This is a general recommendation bad on the information you provided. You can customize the connections to suit your individual preferences and viewing habits.
Some hookup recommendations have two cable options listed in the cable ction. You will only need the cables listed under the cable option you choo. You can also u a combination of cables rather than one type throughout.
This hookup guide us generic names for connection jacks and input labels. The table on the right lists some of the label variations you may find on your equipment.
RF IN, RF OUT LINE IN, LINE OUT AUDIO IN, AUDIO OUT MONITOR
UHF/VHF, CABLE, LINE, TV VIDEO FIXED, VARIABLE TO TV, VIDEO IN, VIDEO OUT
If you don’t have a cable box or satellite receiver (AKA t-top box), skip the steps for the ttop box. Connect the coaxial cable from the wall into the RF in connection on the next device. If you’re not connecting a broadcast signal source, disregard the steps involving the t-top box and begin with the steps for the equipment you are connecting.
This guide provides basic instructions for operating your equipment. The steps can vary by brand an
d model. Refer to the manual supplied with your equipment for details specific to your model. Sony product manuals and documentation can found on the Sony eSupport web site. If you have questions about a non-Sony device, plea contact the manufacturer for information.
You can now surf the web with Sony Internet TV products. If you need help connecting to your wired or wireless network, check out our Network Connection tutorial.
© 2010 Sony Electronics Inc. All rights rerved. 1
© 2010 Sony Electronics Inc. All rights rerved.
2
We recommend this hookup to record or view cable or satellite rvice and watch DVDs or DVR recordings on your TV. Your TV must have an HDMI or DVI input and a composite A/V input. The composite A/V cables are required to record to a DVD or the DVR unit as most units will not record through the HDMI connection.
(2) HDMI cables (2) Composite A/V cables
(2) HDMI cables (2) Composite A/V cables (2) Composite audio cables (2) HDMI-to-DVI adapters
1. Connect the coaxial cable from the wall to the RF IN jack on the t-top box.
Note: If your satellite rvice does not include local channels, you may want to connect a to the TV IN jack on your satellite receiver. Refer to the operating instructions for specific information on switching between satellite and local broadcasts.
2. Connect a composite A/V cable to: a. LINE OUT jack on the t-top box b. LINE IN jacks on the DVD recorder or DVR unit
Nobt.e: Be sure to match the colors of the cable connectors with the colors of the jacks.
© 2010 Sony Electronics Inc. All rights rerved.
3
蚊子的习性3. Connect a composite A/V cable to: a. LINE OUT jack on the DVD recorder or DVR unit b. VIDEO input jacks on the TV
Note: If your DVD recorder or DVR unit and TV have S-Video jacks, u this connection instead of the yellow composite cable. The S-Video connection provides a higher-quality video image. Connect the red and white audio cables for the sound.
4. Connect an HDMI cable to: a. HDMI OUT jack on the t-top box b. HDMI IN jack on the TV
Important: If the TV has a DVI jack instead of an HDMI jack, skip step b above and follow the steps below.
c. HDMI IN jack on the HDMI-to-DVI adapter d. Connect a DVI cable to:
i. DVI OUT jack on the HDMI-to-DVI adapter ii. DVI IN jack on the TV e. Connect a composite audio cable to: i. AUDIO OUT jacks on the t-top box ii. AUDIO IN jacks located next to or near the DVI jack on the TV 5. Connect an HDMI cable to: a. HDMI OUT jack on the DVR unit or DVD recorder b. HDMI IN jack on the TV
喝枸杞水Important: If the TV has a DVI jack instead of an HDMI jack, skip step b above and follow the steps below.
c. HDMI IN jack on the HDMI-to-DVI adapter d. Connect a DVI cable to:
i. DVI OUT jack on the HDMI-to-DVI adapter ii. DVI IN jack on the TV e. Connect a composite audio cable to: i. AUDIO OUT jacks on the t-top box ii. AUDIO IN jacks located next to or near the DVI jack on the TV
Note: If your TV has only one HDMI or DVI jack, connect one of your devices to the TV using a component (Y/Pb/Pr) video cable and a composite audio cable.
© 2010 Sony Electronics Inc. All rights rerved.
4
1. Turn on the TV and the t-top box. 2. Tune the TV to the HDMI or DVI input to which the t-top box is connected, for example
VIDEO 6.
If there is picture and sound on the TV, you have connected your equipment correctly.
3. Turn on the DVD recorder or DVR unit. 4. Tune the TV to the composite video input to which the DVD recorder or DVR unit is
connected, for example, VIDEO 1.
If there is picture and sound on the TV, you have connected your equipment correctly.
5. Tune the TV to the HDMI or component video input to which the DVD recorder or DVR unit is connected, for example, VIDEO 5.秦妇吟
小标题作文格式6. Inrt a DVD into the DVD recorder or lect a program on the DVR. 7. Press the Play button on the DVD recorder or DVR unit remote control.
If there is picture and sound on the TV, you have connected your equipment correctly.
Note: If you are connecting a DVR unit and do not have any recordings, you will e the DVR splash screen on the TV. Once you have recorded content to the DVR, repeat steps 6-8 to verify you have connected the unit with the HDMI cable correctly.
假如我有一支神笔Watch TV
1. Turn on the TV and the t-top box. 2. Tune the TV to the HDMI or DVI input to which the t-top box is connected, for example
武隆仙女山门票VIDEO 6. 3. Tune the t-top box to the desired channel.
Watch a DVD or DVR recording
1. Turn on the TV. 2. Turn on the DVD recorder or DVR unit. 3. Tune the TV to the HDMI or component video input to which the DVD recorder or DVR
unit is connected, for example, VIDEO 5. 4. Inrt the DVD you want to watch into the DVD recorder or u the DVR unit remote
control to lect the program you want to watch. 5. Press the Play button on the DVD recorder or DVR unit remote control.
Record from the t-top box
1. Turn on the TV. 2. Turn on the t-top box. 3. Turn on the DVD recorder or DVR unit. 4. Select the line input on the DVD recorder or DVR unit to which the t-top box is
钱时connected, for example L1. 5. Tune the TV to the composite video input to which the DVD recorder or DVR unit is
connected, for example VIDEO 1. 6. If recording on a DVD, inrt a blank recordable DVD disc into the DVD recorder. 7. Tune the t-top box to the desired channel. 8. Press the Record button on the DVD recorder or DVR unit remote control.
© 2010 Sony Electronics Inc. All rights rerved.
5
>快乐麦肯
