CM,DEAE,Q,SP Sepharo Fast Flow

更新时间:2023-06-20 20:39:00 阅读: 评论:0

GE Healthcare
清炖羊蝎子的做法Instructions 71-5009-64 AE Ion exchange chromatography CM Sepharo Fast Flow
DEAE Sepharo Fast Flow
Q Sepharo Fast Flow
SP Sepharo Fast Flow
CM, DEAE, Q and SP Sepharo™ Fast Flow ion exchangers are part of the range of paration media called BioProcess™ Media. BioProcess Media are developed and supported for process scale chromatography. All media are produced following validated methods and are tested to ensure they meet the performance requirements of industrial manufacturing. Regulatory Support Files contain information to assist process validation and submission to regulatory authorities. BioProcess Media are available for all purification steps from capture to polishing. To ensure best performance and trouble-free operation, plea read the instructions before u.
Table of contents
杭州西湖风景Characteristics of Sepharo Fast Flow ion exchangers 3 Column packing guidelines 10 Evaluating the packing 13 Maintenance 15 Process optimization 17 Troubleshooting guide 18 Ordering information 21
1.Characteristics of Sepharo Fast Flow ion exchangers
The ba matrix of Sepharo Fast Flow ion exchangers is highly cross-linked agaro which gives the ion exchangers high chemical and physical stability. This means that characteristics such as capacity, elution behavior and pressure/flow rate are unaffected by the solutions commonly ud in process chromatography and cleaning procedures, for details e table under each respective ion exchanger. High physical stability gives good flow characteristics and low back pressures. Flow velocities ranging between 300 and 700 cm/h through a bed height of 15 cm at a pressure of 1 bar are typical for the media, e Fig 1. Furthermore, the high rigidity of the matrix minimizes volume variations during change of pH or ionic strength.
Fig 1.  A typical pressure/flow rate curve for Sepharo Fast Flow ion
系带延长手术exchangers.
Characteristics of CM Sepharo Fast Flow长江的诗句
CM Sepharo Fast Flow is a weak cation exchanger. The ion exchange group is a carboxy methyl group, e below.
–O–CH 2COO–
Table 1. Characteristics of CM Sepharo Fast Flow.
* 15 cm bed height, 1 bar, 25°C, XK 50/30 column.
15 cm bed height, 1 bar, 25°C, XK 50/30 column. The titration curve in Figure 2 shows the pH working range of CM Sepharo Fast Flow, i.e. the pH range in which the CM group is charged.
Property
Description Total ionic capacity开普勒22b
0.09–0.13 mmol/ml media Exclusion limit
4 x 106 (globular proteins)Matrix
Cross-linked agaro, 6%Bead form
Spherical, 45–165 µm Flow rate
300–600 cm/h *Working temperature
4–40°C Working pH
See Figure 2.pH stability
2–14 (short-term, CIP) 4–13 (long-term)Chemical stability All commonly ud aqueous buffers 1 M NaOH 8 M urea 6 M guanidine hydrochloride 70% ethanol
The following should be avoided
Oxidizing agents Long exposures (1 week, 20°C) to pH <4
Fig 2. Titration curve of CM Sepharo Fast Flow.
Characteristics of DEAE Sepharo Fast Flow
鸭脚木怎么养
DEAE Sepharo Fast Flow is a weak anion exchanger. The ion exchange group is a diethylaminoethyl group, e below.
–O–CH 2CH 2–N+(C 2H 5)2H
Table 2. Characteristics of DEAE Sepharo Fast Flow.
电脑扫一扫Property
Description Ion exchange type
Weak anion Total ionic capacity
0.11–0.16 mmol/ml media Exclusion limit
4 x 106 (globular proteins)Matrix男人气血不足
Cross-linked agaro, 6%Bead form
Spherical, 45–165 µm

本文发布于:2023-06-20 20:39:00,感谢您对本站的认可!

本文链接:https://www.wtabcd.cn/fanwen/fan/89/1047382.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:风景   系带   清炖   长江   男人   西湖   手术
相关文章
留言与评论(共有 0 条评论)
   
验证码:
推荐文章
排行榜
Copyright ©2019-2022 Comsenz Inc.Powered by © 专利检索| 网站地图