WP Series Welding Positioner
Welding positioner is a universal and efficient welding equipment that mainly realizes circular am welding. The welding positioner can be equipped with welding power: such as argon arc welding 唐小雨power (wired or not filled), molten gas shielded welding power (C02/MAG/MIG welding machine), plasma welding power, flame or plasma cutting torches etc., and can be combined with other auxiliary machinery校长寄语,克己奉公的意思 Such as welding manipulators, robots... etc. constitute an automatic welding system.
1、WP ries welding positioner
HBZ ries welding positioner is compod of worktable吉他独奏谱 revolving system, worktable overturning mechanism, welding current conductive device and electric control system, etc. This type machine is mainly ud for automate welding round tubes and flange plates and many other special products etc .
员工绩效考核管理办法1.1: Worktable and revolving system
There are many shapes worktable: round, square, rectangle, polygon ... etc. Generally we u round worktable. If you need other
shapes table, we can special making according to the products.
The rotation of the worktable us an AC motor to drive the gear reducer, and then drives the rotation of the worktable. The worktable rotation speed can be adjusted by the imported AC inverter.The table have Forward、Rever and Stop functions. The table revolving speed is showed on the digital display screen.
1.2: Worktable overturning system
The overturning of the worktable us an AC brake motor drive worm gear reducer and gear with half gear. The overturning angle can be displayed by the angle dial on the side. The limit switch can ensure that when the worktable is in the horizontal position or the maximum turning limit position, the motor is powered off and the turning stops.
1.3: Welding current conductive device
The welding current conductive device is mainly ud to transport the welding current into the earth to avoid damage to the bearing of the equipment. For better conductivity, customers can choo to connect the cable to a metal rod which inrted into the ground. Current conductive device generally installed tightly at the bottom of the worktable.
1.4: Electric control system
The electrical control is mainly ud to control the overturning and rotation of the positioner. According to the needs of work, the foot switch function can also be added.
The convenience and safety of electrical control are the core part of the equipment. We u well-known brand electrical components with international safety CE standards. Such as: Schneider,Siemens and ABB etc. A fan is installed on the side of the electrical box, w
hich can effectively cool down and dissipate heat. Two emergency stop switches are installed on the electrical box and the hand control box to cut off all control functions and ensure safe production. According to the needs of customers, you can choo a wireless remote control box.
The control lines such as foot switch and remote control box are all connected by aviation plugs to the electrical box.
The positioner have the functions: worktable OVERTURNI UP/OVERTURN DOWN , worktable revolving FORWARD/REVERSE. Worktable revolving speed can be adjusted by Schneider frequency converter. The worktable revolving speed is showed on the digital display screen.
2、Technical Parameters
●Dates： (e drawings)
●Revolving speed adjust：VFD
●Controller：wire remote manual box
●Input power：3P 380V 50Hz
●Painting：RAL5020 Ocean Blue
●Optional: Wireless control、Foot switch、 etc
3、Products supply range and components
权志龙图片
Frame asmbly: working table, slewing mechanism, overturning mechanism.
electrical control system: electrical box, digital display device, converter, manual control operation box and its accessories
spare parts: three units 2A melt cores and one piece of documentation
4、Technical document
有关重阳节的诗句◆Operation manual乞巧的意思是什么 (electrical principle drawing，certification included)
◆Bill of loading, commercial invoice and packing list
