Store the ttings with the “Mode”-key.
Now the display switches to the lection of the hysteresis. The display is alternating between “h-1“ and the preadjusted value.
To adjust the hysteresis, push the ”Up”- or “Down”-key until the desired value is displayed.
Store the ttings with the “Mode”-key
1x
Example: Switch VS-V-D, output 2 has the operating mode “Window comparator mode“
水是怎么形成的
Switching points are between -0,57 bar and -0,83 bar (lower margin A=-0,57, upper margin b = -0,83)
Further information to the modes e paragraph 8.
Adjusting the operating mode
To lect output 2, push ”Mode”-key 4x
4x wait 2 c
After 2 conds, the display is alternating between
“ou 2“ and “HYS“.
Push the ”Up”- or “Down”-key until “CnP“ for the desired
switching mode “Window Comparator Mode“ is
displayed.
Store the ttings with the “Mode”-key.
1x
Adjusting the lower and the upper margin
To lect the lower margin of output 2, push ”Mode”-key 3x
wait 2 c
After 2 conds, The display is alternating between “A-2“ and the preadjusted value.
Push the ”Up”- or “Down”-key until the desired value is displayed.
Store the ttings with the “Mode”-key.
1x
Now the display switches to the adjustment of the upper margin. The display is alternating between “b-2“ and the preadjusted value.
处的繁体字To adjust the upper margin, push ”Up”- or “Down”-key. Store the ttings with the “Mode”-key.
1x
绿色照片
小雀斑
画什么添足
11. Locking the t values
11.1 Standard versions
Whilst pushing the ”Mode“-key, push the ”Down“-key. The
switch is locked, which means that the t values can’t be
changed. On the display appears ”LoC”, the switch is locked.
hold
When doing this once more, the switch gets unlocked and the
ttings can be changed again.
On the display appears ”UnC”, the switch is unlocked.
hold
11.2 Version with PIN code (VS-...-C)
The lock prevents unauthorid persons changing the ttings.
A 3-digit number combination (PIN code) guarantees that only
辛勤people who know the PIN code (t by the operator) can
change the ttings.
Activating the lock:
To activate the lock, press and hold the “Mode” button, then
hold
Press the “Up” or “Down” button to change the right digit.
The value for the right digit is saved when you press the “Mode”
button. The centre digit flashes.
1x
The centre digit can now be changed. Press the “Mode” button
again to change the left digit.
When the “Mode” button is presd again, the PIN code entered
1x
Deactivating the lock:
黑白卡通图片
To deactivate the lock, press and hold the “Mode” button, then
press the “Down” button.
hold
The saved PIN code must be entered as described above for
locking. If the PIN code is correct, “UnC” is displayed and the
switch is unlocked.
1x
If the PIN code is incorrect, “LoC” is displayed and the switch
remains locked.
1x
If you forget the PIN code saved, the switch can be
unlocked in the SCHMALZ factory.
12. Error messages
* A display change from 0.00 to –FF 0.01 at a
tmospheric pressure is not an error, but caud by
fluctuations in the air pressure.
This can be rectified by tting the zero point.
The zero point must also be t after performing a “Clear
all” (CLA).
吐的反义词
