Technical Data Sheet
Shell Tellus® Oils T
High performance hydraulic oils for wide temperature ranges
Shell Tellus Oils T are premium quality hydraulic oils formulated with proprietary anti-wear technology and a shear stable viscosity index improver to enhance and maintain excellent viscosity/temperature characteristics. The oils are designed to meet the requirements of a large range of industrial and mobile hydraulic applications.
Applications
•Hydraulic and fluid power transmission systems subjected to wide variations in temperature or where low viscosity change with fluctuating temperature is required.
Certain critical hydraulic systems can only tolerate small variations in viscosity with fluctuating temperat
ure if efficiency and responsiveness are to be maintained. Hydraulic oils, such as Shell Tellus Oil T, which exhibit multigrade viscosity characteristics may be ud to particular advantage in the circumstances. If even further limited viscosity variations are required Shell Tellus Oils STX should be considered.
Performance Features and Benefits应急措施
•Wide operating temperature range
The u of a specially lected viscosity index improver reduces the viscosity variation with temperature, which helps the system to operate in a wide oil temperature range with more consistent performance. There are various reasons for oil temperature variation in rvice like: environment (ambient) temperature variation, intermediate working condition or variable workload.
•Viscometric characteristics unchanged with time
The excellent shear stability of the viscosity index improver helps minimize permanent viscosity loss allowing the oil to the oil to maintain its original viscometric characteristics at high temperatures. This helps prevent the loss of system efficiency and inadequate protection at the maximum operating temperature. •Outstanding anti-wear performance
Next generation anti-wear additives are incorporated
into the formulation to be effective throughout the range of operating conditions, including low and vere
load conditions. Shell Tellus Oils T exhibit outstanding
performance in a range of piston and vane pump tests;
including the newest Denison T6H (the so called hybrid pump), the tough Denison T6C (dry and wet versions) and the demanding Vickers 35VQ25.
•Hydrolytic stability
Shell Tellus Oils T demonstrate good chemical stability in the prence of moisture, which helps promote long oil life and reduce the risk of corrosion and rusting.
•Excellent filterability
朋友的诗Shell Tellus Oils T are suitable for ultra-fine filtration, an esntial requirement in today's hydraulic sy
stems. Shell Tellus Oils T are virtually unaffected by minor contamination with water and calcium, which are known to cau blockage of fine filters. Customers can u finer filters, which helps achieve all the benefits of using cleaner fluids.
•Oxidation resistant
Shell Tellus Oils T resist oxidation in the prence of air, water and copper. The oils exhibit low increa in acidity, low sludge formation, and low copper loss therefore helping to maintain expected oil drain intervals and minimize maintenance costs.怎么删除小程序
•Thermal stability
Shell Tellus Oils T are thermally stable in modern hydraulic systems working in extreme conditions of load and temperature. Shell Tellus Oils T are highly resistant to degradation and sludge formation therefore helping to improve system reliability and cleanliness.
•Excellent air relea and anti-foam properties Careful u of additives provides quick air relea without excessive foaming. Quick air relea helps minimize cavitation and slows oxidation, helping to maintain system and fluid performance.
•Good water paration
Shell Tellus Oils T exhibit good water paration properties (demulsibility) thereby resisting the formation of water-in-oil emulsions and helping to prevent conquent hydraulic system and pump damage.
Specifications and Approvals
Shell Tellus Oils T have the following approvals: CINCINNATI P-68 (ISO 32)
CINCINNATI P-70 (ISO 46)
CINCINNATI P-69 (ISO 68)
金玉其外DENISON HF-0
DENISON HF-1
DENISON HF-2
Eaton (Vickers) M-2950 S
凉茶草药有哪些
Eaton (Vickers) I-286 S
Shell Tellus Oils T meet the requirements of: Swedish Standard SS 15 54 34 AM
ISO 11158
AFNOR NF-E 48-603 Compatibility
[Shell Tellus Oils T are compatible with most pumps.] However, plea consult your Shell Reprentative before using in pumps containing silver plated components.
Seal & Paint Compatibility
Shell Tellus Oils T are compatible with al materials and paints normally specified for u with mineral oils. Health & Safety
For information on the safe handling and u of this product, refer to its Material Safety Data Sheet at /msds/. If you
are a Shell Distributor, plea call 1+800-468-6457 for all of your rvice needs. All other customers,
plea call 1+800-840-5737for all of your rvice needs. Information is also available on the World Wide Web: /.
Protect the environment
Take ud oil to an authorized collection point. Do not discharge into drains, soil or water.
Typical Physical Characteristics
Shell Tellus Oil T 15 22 32 Product Code
Bulk Drums Pails 500000297
6540700055
6540705203
商业银行中间业务500002851
6540000055
6540005203
500000426
6540100055
6540105203
菲利宾Appearance Light Pale Light Pale Pale Kinematic Viscosity (ASTM D 445)
cSt @ 40°C cSt @ 100°C 15
3.7
22
4.8
32
6.1
Viscosity Index (ASTM D 2270) 140 140 140 Emulsion Test, 130 °F (ASTM D 1401)
Separation time, 30 minutes max
Pass Pass Pass Copper Corrosion (ASTM D 130) 1a 1a 1a Rust Test (ASTM D 665B) Pass Pass Pass Pour Point, °C (ASTM D 5969) -42 -42 -39 Dielectric Strength, kV* (ASTM D 877) 35 min 35 min 35 min * .
Shell Tellus Oil T 46 68 100 Product Code
Bulk Drums Pails 500000431
6540200055公司构架
6540205203
500000293
6540300055
6540305203
500000427
6540400055
----
Appearance Pale Pale Dark Pale Kinematic Viscosity (ASTM D 445)
cSt @ 40°C cSt @ 100°C 46
7.9
68
10.5
100
14.0
Viscosity Index (ASTM D 2270) 140 140 140 Emulsion Test, 130 °F (ASTM D 1401)
Separation time, 30 minutes max
Pass Pass Pass @ 180 °F Copper Corrosion (ASTM D 130) 1a 1a 1a
Rust Test (ASTM D 665B) Pass Pass Pass
Pour Point, °C (ASTM D 5969) -39 -36 -33 Dielectric Strength, kV* (ASTM D 877) 35 min 35 min -----
* On product in aled containers from Shell blending plants only.
