0.5吨中频炉技术说明英文翻译
0.5-ton intermediate frequency furnace
大家一起做游戏按我公司设计由KGPS可控硅中频电源配0.5吨中频炉两台用于铸钢熔炼。
Our company designed KGPS intermediate frequency power supply with two0.5-ton intermediate frequency induction heating furnace for steel melting.
一、0.5吨中频炉技术参数设备配置
设备型号GWT-0.5/400400KW配置350KW配置
设备额定功率400KW350KW
拆信打一地名进相电压3*380V3*380V微信怎么更改密码
电炉额定电压1500V1500V
额定容量0.5T0.5T
额定温度1600℃1600℃
配电源规格KGPS-0.5/400KGPS-0.5/350
成套配置单：快速KGPS中频电源一套
补偿电容柜一套
电脑换显卡
炉子二台
减速机二台
水冷电缆两根
坩埚膜一只
说明书资料一份
关于中国传统文化的作文游戏歌0.5-ton aluminum-shell intermediate frequency furnace technical parameters
Model
GWT-0.5/400
Index Index
Rated power400KW350KW
Pha voltage3*380V3*380V
Rated voltage1500V1500V
Rated capacity0.5T0.5T
Rated temperature1600℃1600℃
Power specifications KGPS-0.5/400KGPS-0.5/350
Complete configuration：Fast12pul frequency
power supply
A t Compensation capacitor A t Intermediate frequency
furnace
Two Reducer Two Water cooled cables Two Crucible film One Instructions for u One
二、水冷设备：可以在生产现场筑水池，通过水泵使水循环对设备进行冷却，也可选用整套组合型冷却设备。炉体和电源分别采用两套独立（也可采用一套）的全封闭冷却装置。
采用相互独立的二套冷却装置的目的是为了避免相互影响。冷却塔的下面有集水盘，内装喷淋用水，集水盘的进水口装有浮球阀，能够自动控制集水盘内的水位，出水口有喷淋水泵。因为中频电源需要低温的冷却水，出水温度要控制在55以内，由于电炉感应线圈的冷却水温度略高，这样反而能够提高电炉的热效率，同时减小冷却装置的体积，进而减低造价。全封闭冷却装置的核心是喷淋蒸发式封闭冷却塔。在冷却塔内部有许多散热盘管，循环水在盘管内部流动，与空气不接触。冷却塔的上部装有喷水口和冷却风机。工作时喷淋水泵将水泵到上部的喷水口，将水呈雾状喷淋到盘管外表面，冷却风机同时抽风，使喷淋水汽化从而带走盘管内循环水的热量。这种先进型式的冷却装置具有很高的换热效率。建议采用FSS-200封闭式循环冷却塔，能大量节约生产场地占地面积。
Water cooler:(optional)
Builting pools in the production site to cool water through the pump cycles on the devices,or choosing the package combination of cooling equipment.Furnace and power respectively adopt a t of fully clod cooling device(or a t together).Using two ts of cooling device in order to avoid interaction.Water collecting tray under the cooling tower,built-in spray water,is equipped with a float ball valve in its inlet,can automatically control the water level of a water collecting tray, and its outlet also has a spray pump.The intermediate frequency power need low temperature cooling water,outlet water temperature should be controlled at55°C or less,the electric induction coil cooling water temperature is slightly higher, so it can improve the heat efficiency of the furnace,while reducing the volume of cooling device,and reduce the cost.Core of the fully clod cooling device is spray evaporative clod cooling tower.There are a lot of radiating coil in the cooling tower,circulating water flow in the coil,so it is isolated from the air.The upper part is provided with a water outlet of cooling tower and cooling fan.When working,the spray pumps water to the upper part of the spout,the water mist spray onto the surface of the coil,at the same time,cooling fan exhausting to vaporize spray water,carry off circulating water heat inside the coil.The advanced method of cooling device has high heat exchange efficiency.FSS-200clod circulating cooling tower is recommended,
which can save large production sites.Circulating water cooling equipment technical parameters
三、循环水冷却设备技术参数如下表：
设备型号FSS-200
海看冷却能力（kcal/h）172000
工作流量（m3/h）18-35
工作水压（Mpa）0.2
进出水管口径DN50
额定功率主水泵（KW） 2.2孕妇板蓝根
风机（KW）0.55*2
喷淋泵（KW）0.75
电源（V）380
主机外形尺寸（mm）1800*1300*1200
空机重量（kg）600
Model FSS-200
Cooling capacity（kcal/h）172000
Working flow（m3/h）18-35
Working pressure（Mpa）0.2
Pipe diameter DN50
Rated power Main pump（KW） 2.2
cooling fan（KW）0.55*2
Spray pump（KW）0.75
Power（V）380
Host Size（mm）1800*1300*1200
Empty weight（kg）600
四、0.5吨中频炉简介：
1、电源采用并联谐振电路，控制电路完全集成化，中频电源采用零电压软起动。操作十分方便，稳定可靠，无故障时间长，检修方便，维修费用低。
2、中频电源有过压、过流、缺相、欠压、欠水压，冷却水温超限报警保护等多项功能，安全可靠。
3、在合适的功率下稳定运行，熔化速度快，生产效率高。
4、采用三相全桥整流，高次谐波小，对电网无干扰，同时变压器不发热，损耗极低。
5、电源工作时节约电能，节水，体积小，重量轻，使用安全，使用范围广泛。
Introduction
1.Power adopts a parallel resonant circuit,the control circuit is fully integrated, intermediate frequency power zero voltage soft start.Convenient operation and maintenance,stable,reliable,low repair cost.
2.Intermediate-frequency power source has many functions,including overvoltage, overcurrent,lack-pha,under-voltage,lack of water,cooling water temperature overrun alarm protection,it’s safe and reliable.
3.Melting fast and high production efficiency when Stable power and stable operation.
4.Three-pha full-bridge rectifier,small high-order harmonics,without interference on power grid,the transformer does not heat and low loss.
5.When power works,electric and water is saved.Small volume,light weight,safty, wide ud
五、0.5吨中频炉加热特点：
1、中频炉熔炼工艺稳定，铸件有较高的机械强度；
2、氧化损耗少，可实现无氧化熔炼，减少熔化损耗；
3、铁液中自身存在电磁搅拌作用，金属成分均匀，可熔炼各种加工切屑和细小的边角料，降低成本；
4、减少环境污染；
5、功率密度大，熔化速度快，起熔方便；
6、操作使用灵活方便，频率可选择；
7、土建费用小；
8、精湛的线圈设计，优质的厚壁铜管，通过合理选择感应圈的匝间距离使得感应圈的转换效率最高，电阻最小，更多的能量可用于熔炼、加热，强度高，线圈不易发生因电弧和膨胀力引起损坏。
Heating characteristics
1.Intermediate frequency furnace smelting process is stable,the castings have high mechanical strength
2.Oxidation loss,no oxidation melting,reduction of the melting loss
3.Liquid iron have electromagnetic stirring itlf and homogeneous metal components,can smelt any chip and small scrap,reducing cost
4.Reduce environmental pollution
5.High power density,fast melting,start melting conveniently
6.Flexible and convenient operation,lected frequency
7.Low construction costs
8.Superb coil design,high quality thick-walled copper tubes,Rational lection
of induction loop interturn distance makes the highest conversion efficiency of induction coil,resistance minimum,so more energy can be ud for melting,heating, high strength,coils are prone to damage due to arc and expansive fo rce.
作者：康忠波永鑫电炉城站长
