OPERATING MANUAL Peltier Controlled Fluid Circulator (P/N: 7910029600)
Table of Contents松蛾
1. GENERAL INFORMATION 2
1.1 General warnings 2
宫颈炎用什么药好得快
1.2 Quality, reliability and safety 3
1.3 Safety markings 3
2. INSTRUMENT DESCRIPTION 4
2.1 Instrument description 4
2.2 PCB-1500 front and rear panel 5
2.3 Specifications 5
2.4 Ur interface 7
3. INSTALLATION 8
3.1 Checking the rial number 8
3.2 Checking main supply and fus 8
3.3 Instrument t-up 9
4. OPERATING INSTRUCTIONS 11
4.1 Manual operation 11
5. MAINTENANCE 13
5.1 Cleaning the instruments 13
5.2 Water level alarm 13
6. TROUBLESHOOTING
6.1 Audible alarm 14
1. GENERAL INFORMATION
1.1. General Warnings
Check the voltage lector
Always disconnect the mains plug before starting any work
inside the instrument
Set the temperature to the
required values on power on
If using substances dangerous for health and
the environment, obrve the laws and
the standards in force in the laboratory where this instrument is ud If using flammable or explosive substances take the necessary
precautions
Quality, Reliability and Safety
This equipment has been designed with emphasis on QUALITY, RELIABILITY and SAFETY, and we will accept responsibility for the aspects only if the following conditions are met:
a) Electrical installation of the room or building in which the equipment is to be ud
must comply with regulations specified in the country where the equipment is to be
ud.
b) The equipment must be ud in accordance with the instructions for u provided
艾滋病日
by DBS.
c) All modifications and repairs to the equipment must be carried out by DBS or its
authorid Agents.
本学期
d) Modifications must not be carried out unless they conform to approved
Engineering Service Information issued according to the appropriate DBS
procedure.
e) The equipment installation must be carried out in accordance with local
requirements for responsibility and warranty.内蒙古继续教育网
1.3. Safety makings
CE mark
The "CE" mark for this product makes reference to the directives
• 89/336/EEC amended by 93/68/EEC for electromagnetic compatibility
• 73123/EEC amended by 93/68/EEC for low voltage
COPYRIGHT All rights rerved. The information contained in this publication
may not be ud for any purpo other that for which it was
originally supplied. The publication may not be reproduced in part
小鱼的尾巴像什么
or in whole without written connt of DBS. In order to maintain
and improve standards of manufacturing, methods of functioning
小儿抗感颗粒and to increa reliability, DBS equipment is periodically reviewed.
For this reason, the contents of this publication are subject to change
without notice. The equipment described is designed and
manufactured by DBS.
2. INSTRUMENT DESCRIPTION
2.1. Instrument description
The PCB-1500 is a Peltier effect thermostatting system using an internal aled liquid circuit allowing full compatibility and connection to all thermostattable accessories.
声音描写The Peltier effect is bad on the reverd thermoelectric effect. This is a phenomenon in which a temperature difference is caud by a flow of current through a clod circuit consisting of two differe
nt metals.
The PCB-1500 provides temperatures ranging from 20 °C to 60 °C with ±1 °C stability and ±0.1 °C repeatability. The features of the PCB-1500 include:
•Peltier effect for heating and cooling the liquid of circulation
•Internal flow pump to circulate the liquid
•The PCB-1500 can operate in either manual or remote control via a USB port
•The PCB-1500 is supplied with one t of thermally insulated connection tubes to connect the PCB-1500 to any thermostattable accessory
•The PCB-1500 is supplied with a water level nsor to ensure correct operation
•The PCB-1500 is supplied with high temperature nsor to avoid damaging the system and malfunctions
