Typical Properties of WONDERLITE® PC
Properties ISO Din Unit
Test
Method
WONDERLITE® PC
Extrusion General Purpo UV Resistant
SAE
Approved
Flame
Retardant PC-108PC-108U PC-110PC-115PC-122PC-110U PC-115U PC-122U PC-110L PC-110V
Melt Volume-Flow Rate1133cm3/10 min300℃×1.2 Kg 6.5 6.51015221015221010
Vicat Softening Temp.30653460℃ 1 Kg, 50℃/hr150148150150150148148148148150℃ 5 Kg, 50℃/hr145143145145145143143143143145
H.D.T7553461℃ 1.80MPa, unanneal128127128128128127127127127128℃ 1.80MPa, anneal143142143143143142142142142143
Izod Impact Strength 180/1A－
KJ/m2
1/8" notched80808075708075708080 180/1U－1/8" unnotched－－－－－－－－－－
Charpy Impact Strength179－
KJ/m2
Notched75757570607570607575－Unnotched－－－－－－－－－－
Tensile Strength52753455MPa50mm/min,yield65656564636564636565 MPa50mm/min,break75757570707570707575减肥搞笑顺口溜
Tensile Elongation52753455%50mm/min120120120120120120120120120120 Flexural Strength17853452MPa2mm/min90909090909090909090 Flexural Modulus17853452MPa2mm/min2400240024002400240024002400240024002400 Ball Identation Hardness2039-153456N/mm2H358/30100100100101102100101102100100
Flammability－UL-94 1.5mm HB
3.0mm HB 1.5mm HB
3.0mm HB
1.5mm V-2
2.5mm V-2
0.4mm V-2
1.5mm V-2
2.5mm V-2
1.6mm V-2
七言绝句格律3.2mm V-2
shuaji0.75mm V-2
1.5mm V-2
0.75mm V-2
1.5mm V-2
0.75mm V-2
3.0mm V-2羊的最佳配偶属相
1.5mm V-2
民族团结的画
贫困生补助1.5mm V-2
3.0mm V-2
6.0mm V-0
Mass Density118353479-A g/cm3 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2
Characteristics/Principal Applications High
Viscosity
约数的定义UV
Stabilized
Medium
Viscosity
Low
企业人才Viscosity
High
Flow
UV
Stabilized
UV
Stabilized
UV
Stabilized
SAE
Approved
3.0mm V-2
Note : This Technical data sheet shown above is for reference only.
