Thermostatic Heater Illustration
中国好看的电影
I. Item description:
∙Adopted by original Yudian Automation PDI economic type temperature controller, its high-accuracy, operation is safe, simple, clear and convenience.
∙Adopted by original high-quality AC solid-state relay, long lasting as 100 times of the common contact relay.
∙Adopted by multiple high-quality metal heating pipes, maintenance is convenience and low failure-rate.
∙The aluminum top surface is high thermal conductivity, heat fast and evenly.
干热灭菌∙The whole ca is made by high-quality SUS304 stainless to ensure it against from rusted and peeling off in the usual condition.
II. Specfation
Power Supply: 220V (50HZ);Controllable Temperature Range: Basic Type (Ordinary Temperature～350℃); Elevated Temperature Type( Ordinary Temperature～450℃), Ultra Temperature Type (Ordinary Temperature～500℃), Each type of the item has Unitary Type (Model A), Splitting Type (Model B) and Guardrail Type ( Model C).
III. Application filed
∙Electronic industrial bonding aling and application heating.
∙LED industrial aluminum ba welding and maintenance
∙mold core pre-heating
∙Esntial equipment at the laboratory in various industrials such as biology, genetics, medicine and environment etc.读后感该怎么写
IV. Application Instruction
拉萨在哪里∙Plug in the power and turn on the POWER switch while the RED indicator light constant light, its means the device has being powered.
∙Turn on the HEATING switch and the device is starting then, GREEN indicator light constant light, it’s means the device is heating up; sparkling means it has been into the constant temperature while workstation is being recycle heating up.
∙Once it finish using, plea turn off the HEATING switch first and the device will be stopped heating, while the RED indicator light are still constant light in order to
reminding the device are still working and plea don’t touch the work surface. Wait for the work surface being cool down (suggesting after an hour) and torn off the
POWER switch then.
V. Attention:
∙Voltage must be 220V, plea u the 3 pole socket which is connect to the earth and with anticreeping switch as well.
∙Plea don’t open the ca or switch any wire position unless you are the specific operation.
∙Hand touch is prohibited in ca to avoid burn.
∙Plea unplug the power supply when the people away or device has being long term idle.
∙Plea keep the vent hole clean since the device has been cooperated with fan cooler,
∙Plea make sure it has unplugged from the power source when the fu needs to be replaced for safety.
VII. Parameter Setting
●Set value tting: Press the key ∧，∨，＜to modify the control value which is
showing at the display window under the default situation, press the key ∨ for value reducing, press the key ∧ for value increasing, the dot sparkly with the number which position switched( sparkly like cursor). Press down for quick increa / reduce value, and the value will be speed up while the position of the dot rightward switch. Press the key ＜to move and modify the position of the value (cursor). Press the key ∧ or ∨ to modify the value which is sparkly, control convenience.
●Automatic adjustable (AT) operation, available with Automatic (AT) operating to
confirm the PID adjustable parameter when u AI agronomical PID control. The AT parameter shows up after press the key ＜at 2 conds under the default situation.
Press the key ∧ to modify the OFF to ON which is shown at the bottom display
window, the Automatic Adjustable operation will be start by press the key “O” to
confirm. At the same time, the letter “AT” will be sparking at the display window which is at the bottom of instrument panel, the result of the suitable PID parameter for the current condition will be counted automatically by the local micro CPU of the
梆组词instrument panel, and it will be exterminated automatically from the AT operating.
Press the key ＜at another 2 conds to switch up the AT parameter from ON to OFF and confirmed by press the key “0” to give up the AT operating. (Remarks: The system parameter value are totally different within the different t value, SV value
modify are prohibited while the AT operating in process. The control result might be not the best once the AT operation finished, it will be got the best result after u in a while
Nonstandard specification is available to booking with 5~7 working days lead-time
VIII, Guarantee
●12 months guaranteed for the complete device (6 months for heating pipe) beyond
human control.
●Lifetime beneficial rvice after guarantee.
Note:
●Plea make sure the connector plug is plug in fastened, no shaking movement,
otherwi the power socket will be burned by the spark.
鼻子怎么画●The temperature might be 3-5 degrees higher than the tting number and it will
八月加油
be back to it after few minutes, this feature could be increa the uniformity of
祝你平安图片
heating panel temperature.
●Since the heating panel is machined goods, there has some machine oil left at
the screw hole and it would be some smoke with smell comes up after burning by
the high temperature, this is normal phenomenon and will be disappeared after a
period.
●Plea ignore the noi when this equipment running, it’s becau of g rating that
the heating pipe rubs against with panel during the situation of substances
expand when heated and contract when cooled.
●There are 2 fus inside the equipment to ensure the safety.
●It has been took 24 hours for burn-in test before out-going of the factory, plea
don’t change the default parameter without authorized，otherwi our
association will take no responsibility and liability.
