Page 1/4工作座右铭励志简短
Pressure
Cavity Pressure Sensor
with Front ø1 mm
6183A _000-038e -12.11
©2002 ... 2011, Kistler Group, Eulachstras 22, 8408 Winterthur, Switzerland Tel.+41522241111,Fax+41522241414,****************, This information corresponds to the current state of knowledge. Kistler rerves the right to make technical changes. Liability for conquential damage resulting
Miniaturized piezoelectric nsor with single-wire technol-ogy for mold cavity pressures up to 2000 bar in the injection molding of plastics.• Ideally suited for industrial applications • D esigned without a diaphragm and with a level, machinable front face •
A lso available with chromed face for abrasive plastics
Description
The miniaturized nsor for mold cavity pressure Type 6183AE has a 1 mm diameter front face. The very small crossctional area of the single-wire cable allows flexibility of installation. Shielding in the single-wire technology is provided by the mold. It is therefore esntial for the cable and connector to be integrated in the mold.
For multi cavity applications the nsor is ud without the single-wire connector Type 1839. The Multi Cavity Set and the Multi Sensor System are described in the appropriate data sheets.
The pressure acts over the entire front of the nsor and is transmitted to the measuring element, which produces a pro-portional electric charge (pC = Picocoloumb). This is c onverted into a voltage 0 ... 10 V in the amplifier and is then available as an amplifier output.
Application
It is mainly suitable for industrial applications for monitoring and open-looped and clod-looped control in thermoplastic
injection molding.
Technical Data
Range bar 0 ... 2000Overload bar 2500Sensitivity pC/bar ≈2,5Linearity, all ranges % FSO ≤±1Operating temperature range Mold (Sensor, cable, connector) ˚C 0 ... 200*
Melt (on nsor front face) ˚C <450Insulation resistance at 20 ˚C TΩ >10 at 200 ˚C TΩ >1* During machine down-time, the mold temperature may be allowed to ri to 240 ˚C without damaging the s
ensor. However, measuring errors may occur
Page 2/4
6183A _000-038e -12.11
©2002 ... 2011, Kistler Group, Eulachstras 22, 8408 Winterthur, Switzerland Tel.+41522241111,Fax+41522241414,****************, This information corresponds to the current state of knowledge. Kistler rerves the right to make technical changes. Liability for conquential damage resulting Cable and Amplifier for Measuring Chain with Sensor
Fig. 2: Sensor with Monitoring System CoMo Injection
4-channel cable to connector Type 1708A.. 8-channel cable on connector Type 2869A0xx
Type 2869A2xx/2869B2xx Type 2869A1xx/2869B1xx
Type 2869B3xx
Fig. 1: Sensor with Charge Amplifier or Signal Conditioner Type
Cable (BNC connector) Cable Type (TNC connector) Type 5039Axx2 Type 5039Axx1 Type 5049Axx2
Type 5049Axx1
Type 5155Axx2x/Axx4x/Axx8x
Type 5155Axx1x/Axx3x/Axx7x
Type 5063A1 in //
Page 3/4
6183A _000-038e -12.11
©2002 ... 2011, Kistler Group, Eulachstras 22, 8408 Winterthur, Switzerland Tel.+41522241111,Fax+41522241414,****************, This information corresponds t
o the current state of knowledge. Kistler rerves the right to make technical changes. Liability for conquential damage resulting
Installation Examples
Fig. 3: Installation with spacer sleeve
Fig. 4: Sensor, cable, mounting plate and identification plate陈飞宇个人资料
房屋出租怎么写Fig. 5: Connector Type 1839Fig. 6: Mounting plate (Mat. No. 65005208)
* adjust dimension
Page 4/4
6183A _000-038e -12.11
©2002 ... 2011, Kistler Group, Eulachstras 22, 8408 Winterthur, Switzerland Tel.+41522241111,Fax+41522241414,****************, This information corresponds to the current state of knowledge. Kistler rerves the right to make technical changes. Liability for conquential damage resulting Accessories Included
Mat. No./Type • Spacer sleeve (L = 50 mm) 6464A1• Mounting plate
65005208• Connector (with cap) 1839
• Checking tool
65000144• Identification plate 65005416
Optional Accessories Mat. No./Type • Dummy nsor 6579• Extraction tool 1358A • Mounting nut
春晓的作者是6458• 4-channel connector for 1708A0Type 6183AG and ACG • 8-channel connector for 1710A0
Type 6183AG and ACG • Contact elements 1 channel 1712A0• Contact elements 4 channels 1714A0• Crimped pin
65003747• Crimpt with tools
产品检验1381A0
Installation
The nsor is preferably fitted in the mounting bore with the spacer sleeve (Type 6464A1). The front face of the nsor forms part of the cavity wall. The nsor must therefore be installed in such a way that its front face is exactly flush with the wall.
The nsor front face of all unchromed nsors can be ma-chined up to 0,5 mm.
The nsor front of may not be machined.The single-wire cable must be installed c
ompletely in the mold. The connector supplied must be installed with the single-wire cable cut to length. The insulation of the cable must not be stripped prior to inrtion into the connector. This connector is fitted in the mounting plate and this cured in a recess in the mold. The identification plate should be fixed nearby, indicat-ing the type of nsor and its nsitivity.
Standard nsor with single-wire cable E Length 1,5 m and connector Sensor with single-wire-cable
凉拌白菜丝
CE chromed front, length = 1,5m, connector Sensor Type 6183AE without connector G Sensor Type 6183ACE without CG
connector
欲女关系For contact elements 白色玫瑰花语
Sensor with single-wire cable and Zsp
crimped pin (Mat. No. 65003747). Cable with special length. Specify cable length l in m. L min = 0,04 m/L max = 1,5 m
Sensor with chromed face, single-wire
CZsp
cable and crimped pin (Mat. No. 65003747). Cable with special length. Specify cable length l in m.
L min = 0,04 m/L max = 1,5 m
Ordering Key
