陶瓷生产流程 英文版 外贸陶瓷必看！！
以下以贴花和手绘，分别介绍釉上彩和釉下彩的工艺流程：
第一种；Decaled Dinnerware
1.Milling 练泥
Various raw materials including feldspar, silica, clay and pottery stone are mixed and fine-milled in the ball mill.
2.Filter press & Vacuum extrusion 摞泥
The clay body is made by filter-pressing the slip. The presd body de-aired and extruded to the required size through the pug mill.豪字组词
3.Green Making 制坯
Using appropriated roller head and plaster mould, green body is formed. For the irregular s
hapes such as teapots and figurines, slip casting is ud. In casting, liquid clay (slip) is poured into plaster moulds and the green shape forms on the mould as the water is absorbed through the plaster mould.
4.Finishing 修坯
The rough edges and foot of the green ware are cleaned with wet sponge by automatic edge-cleaning machine or by skilled hand
5.Glazing 上釉
To al the surface of the biscuit body and to give the product its glossy finish, glaze is applied using automatic glaze spraying line.
6.Glost firing 烧釉
Carefully loading the glazed ware onto a kiln car, the glazed ware is fired at 1280∑ C. At t
he temperature, the glaze powder melts and turns into a transparent glass layer covering the biscuit body. The glost-fired ware is inspected and ready for the decoration.
东北春节习俗7.Lithography 贴花
The printed decal is transferred onto the glost ware and dried.
含笑花
8.Decoration firing 二次烧结
The decal and the ware are fired at appropriated temperatures and the printed patterns permanently fu onto the glaze layer to give permanent durable decoration.
央视主持人大赛9.Inspeciton & Packaging 修整 成箱
Experienced eyes in the inspection area checks for possible faults in the ware and the finished ware is packaged as necessary
第二种：Handpainted Dinnerware
走进西部>医疗机构聘用证明
1.Milling 练泥
Various raw materials including feldspar, silica, clay and pottery stone are mixed and fine-milled in the ball mill.
2.Filter press & Vacuum extrusion 摞泥
The clay body is made by filter-pressing the slip. The presd body de-aired and extruded to the required size through the pug mill.
3.Green Making 制坯
南方大学排名Using appropriated roller head and plaster mould, green body is formed. For the irregular shapes such as teapots and figurines, slip casting is ud. In casting, liquid clay (slip) is poured into plaster moulds and the green shape forms on the mould as the water is absorbed through the plaster mould.
4.Finishing 修坯
The rough edges and foot of the green ware are cleaned with wet sponge by automatic edge-cleaning machine or by skilled hand
5.Handpainting 手绘
The picture is drawn or painted by hands,then dried.
6.Glazing 上釉五月婷婷丁香
To al the surface of the biscuit body and to give the product its glossy finish, glaze is applied using automatic glaze spraying line.
7.Glost firing 烧釉
Carefully loading the glazed ware onto a kiln car, the glazed ware is fired once again at 1280∑ C. At the temperature, the glaze powder melts and turns into a transparent glass layer covering the biscuit body. The glost-fired ware is inspected and ready for the decora
tion.
8.Inspeciton & Packaging 修整 成箱
Experienced eyes in the inspection area checks for possible faults in the ware and the finished ware is packaged as necessary
