Contents
Ⅰ.Product Overview (1)
1.Introduction (1)
2.Product Sketch (1)
Ⅱ.Main Technical Parameters (2)
1. Crane Specification (2)
2. Engine and machine parameters (2)
时针分针
3. Pump parameters (2)
校庆邀请函Ⅲ.Installation and Adjustment (3)
1. Adjustment of V belt tensity (3)
2. Adjustment of clutch (3)
3. Adjustment of brake (3)
4. Adjustment of right-turn joystick (4)
共工
5. Adjustment of right-turn joystick (4)
6. Adjustment of throttle (4)
7. Adjustment of rubber crawler (4)
Ⅳ. U and Operate Safely (4)
1. Safe precautions (4)
2. Safe warning signs (5)
3. Basic Operation (6)
Ⅴ.Crane Maintenance (10)
1. Running maintenance (10)
2. Lubricating (10)
3. Routine maintenance (11)
4. First technical maintenance (11)
5. Second technical maintenance (12)
6. Track maintenance (12)
Ⅰ.Products Overview 1.Introduction
2.Engine and machine parameters(Table 2)
Modle HONDA GX-390
吊坠绳结的打法图
Displacement389.2ml
ppt图片压缩
Output power 6.6kw
Engine
Ways of deceleration1/2geared
Starting method Motor starting and Recoil Starters
Automotive gasoline/6L
Fule type/Fule tank
capacity
Tank capacity80L
破五是什么意思
Hydraulic（crane
）
L×W×H2850mm×800mm×1450mm
Total weight1800kg
3. Pump Parameters(Table 3)
1. Adjustment of V belt tensity
In order to achieve the adjustment of V belt tensity, you can adjust the tensity of the extension spring, which cloly connected with the braced wheel.
Check whether the tensity of the V belt is appropriate or not, and the length of two V belts should be almost equal, the method is pressing the middle of the belt with four fingers, and the V belts are depresd to15-20mm is appropriate.
2. Adjustment of clutch
You can adjust the nuts connected the clutch cable and handle.
3. Adjustment of brake
You can adjust the nut connected the clutch cable and clutch.
新品上市图片海报
4. Adjustment of left-turn lever
You can adjust the nut connect the left-turn pull and handle.
5. Adjustment of right-turn lever
You can adjust the nut connect the right-turn pull and handle.
6. Adjustment of throttle
再见打一字
The role of the throttle is to adjust the engine speed. Make sure the engine achieve maximum speed, yet make the engine stall. Make sure the tightness of throttle is moderate, and it is difficult to turn the handle if the throttle is too tight, it is unable to stabilize a position if the handle too loo, thus affecting the speed of the engine. Adjust the length of the pull, whirl the throttle handle to the limit position clockwi, relea the nut to adjust the length of pull, tighten the nut after adjust moderately. 7. Adjustment of rubber crawler
Open the outside lid, adjust the bolts inside , e the figure below.
