN CONTROLLER 82540
LPC INTERFACE
Parallel P C I C N T R L + P C I A D D R /D A T A
RS232
FCBGA760
IrDA
CHAPTER 2 –Hardware Installations做四有好老师
Chapter 2 Hardware Installations
This chapter provides information on how to u the jumpers and connectors on
the SYS7180VE in order to t up a workable system.
2.1 Installation procedure
2.1.1 Inrt the system BIOS (if not already installed) genteelly. Pay attention to
the position of pin 1 of BIOS socket.
2.1.2 Install the processor with correct orientation. 2.1.3 Inrt the DRAM module with correct orientation.
2.1.4 Mount the Fan on the top of the processor and connect it to FAN connector. 2.1.5 Inrt all external cables except for flat panel. (Hard disk, floppy, keyboard,
Mou, LAN, etc.) 2.1.6 Prepare a CRT monitor for CMOS tup.
2.1.7 Confirm the power supply is off. 2.1.8 Turn on the power.
Note: The CMOS memory may be in an undefined state at power-on after a period of no
battery backup.
吃什么补肝养肝
