PD-97288 RevA
IRAM136-3063B
早孕期
Series 30A, 600V
Integrated Power Hybrid IC for Low Voltage Motor Applications
with Internal Shunt Resistor
Description
International Rectifier's IRAM136-3063B is a 30A, 600V Integrated Power Hybrid IC with Internal Shunt Resistor for Appliance Motor Drives applications such air conditioning systems and compressor drivers as well as for light industrial application. IR's technology offers an extremely compact, high performanc
e AC motor driver in a single isolated package to simplify design.
This advanced HIC is a combination of IR's low V CE(on) Punch-Through IGBT technology and the industry benchmark 3-Pha high voltage, high speed driver in a fully isolated thermally enhanced package. A built-in temperature monitor and over-current and over-temperature protections, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and failsafe operation. Using a new developed single in line package (SiP3) with heat spreader for the power die along with full transfer mold structure minimizes PCB space and resolves isolation problems to heatsink.
Features
• Integrated Gate Drivers
• Temperature Monitor and Protection • Overcurrent shutdown
• Low V CE(on) Advance Planar Super Rugged Technology • Undervoltage lockout for all channels
• Matched propagation delay for all channels • 5V Schmitt-triggered input logic • Cross-conduction prevention logic
• Lower di/dt gate driver for better noi immunity • Motor Power up to 3.3kW / 85~253 Vdc
• Fully Isolated Package, Isolation 2000V RMS min
J PWM Note 2: t P <100ms; T C =25°C; F PWM =6kHz. Limited by I BUS-ITRIP , e Table "Inverter Section Electrical Characteristics"高中毕业鉴定
户型图cad
中华的由来
1
IRAM136-3063B
Internal Electrical Schematic – IRAM136-3063B
V -
(12)
VB1 (1)U, VS1 (2)VB2 (4)V, VS2 (5)VB3 (7)W, VS3 (8)
怎么看电脑内存VDD (21)
VSS (22)
I SENSE (20)V (10)
儿童故事下载+
FAULT(19)HIN1 (13)HIN2 (14)HIN3 (15)LIN1 (16)LIN2 (17)LIN3 (18)2
师夷之长技以制夷IRAM136-3063B
3
IRAM136-3063B
天蝎男处女女Recommended Operating Conditions Driver Function
The Input/Output logic timing diagram is shown in Figure 1. For proper operation the device should be ud within the recommended conditions. All voltages are absolute referenced to COM. The V S offt is tested with all supplies biad at 15V differential
Note 4: Logic operational for V s from COM-5V to COM+600V. Logic state held for V s from COM-5V to COM-V BS . (plea refer to DT97-3 for more details)
4
IRAM136-3063B
Static Electrical Characteristics Driver Function
V BIAS (V CC , V BS1,2,3)=15V, unless otherwi specified. The V IN and I IN
parameters are referenced to COM/I TRIP and are
Dynamic Electrical Characteristics
Driver only timing unless otherwi specified.)
5
