Konzernnorm Descriptors: Belt, Seat Belt, 3-Point Belt, Lap Belt
Vertragspartner erhalten die Norm nur über die zuständige Beschaffungsabteilung.
Confidential. All rights rerved. No part of this document may be transmitted or reproduced without the prior written permission of the Volkswagen Group, EZTN, Standard Department.
Parties to a contract can only obtain this standard via the responsible procurement department.
祖国简笔画VOLKSWAGEN AG
F o r m F E 41 - 10.99
T h e E n g l i s h t r a n s l a t i o n i s b e l i e v e d t o b e a c c u r a t e . I n c a s e o f d i s c r e p a n c i e s t h e G e r m a n v e r s i o n s h a l l g o v e r n .
Q U E L L E : N O L I S (N o r m v o r A n w e n d u n g a u f A k t u a l i t ät p r üf e n !)
Page 2
TL 524 54: 2000-04
D
2.2.2 TL 524 54, Type A
U: e.g., 3-point belt; piece dyed: color per original sample; rounded edge with monofilament weft thread; calendered, with post-treatment (chemical softening agent).
2.2.3 TL 524 54, Type B
U: e.g., lap belt (automatic at belt winder); piece dyed: color per original sample; without rounded edge, without monofilament weft thread, without post-treatment (chemical softening agent); thin design.
椰子汤
2.2.4 TL 524 54, Type C
U: e.g., lap belt (static, no automatic at belt winder); piece dyed: color per original sample; rounded edge with monofilament weft thread; not calendered; without post-treatment (chemical softening agent).
2.2.5 TL 524 54, Type D
U: e.g., 3-point belt; piece dyed: color per original sample; rounded edge with monofilament weft thread; calendered, without post-treatment (chemical softening agent).
2.2.6 TL 524 54, Type E
U: e.g., 3-point belt with at-belt tensioner and force limitation; spin dyed: black; rounded edge; thin design.
2.2.7 TL 524 54, Type F
U: e.g., 3-point belt with at-belt tensioner and force limitation; piece dyed: color per original sample; rounded edge; with post-treatment; thin design
傅斯年Code
2.3 Material
PET
2.4 Designation
Example of designation for a calendered belt for 3-point belt
PET, TL 524 54-D
2.5 Validity of Requirements
The specified numerical values apply for each individual measurement.
2.6 Conditioning
Prior to testing, the specimens must be conditioned for at least 24 h at (23 ± 2)° C and 63 +4-3 % relative humidity.
The specimens per Table 1, Nos. 7 and 8 must also be conditioned as described above after they have been expod to the respective stress.
Page 3
TL 524 54: 2000-04
D
2.7 Material
Material requirements, e Table 1.
Table 1: Material requirements
Page 4独立国家联合体
TL 524 54: 2000-04 D
Page 5
TL 524 54: 2000-04
D
14Flexural rigidity per PV 3903
(specimen size 20 x belt width)
Cross stiffness n, as-received condition
Type without index, A
Warp0.5 to 1.2
Weft 1.5 to 2.5
Type B, C, D, E, F
Warp0.5 to 1.2
Weft 1.5 to 2.5
3 Notes on Testing
Strength
酒店管理制度
3.1 Tear
According to US Regulation 571.209, Section S 5.1 (b) and ECE Regulation No. 16, Section 7.4.2.
3.2 Elongation
一直近义词According to US Regulation 571.209, Section S 5.1 (c).
3.3 Abrasion
According to US Regulation 571.209, Section S 5.1 (d).
Light标准化设计
3.4 Carbon
According to US Regulation 571.209, Section S 5.1 (e) and ASTM G 23-93.
3.5 High-Temperature Light Exposure
According to ECE Regulation No. 16, Section 7.4.1.2, Maximum Tensile Force after Exposure to Xenon Arc Radiation per EN ISO 105-B02. The belt must be expod to the light until the blue scale level has changed to such an extent that it corresponds to the contrast of the gray scale level 4 per EN 20 105-A02. This effect is achieved after 2 periods of high-temperature light exposure per PV 1303.
Aging
3.6 Heat
The at belt is affixed in the mechanical circulation oven hanging freely using thread from the same material as the belt.
Aging
3.7 Low-Temperature
According to ECE Regulation No. 16, Section 7.4.1.3.
婴儿散光3.8 Aging in Water
According to ECE Regulation No. 16, Section 7.4.1.5.
