启星搅拌磨
Venus bead mill
单刀赴会
洛阳启星技术开发有限公司Luoyang Venuspowder Co.,LTD
搅拌磨碎机高性能的原理
采用搅拌盘或搅拌棒，使磨介球产生离心力，旋转力及上下运动，磨介球的冲撞使其没搅拌棒或搅拌盘的旋转方向移动速度低，这将引起磨介球的冲撞与旋转，其运动量使磨介中间的物料粉碎，达到高效粉碎，粉碎靠冲击、剪切、压缩、磨擦的作用或其复合作用。特别是剪切和磨擦的复合作用产生的磨碎可以非常有效的将物料粉碎成超细粉。因此具有高粉碎能力和高能量利用率以及可能获得粒度分布窄的产品在粉碎过程中同时进行分、兼具有高分散性。
Principle of high performance stirring mill U stirring disk or stirring rod to make the grinding balls generating centrifugal force, rotary force and pump motion, the impaction of grinding balls made their speed lower along the rotary direction of stirring rod or stirring bar this will cau impaction and rotation of grinding balls, the motion crush up the materials in the middle of grinding balls so that achieved high effective crushing by the action of impaction, shear, compression and friction or their combined action. Especially the grinding force that generated by the combined action of shear and friction could grind materials into ultra fine powder effectively, so that the mill has grinding capability and high-energy availability ratio, can obtain products with narrow particle size distribution, dispersion at the same time during grinding and has high dispersancy.
搅拌磨原理图
带符号的名字
搅拌装置结构Structure of stirring unit
MJG卧式高速干法搅拌磨
具有粉碎能力强粉碎速度大的特长。粒度的控制可能使用球填充量的调整，转速的变更以及变化处理量来进行。球通常使用5-10mm的钢球和陶瓷（氧化铝、氧化锆、氮化硅、碳化硅等），根据用途进行选择。球的填充量按粉碎容器有效容积50-80%的范围使用。粉碎容器是附带水套的水冷结构，可以控制产品的温度。材质虽然通常是不锈钢，但是在有污染问题时，使用了耐磨损材料（超硬等）的内衬和氧化铝、氮化硅、碳化硅等陶瓷材料。1）可以超微米粉碎，粒径达d50=0.3-0.8μm，粒度分布窄.2)容易规模扩大化.3)非常好的械化学性.4)不需要分级机.5)容易控制粒度和粒度分布.用于陶瓷的粉碎(高纯度氧化铝、电解氧化铝、钛酸钡、PZT、氮化硅等超微粉碎)，对铁素体和氧化铁的1μm程度粉碎，对矿石类的大量的微粉碎，在干式粉碎处理方面发挥了威力。在陶瓷的粉碎处理上作为无污染型使用粉碎部分全部氧化铝、超硬材料或其他陶瓷制材料。
MJG horizontal high speed dry stirring mill Has the characteristic of high grinding capability and high grinding speed. Adjust the filling quantity of grinding balls, rotary speed and processing quantity to control the particle size. The grinding balls generally ud are steel and ceramic balls (alumina, zirconia, silicon nitride and c-arborundum) with a diameter of 5-10mm according to the purpos. The filling quantity of balls is 50-80% of the volume of grinding chamber. The grinding chamber is equipped with a water cool sleeve so as to control the temperature of products. The material generally ud is stainless steel, but if it is needed we will u liners with abrasion resistance and ceramic materials such as (alumina, silicon nitride and carborundum to avoid iron pollution. 1)achieved ultra micron grinding, the particle size up to d50=0.3-0.8micron and particle size distribution is narrow; 2)the dimensions can be enlarged easily; 3)excellent; 4)no need of classifier; 5)particle size and particle size distribution can be easily controlled. Ud for crushing of ceramics (ultra micron crushing of high-pure alumina, electrolytic alumina, barium titanium, PZT, silicon nitride), 1micron crushing of ferrite and ferric oxide, large volume crushing of ores. This mill exerted big power in dry milling. In crushing of ceramics this mill is ud as a nonpolluting type to crush alumina, ultra hard materials and other ceramics.
名人传读书笔记
陶瓷搅拌机构
性能参数表
型号Type 筒体直径/mm
Drum dia
筒体长度/mm
Drum
容器容量/L
Volume
电机容量/kw执行策划
Motor
重量/kg
Weight
月完念什么MJG-10
200 460 10 5.5-11
490 MJG-15
240 540 15 7.5-15
600 MJG-35
300 700 35 15-300
1300 MJG-50
355 800 50 22-37
1500 MJG-100 415 1000 100 37-55 2620
MJG-250 580 1350 250 75-110 5800
MJG-500 740 1700 500 110-220 8100
MJG-750 835 1920 750 160-315 9000
MJG-1000 950 2180 1000 200-400 10500
MJG-2000
1150 2650 2000
400-800
12000 MJG-3000庐山自驾游
1300 3000 3000
630-1250
13500 MJG-5000
1580 3650 5000
800-1600
15000 MJG-7000
1760 4000 7000
1250-2500
17500 MJG-10000
2000 4700 10000
1600-3150
20000 MJG-15000
2350 5200 15000
3150-6300
25000 MJG-25000
2700 6000 25000
3750-7100龙舟图片大全
30000
>临安旅游
