不想怎么写辞职书
初始配置WLC－建立连接
第一步：为ISR路由器的WLC接口配置IP地址
WLC-router#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
野菊花作文WLC-router(config)#interface wlan-controller 1/0
WLC-router(config-if)#ip address 192.168.10.254 255.255.255.0
WLC-router(config-if)#no shut
WLC-router(config-if)#end
第二步：测试连通扫雷怎么玩的技巧
卢进勇
WLC-router#ping 192.168.10.254
Type escape quence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.10.254, timeout is 2 conds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
WLC-router#
访问WLC模块
WLC-router#rvice-module wlan-controller 1/0 ssion
Trying 192.168.10.254, 2066 ... Open
Ur:cisco
可怜英语Password:*****
(Cisco Controller) >
如果不是第一次进入，可以出现进不去的现象：
WLC-router#rvice-module wlan-controller 1/0 ssion
Trying 192.168.10.254, 2066 ...
% Connection refud by remote host
WLC-router#rvice-module wlan-controller 1/0 ssion clear
[confirm]
[OK] 辣条制作过程恶心
WLC-router#rvice-module wlan-controller 1/0 ssion
Trying 192.168.10.254, 2066 ... Open
Ur:cisco
初始配置WLC模块
购红酒
如果是新的WLC，或者不再想要已有配置的社保卡申请WLC模块，只要进行如下的命令操作，均可以进入快速安装对话向导：
(Cisco Controller) >clear config
Are you sure you want to clear the configuration? (y/n) y
Configuration Cleared!
(Cisco Controller) >ret system
The system has unsaved changes.
Would you like to save them now? (y/N) n
Configuration Not Saved!
Are you sure you would like to ret the system? (y/N) y
System will now restart!
Initializing memory. Plea wait…
Welcome to the Cisco Wizard Configuration Tool
U the '-' character to backup
System Name [Cisco_e8:f6:00]: WLC
Enter Administrative Ur Name (24 characters max): cisco
Enter Administrative Password (24 characters max): *****
