Line Blanks A N A M E R I C A N N A T I O N A L S T A N D A R D
雪梨Line Blanks
A N A M E R I C A N N A T I O N A L S T A N D A R D
Three Park Avenue • New York, NY 10016
Date of Issuance:January16,2006
The next edition of this Standard is scheduled for publication in2010.There will be no addenda or written interpretations of the requirements of this Standard issued to this edition.
ASME is the registered trademark of The American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited as meeting the criteria for America
n National Standards.The Standards Committee that approved the code or standard was balanced to ensure that individuals from competent and concerned interests have had an opportunity to participate.The propod code or standard was made available for public review and comment that provides an opportunity for additional public input from industry,academia, regulatory agencies,and the public-at-large.
ASME does not“approve,”“rate,”or“endor”any item,construction,proprietary device,or activity.
ASME does not take any position with respect to the validity of any patent rights asrted in connection with any items mentioned in this document and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent,nor assume any such liability.Urs of a code or standard are expressly advid that determination of the validity of any such patent rights,and the risk of infringement of such rights,is entirely their own responsibility.
Participation by federal agency reprentative(s)or person(s)affiliated with industry is not to be interpreted as government or industry endorment of this code or standard.
ASME accepts responsibility for only tho interpretations of this document issued in accordance with the established ASME procedures and policies,which precludes the issuance of interpretations
by individuals.
No part of this document may be reproduced in any form,
in an electronic retrieval system or otherwi,
without the prior written permission of the publisher.
The American Society of Mechanical Engineers
Three Park Avenue,New York,NY10016-5990
Copyright©2006by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
老夫子圣诞老人>咳嗽草All rights rerved
Printed in U.S.A.
CONTENTS
Foreword (iv)
Committee Roster (v)
议论文600字初中作文1Scope (1)
2Pressure-Temperature Ratings (1)
3Design (2)
4Dimensions (2)
5Materials (3)
6Marking (3)
7Paddle Blank and Spacer Identification (3)
8Testing (3)
Figure
1Line Blanks (2)
Tables
余罪床戏1Dimensions of Class150Raid Face Figure-8Blanks (4)
2Dimensions of Class300Raid Face Figure-8Blanks (5)
3Dimensions of Class600Raid Face Figure-8Blanks (6)
4Dimensions of Class900Raid Face Figure-8Blanks (7)
5Dimensions of Class1500Raid Face Figure-8Blanks (8)
6Dimensions of Class2500Raid Face Figure-8Blanks (9)
7Dimensions of Class150Female Ring-Joint Facing Figure-8Blanks (10)
8Dimensions of Class300Female Ring-Joint Facing Figure-8Blanks (11)
9Dimensions of Class600Female Ring-Joint Facing Figure-8Blanks (12)
10Dimensions of Class900Female Ring-Joint Facing Figure-8Blanks (13)
日剧排行11Dimensions of Class1500Female Ring-Joint Facing Figure-8Blanks (14)
12Dimensions of Class2500Female Ring-Joint Facing Figure-8Blanks (15)
13Dimensions of Class150Male Oval Ring-Joint Facing Figure-8Blanks (16)
14Dimensions of Class300Male Oval Ring-Joint Facing Figure-8Blanks (17)
15Dimensions of Class600Male Oval Ring-Joint Facing Figure-8Blanks (18)
16Dimensions of Class900Male Oval Ring-Joint Facing Figure-8Blanks (19)
17Dimensions of Class1500Male Oval Ring-Joint Facing Figure-8Blanks (20)
18Dimensions of Class2500Male Oval Ring-Joint Facing Figure-8Blanks (21)
懒云Nonmandatory Appendices
A Dimensional Data for Line Blanks in U.S.Customary Units (22)
B References (41)
C Quality System Program (42)
iii
FOREWORD
In July1993,the ASME B16Committee gave to its Subcommittee C the assignment to convert the API590Steel Line Blanks Standard into an ASME standard.The American Petroleum Institute no longer publishes the API590Standard.
The line blanks were designed in accordance with the rules of the ASME B31.3-2002edition. Materials and relevant footnotes have been added following the ASME format.
Significant additions made to this2005edition include reference to the u of all materials listed in B16.5Table1-A plus Metric units.The added materials of construction include additions to class of alloy steels,stainless steels,and nickel alloys.This edition has also been metricated over previous editions to include both U.S.Customary units(in parenthesis)and Metric units in the text,Metric units in dimensional tables in the body,and U.S.Customary units in dimensional tables in Nonmandatory A
nnex A.
All requests for interpretations or suggestions for revisions should be nt to the Secretary, B16Committee,The American Society of Mechanical Engineers,Three Park Avenue,New York, NY10016-5990.
The B16Committee operates under procedures accredited by the American National Standards Institute(ANSI).Following approval by the Standards Committee and ASME,this revision to the1997edition was approved as an American National Standard by ANSI on September19, 2005with the designation ASME B16.48-2005.
iv
龙沙小学
