公司表面处理

更新时间:2023-06-13 21:52:53 阅读：评论：0

0.目录Content

序号NO.	描述Descriptions	页码Page
0	目录content	1
1	引用 Normative reference	3
2	定义Definitions	4
3	流程图Flow chart	8
3.1 jifen	C3级防腐流程图Corrosion protection system C3	8
3.2	C4级防腐流程图Corrosion protection system C4	9
3.3	C5级防腐流程图Corrosion protection system C5	10
4	制造工艺MPPManufacturing Process Plan	11
4.1	进料检验Incoming inspection	11
4.2	清洗 Cleaning	16
4.3	非喷砂面保护Nonsand blasting protection	19
4.4	喷砂Sandblasting	20
4.5	除尘 Dust control	25
4.6	喷锌TSM	27
4.7	TSM修补TSM Repair	30
4.8	拆除工装及螺纹孔保护Fixture remove and thread holes protect	32
4.9	非喷漆面保护Non spraying surface protection	33
4.10	喷雾 Spraying Pre-middle coat	34
4.11	喷涂底漆(如果需要)Sprayingprimer	36

忧郁的句子

4.12	第一层中漆 Spraying1st. middle coat	霸气女销售 38
4.13	第二层中漆Spraying 2nd. middle coat	41
青干4.14	喷涂面漆Spraying top coat	43
4.15	油漆修补 Paint repair	46
4.16	螺纹孔及光洁面防腐保护申请劳动仲裁thread hole and smooth surface corrosion protection	47
4.17	装卸,运输,存储Handling、transportation and storage	49
附件1	系统应用涂层coating system layer and color	50
附件2	修补系统应用涂层maintenance coating system layer and colors	54
附件3	油漆固化与复涂间隔时间interval between primer and mid paint	60
库玛丽女神附件4	相关文件和表单files and records related	62

1：引用血浆胶体渗透压NORMATIVEREFERENCES

ZPS1009606-C01000359Coating systems- Specific technical requir ements涂装系统-特殊技术要求

小鸟嘴面相

ZPS1008682-126906，Steel and aluminum constructions-General technical delivery conditions钢和铝结构-技术交货一般条件

PS2362-30456pray metallization to corrosion category C3 for construction parts and surfaces bolted together腐蚀等级C3的喷锌,针对零件和表面螺栓连接的结构

PS2643-10821Paint System Corrosion Class C3 according to EN ISO12944-2.根据ENISO12944-2腐蚀等级C3的喷漆系统

PS 519219-27858Protection against rust extraction in threaded holes.螺纹孔中的锈的防护

ISO 8501-1Preparation of steel substrates before application ofpaints and related products -- Visual asssment of surfacecleanliness -- Part 1: Rust grades and preparation grades of uncoatedsteel substrates and of steel substrates after overall removal ofprevious coatings;钢材在涂油漆以及有关产品前的基底预处理-表面清洁度的目视测定-第一部分：未涂覆过的钢材基底和全面清除原有涂层后的钢材基底的锈蚀等级和预处理等级。

ISO 8502-3, Preparation of steel substrates before application ofpaint and related products - Tests for the asssment of surfacecleanliness - Part 3:Asssment of dust on steel surfacesprepared for painting (pressure-nsitive tape method);钢材在涂油漆以及有关产品前的基底预处理-表面清洁度的评估测定-第三部分：喷砂后钢板表面灰尘清洁度标准（压敏胶带方法）

ISO 8503-1, Preparation of steel substrates before application ofpaints and related products - Surface roughness characteristics ofblast-cleaned steel substrates - Part 1: Specifications and definitionsfor ISO surface profile comparators for the asssment of abrasiveblast-cleaned surfaces;钢材在涂油漆以及有关产品前的基底预处理-喷射清理钢材的表面粗糙度特性- 第一部分：磨料喷射清理表面粗糙度的ISO评定比较样块的技术要求和定义。

本文发布于:2023-06-13 21:52:53，感谢您对本站的认可！

本文链接：https://www.wtabcd.cn/fanwen/fan/82/947816.html

上一篇：记者面试自我介绍100字记者面试自我介绍(6篇)

下一篇：最新年级写人的作文450字小学三年级写人的作文(六篇)

标签：表面基底技术清洁度钢材系统预处理涂层

留言与评论（共有 0 条评论）