03-2012, Rev. 0312
<海口骑楼
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification让风筝飞
according to IEC 61810-1 and to be ud
only together with the ‘Definitions’ ction.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ ction, available at
Datasheets, product data, ‘Definitions’ c-
tion, application notes and all specifications
are subject to change.
1 Power PCB Relay T9S Solar
Insulation Data
Initial dielectric strength
between open contacts 2500V rms
厦门休闲between contact and coil 4000V rms
Clearance/creepage
between contact and coil 3/4mm
Material group of insulation parts III
Tracking index of relay ba PTI 325
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
Ambient temperature -40 to +85°C1)
Category of environmental protection
IEC 61810 RTII - flux proof
Vibration resistance (functional) 10g
Shock resistance (functional) 10g
Shock resistance (destructive) 100g
Terminal type PCB-THT
Mounting e note1)
Mounting distance ≥10mm
Weight 30g
Resistance to soldering heat THT
IEC 60068-2-20 260°C/5s
Packaging unit box/500 pcs.乘法函数
1) The relay connections and wiring have to be designed with an adequate cross ctions
to ensure the current flow and heat dissipation.
n 1 pole 35A, 1 form A (NO) contact
n Contact gap >1.5mm
n 350mW hold power
n Ambient temperature up to 85°C at 35A
n The appliance is able to meet VDE V 0126-1-1 n Product in accordance to IEC 60335-1
n EN61095: AC7a at 85°C
Typical applications
Photovoltaic inverter
A p p rovals
VDE 40030974, UL E58304
Contact Data
Contact arrangement 1 form A (NO)
Contact gap >1.5mm
Rated voltage 277VAC
柠檬的英语秀bRated current 35A1)
Breaking capacity max. 8750 VA
Contact material AgNi
Frequency of operation, with/without load 6/300min-1
Operate/relea time max., incl bounce time 18/15ms
Contact ratings
Type Contact Load Cycles
IEC 61610
T9SV1K15-12 A (NO) 35A, 250VAC, cosφ=1, 85°C 30x103
UL 508
T9SV1K15-12 A (NO) 35A, 277VAC, resistive, 85°C 30x103 Mechanical endurance, DC coil 1x106 operations
1) The relay connections and wiring have to be designed with an adequate cross ctions
研学日记
to ensure the current flow and heat dissipation.
Coil Data
Rated coil voltage 12VDC
Coil insulation system according UL class F
Coil versions, DC coil
Coil Rated Operate Relea Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% W
12 122)9.6 0.8 64+10% 2.25 /
min.
0.35
hold
老人晚上尿次数太多怎么解决2) After the energization time of 50 ms with 12 VDC the coil requires a reduction of the coil
voltage to 6.0 VDC.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
f0156_bc_inv
U
03-2012, Rev. 0312
<
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification
according to IEC 61810-1 and to be ud
only together with the ‘Definitions’ ction.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ ction, available at
Datasheets, product data, ‘Definitions’ c-
tion, application notes and all specifications
are subject to change.
2Product code Version Contact arrangement Contact material Coil Part number T9SV1K15-12 PCB, flux tight 1 form A (NO) contact AgNi 12VDC 2027395-1
