Instruction manual for altimeter/compass digital No. 44 English
INTRODUCTION
This device is a digital product that provides altimeter, barometer, compass, altimeter data, dual time, chronograph, chronograph data and alarm
functions.
Features:
Altimeter
- 1 meter (or foot) resolution and with working range from -700 meters (-2296
feet) to 9000 meters (29520 feet).
- Graphical expression of changes provided.
- Unit in meters or feet lectable.
- 20 memories with date, time and altitude reading.
琵琶谱Barometer
- 1 mbar/hPa resolution and with working range from 300 mbar/hPa to 1100
mbar/hPa.
- Graphical expression of changes provided.
- Both a level pressure and absolute pressure can be shown.
-
Weather forecast.
- Temperature displayed in °F or °C lectable.
Compass
- Electronic compass providing 16 cardinal indications together with bearing
in degrees.
1
- Declination correction provided.
Time
- 2 time modes lectable.
- Prents day of the week, day, hours, minutes and conds (year and month can also be t).
- 12/24-hour formats lectable.
-
Auto-calendar from 2000 to 2049.
Chronograph
- 1/100-cond resolution with working range up to 24 hours.
- 100 memories for lap/split times stored in a maximum of 30 runs.
Alarm
- 2 daily alarms.
- Hourly chime.
新街口美食Electro-luminescent backlight
- 3 conds light up EL backlight
2
3
.
BASIC OPERATION OF BUTTONS
A: - SWITCH AMONG DISPLAYS
- TAKE BEARING
- STORE ALTITUDE DATA (PRESS AND HOLD)
- FORWARD SELECTION OF ALTITUDE DATA
- START/LAP OF CHRONOGRAPH
- RETRIEVE DATA IN RUN
- TURN ALARM ON AND OFF
- FORWARD SETTING (SET OR CALIBRATION)
B: - SWITCH BETWEEN NORMAL TIME AND DUAL TIME (PRESS AND泰式炒饭
HOLD)
- SWITCH BETWEEN UNITS OF TEMPERATURE (PRESS AND
HOLD)
- SWITCH BETWEEN UNITS OF ALTITUDE (PRESS AND HOLD) - REVERSE SELECTION OF ALTITUDE DATA
- STOP CHRONOGRAPH
- STORE CHRONOGRAPH DATA (PRESS AND HOLD)
重点工作计划表- SELECT RUN NUMBER
红包做手工- SWITCH BETWEEN ALARM 1 AND ALARM 2
- REVERSE SETTING (SET OR CALIBRATION)
C: - MODE CHANGE
- DIRECT CHANGE TO TIME MODE (PRESS AND HOLD) - ADVANCE TO NEXT SETTING (SET OR CALIBRATION)
D: - EL BACKLIGHT
- ENTER SET OR CALIBRATION (PRESS AND HOLD)
- CLEAR DATA (PRESS AND HOLD)
- EXIT (SET OR CALIBRATION)
E: - SWITCH AMONG DISPLAYS
-
SWITCH BETWEEN DATE AND ALTITUDE READING DISPLAYS - SHOW NUMBER OF UNUSED LAP
EL BACKLIGHT
Press D for EL backlight with 3 conds auto light up.
4
5 MODE CHANGE OPERATION
There are 9 modes: Normal Time, Dual Time, Compass, Barometer, Altimeter, Altimeter Data, Chronograph,
Chronograph Data and Alarm.
Press C to change from mode to mode, hold down B to switch between Normal Time mode and Dual Time mode as in the following:
* At any mode, holding down C will change to Time mode directly.
NORMAL TIME COMPASS BAROMETER ALTIMETER ALTIMETER DATA
农历腊月是几月C
C
C
C
DUAL TIME
Hold B
CHRONOGRAPH
CHRONOGRAPH DATA
ALARM
C C
C
C
6 TIME MODE
U C to enter Time mode.
* Mode prompt “TIME” is displayed first.
- There are 2 time modes, Normal Time (indicated by T1) and Dual Time (indicated by T2), and they
宸读音
三点水一个猪count up individually with the same cond. - There are 3 displays for time. They are Time, Time with Barometer and Time with Weather.
- There is an auto-calendar from 2000 to 2049.
To switch between Normal Time and Dual Time
Hold down B until the mode indicator (T1 or T2) stops flashing to switch between Normal Time mode and Dual Time mode.
To switch among the 3 time displays
U A or E to switch among the 3 displays for time.
* “TIME”, “BAROMETER” or “WEATHER” is displayed first.
Normal Time
PM indicator
AM indicator Dual Time indicator
